WWW.PHIHONG.COM 100W Constant Current LED Driver PDA100W LED Power Supply Non-Dimming Features  OVP, OTP Short and Open Circuit  IP66 Rated Protections  108-304VAC Input Range  Brownout Protection  Wide Operating Temperature Range  High Efficiency  ≥ 0.9 Power Factor Correction & THD 20% Applications  General Lighting  Outdoor Lighting  Street Lighting  Architectural Lighting Safety Approvals  cUL/UL 8750 Mechanical Characteristics  Length: 241mm (9.49in)  Height: 39mm (1.54in)  Width: 59mm (2.32in)  Weight: 1050g (37.04oz) Output Specifications DC Output Voltage Output Output Model Current Min. Typ. Max. Power PDA100B-700GB 93V 136V 143V 700mA 100W PDA100B-1A0GB 65V 95V 100V 1050mA 100W PDA100B-1A4GB 46V 58V 72V 1400mA 100W PDA100B-1A8GB 34V 45V 57V 1750mA 100W PDA100B-2A1GB 30V 36V 48V 2100mA 100W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 4/15/2015 WWW.PHIHONG.COM PDA100B Constant Current Characteristics Input: EMC FCC Part 15 Class A AC Input Voltage Range 108VAC to 304VAC Immunity Nominal AC Input Voltage IEC61000-4-2 120 to 277VAC IEC61000-4-5 IEC61000-4-11 AC Input Frequency IEC61000-3-2 Class C 47~63Hz Input Over Current Protection Maximum Input Current The input power line will be fused with a 3.15A fuse ≤ 1.26A Short-Circuit Protection Leakage Current The Driver will withstand a short circuit across the outputs 0.75mA maximum at 277VAC Input without damage. Inrush Current Over Temperature Protection < 80A The load will drop by 50% automatically if the case temperature exceeds the recommended limit. OUTPUT: Over Voltage Protection Power Factor During no load condition, the over voltage protection ≥ 0.9 trigger level should be less than 195Vrms. Output Current Ripple <105mA (p-p) Dielectric Withstand (Hi-pot) Test Primary to secondary: 4242VDC for 1 minute, 5.5mA Efficiency Model Typical Efficiency Insulation Resistance PDA100B-700GB 91% Primary to secondary: >5M Ohm 500VDC, 1 Minute PDA100B-1A0GB 91% PDA100B-1A4GB 89% PDA100B-1A8GB 89% PDA100B-2A1GB 89% Wire Connections Terminal Position Specification Length Turn-on Delay Time Color <0.5s maximum at nominal AC Power ON Line Black AWG18 Solid Wire 390mm Neutral White AWG18 Solid Wire 390mm Environmental: Ground Green/Yellow AWG18 Solid Wire 390mm Temperature Vout+ Red AWG18 Solid Wire 390mm Operation Tc -40 to 83°C Vout- Blue AWG18 Solid Wire 390mm Non-operation -40 to +90°C Operating Humidity 5 to 98% Warranty 5 Years WWW.PHIHONG.COM Dimension Diagram Unit:mm PDA100B Characteristics Total Harmonic Distortion vs. Load Power Factor vs. Load Efficiency vs. Load for PDA100B-700GB Lifetime vs. Tc