PHIHONG PDA150B-S1A7G

Description
150 W, Single Output, 89 VDC@1.68 A LED Lighting AC-DC Power Supply
Part Number
PDA150B-S1A7G
Price
Request Quote
Manufacturer
PHIHONG
Lead Time
Request Quote
Category
Circuit Protection » AC-DC Power Supply
Specifications
Manufacturer
Phihong
Manufacturers Part #
PDA150B-S1A7G
Industry Aliases
PDA150B-S1A7G
Series
PDA150B
Factory Pack Quantity
2500
Dimensions
9.49 x 2.32 x 1.54"
Dimming Capability
No
Driving Method
Constant Current
Efficiency
94%
Industry
LED Lighting
Input Voltage Nominal
120 VAC to 277 VAC
IP Rating
IP66
Isolation
4240 VDC
Mechanical Style
LED Power Supply
Mounting
Chassis
Number of Outputs
1
Operating Temperature
- 40 to + 85°C
Output Amps 1
1.68 A
Output Voltage V1 Nominal
89 VDC
Power
150 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
PHIHONG’S 150W CONSTANT CURRENT DRIVERS WITH 94% EFFICIENCY PROVIDE TRULY ADVANCED PERFORMANCE Output Voltage Output Current Output Power 0V~425V 0.35A 150W 0V~280V 0.53A 150W 0V~210V 0.7A 150W 0V~140V 1.05A 150W 0V~100V 1.5A 150W 0V~89V 1.68A 150W PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Electrical Specifications: Output Output Output Tcase Input Max Min Surge Input Inrush Power Voltage Current Max Power THD Power Protection Part Number Current (A) Current (W) (V) (A) (C) (W) (%) Factor (KV) 150 0V~425V 0.35 PDA150B-S350G-R 150 0V~280V 0.53 PDA150B-S530G-R 150 0V~210V 0.7 1.4A@120VAC PDA150B-S700G-R 80 164 ≤ 30A 12 0.9 4.0 0.6A@277VAC 150 0V~140V 1.05 PDA150B-S1A0G-R 150 0V~100V 1.5 PDA150B-S1A5G-R 150 0V~89V 1.68 PDA150B-S1A7G-R Wiring Diagram Input, Output use lead-wires. Lead-wires are 18AWG 105C/600V solid Copper. Standard Lead Length Color In. Cm. Black 10 25 White 10 25 Blue 10 25 Red 10 25 Length: 241mm (9.49in) Width: 59mm (2.32in) Height: 39mm (1.54in) Maximum Wiring Distance (at Full Load) Weight 1043g (2.3lbs) Wire Size (AWG) Distance (Feet) 26 8 Dimension Diagram 24 13 22 21 20 34 18 54 16 85 14 137 12 210 10 357 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Installation & Application Notes: Section I – Physical Characteristics 1.1 LED Driver shall be installed inside an electrical enclosure. 1.2 Wiring inside electrical enclosure shall comply with 600V/105°C rating or higher. Section II – Performance 2.1 LED Driver complies with UL standard UL8750 2.2 LED Driver has Class A sound rating. 2.3 LED Driver has a minimum ambient operating temperature of -40°C. 2.4 LED Driver has a life expectancy of 50,000 hours at Tcase of ≤80°C. 2.5 LED Driver has a life expectancy of 100,000 hours at Tcase of ≤65°C. 2.6 LED Driver has a typical self rise of 25°C at maximum load in open air without heat sink. 2.7 LED Driver maximum allowable case temperature is 80°C – see product label for measurement location. 2.8 LED Driver reduces output power to LEDs if max allowable case temperature is exceeded. 2.9 LED Driver has a failure rate of ≤0.01% per 1,000 hours at Tcase ≤70°C. 2.10 LED Driver tolerates sustained open circuit and short circuit output conditions without damage. 2.11 LED Driver complies with the requirements of the Federal Communications Commission (FCC) rules and regulations, Title 47 CFR Part 15 Non-Consumer (Class B). Section III – UL Conditions of Acceptability (File E321253) When installed in the end-use equipment, the following are among the considerations to be made: 3.1 The equipment shall be installed in compliance with the enclosure, mounting, spacing, casualty and segregation requirements of the ultimate application. 3.2 Consideration should be given to measuring the temperatures on electronic components of power circuits and transformer windings when the unit is installed in the end-use equipment based upon mounting orientation, operating ambient and ventilation. 3.3 These drivers should be used within the recognized ratings. 3.4 The driver is suitable for use in “DAMP” and “DRY” locations. 3.5 The maximum available output parameters from the (0-10V) dimming circuit provided on LED driver model PDA150W Series were tested in accordance with supplement (SB) of UL935 and was found permissible for connection via Class 2 wiring. 3.6 When the drivers are installed in the end-use application, the case temperature should not exceed the temperature limit specified. 3.7 The maximum measured leakage current was 0.2mA while connected to a 277V source of supply. PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Electrical Specifications Input: EMC EN55015/CISPR 15/FCC 47 Part 15/18 Class B AC Input Voltage Range 90VAC to 305VAC Immunity IEC61000-4-2 AC Input Frequency IEC61000-4-3 47~63Hz IEC61000-4-4 IEC61000-4-5 Maximum Input Current IEC61000-4-6 ≤ 2A IEC61000-4-8 IEC61000-4-11 Leakage Current IEC61000-3-2 Class C 0.5mA maximum at 277VAC Input Output Over Current Protection Inrush Current The power supply will withstand continuous output overload ≤ 30A Short-Circuit Protection OUTPUT: The PSU will withstand a short circuit across the Power Factor outputs without damage ≥ 0.9 Over Voltage Protection Ripple and Noise Output is protected from no load and over voltage conditions ≤5% of the Output Current Dielectric Withstand (Hi-pot) Test Efficiency (Typical) Primary to secondary: 4242VDC for 1 minute, 5.5mA 94% at 230~ 277VAC 92% at 120VAC Insulation Resistance Primary to secondary: >5M Ohm 500VDC, 1 Minute Turn-on Delay Time <1s maximum at nominal AC Power ON Lifespan 50K Hours at full output power, 50°C ambient, Tcase <80°C Environmental: Temperature Wire Connections Operation -40 to +85°C (*) Position Terminal Color Specification Non-operation -40 to +85°C Line Black AWG18 Solid Wire Operating Humidity 10 to 95% Neutral White AWG18 Solid Wire (*) Case Temperature <80°C Ground Green/Yellow AWG18 Solid Wire Vout+ Red AWG18 Solid Wire Vout- Blue AWG18 Solid Wire Warranty 5 Years PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150B Series Brand Name Phihong LED Driver Description 150W, Non-Dimmable LED Driver Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the PDA150B-S1A7G?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods