PHIHONG’S 150W CONSTANT CURRENT DRIVERS WITH 94% EFFICIENCY PROVIDE TRULY ADVANCED PERFORMANCE Output Voltage Output Current Output Power 0V~425V 0.35A 150W 0V~280V 0.53A 150W 0V~210V 0.7A 150W 0V~140V 1.05A 150W 0V~100V 1.5A 150W 0V~89V 1.68A 150W PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Electrical Specifications: Output Output Output Tcase Input Max Min Surge Input Inrush Power Voltage Current Max Power THD Power Protection Part Number Current (A) Current (W) (V) (A) (C) (W) (%) Factor (KV) 150 0V~425V 0.35 PDA150W-S350G-R 150 0V~280V 0.53 PDA150W-S530G-R 150 0V~210V 0.7 PDA150W-S700G-R 1.4A@120VAC 80 164 ≤ 30A 12 0.9 4.0 150 0V~140V 1.05 0.6A@277VAC PDA150W-S1A0G-R 150 0V~100V 1.5 PDA150W-S1A5G-R 150 0V~89V 1.68 PDA150W-S1A7G-R Wiring Diagram Dimming Min. Output Dimming Range Method Power (W) 0-10V 2%~100% 1.0 Input, Output, 0-10V Dimming and Auxiliary use lead-wires. Lead-wires are 18AWG 105C/600V solid Copper. Standard Lead Length Color In. Cm. Black 10 25 White 10 25 Blue 10 25 Red 10 25 Gray 10 25 Length: 241mm (9.49in) Violet 10 25 Width: 59mm (2.32in) Yellow 10 25 Height: 39mm (1.54in) Weight 1043g (2.3lbs) Maximum Wiring Distance (at Full Load) Wire Size (AWG) Distance (Feet) Dimension Diagram 26 8 24 13 22 21 20 34 18 54 16 85 14 137 12 210 10 357 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Installation & Application Notes: Section I – Physical Characteristics 1.1 LED Driver shall be installed inside an electrical enclosure. 1.2 Wiring inside electrical enclosure shall comply with 600V/105°C rating or higher. Section II – Performance 2.1 LED Driver complies with UL standard UL8750 2.2 LED Driver has Class A sound rating. 2.3 LED Driver has a minimum ambient operating temperature of -40°C. 2.4 LED Driver has a life expectancy of 50,000 hours at Tcase of ≤80°C. 2.5 LED Driver has a life expectancy of 100,000 hours at Tcase of ≤65°C. 2.6 LED Driver has a typical self rise of 25°C at maximum load in open air without heat sink. 2.7 LED Driver maximum allowable case temperature is 80°C – see product label for measurement location. 2.8 LED Driver reduces output power to LEDs if max allowable case temperature is exceeded. 2.9 LED Driver has a failure rate of ≤0.01% per 1,000 hours at Tcase ≤70°C. 2.10 LED Driver tolerates sustained open circuit and short circuit output conditions without damage. 2.11 LED Driver complies with the requirements of the Federal Communications Commission (FCC) rules and regulations, Title 47 CFR Part 15 Non-Consumer (Class B). Section III – UL Conditions of Acceptability (File E321253) When installed in the end-use equipment, the following are among the considerations to be made: 3.1 The equipment shall be installed in compliance with the enclosure, mounting, spacing, casualty and segregation requirements of the ultimate application. 3.2 Consideration should be given to measuring the temperatures on electronic components of power circuits and transformer windings when the unit is installed in the end-use equipment based upon mounting orientation, operating ambient and ventilation. 3.3 These drivers should be used within the recognized ratings. 3.4 The driver is suitable for use in “DAMP” and “DRY” locations. 3.5 The maximum available output parameters from the (0-10V) dimming circuit provided on LED driver model PDA150W Series were tested in accordance with supplement (SB) of UL935 and was found permissible for connection via Class 2 wiring. 3.6 When the drivers are installed in the end-use application, the case temperature should not exceed the temperature limit specified. 3.7 The maximum measured leakage current was 0.2mA while connected to a 277V source of supply. PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 Electrical Specifications Input: AC Input Voltage Range EMC 90VAC to 305VAC EN55015/CISPR 15/FCC 47 Part 15/18 Class A AC Input Frequency Immunity 47~63Hz IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 Maximum Input Current IEC61000-4-5 ≤ 2A IEC61000-4-6 IEC61000-4-8 Leakage Current IEC61000-4-11 0.5mA maximum at 277VAC Input IEC61000-3-2 Class C Inrush Current Output Over Current Protection ≤ 30A The power supply will withstand continuous output overload OUTPUT: Short-Circuit Protection Power Factor The PSU will withstand a short circuit across the ≥ 0.9 outputs without damage Ripple and Noise Over Voltage Protection ≤5% of the Output Current Output is protected from no load and over voltage conditions Efficiency (Typical) Dielectric Withstand (Hi-pot) Test 94% at 230~ 277VAC Primary to secondary: 4242VDC for 1 minute, 5.5mA 92% at 120VAC Insulation Resistance Turn-on Delay Time Primary to secondary: >5M Ohm 500VDC, 1 Minute <1s maximum at nominal AC Power ON Lifespan Environmental: 50K Hours at full output power, 50°C ambient, Tcase <80°C Temperature Operation -40 to +85°C (*) Wire Connections Non-operation -40 to +85°C Position Terminal Color Specification Operating Humidity 10 to 95% Line Black AWG18 Solid Wire (*) Case Temperature <80°C Neutral White AWG18 Solid Wire Ground Green/Yellow AWG18 Solid Wire Vout+ Red AWG18 Solid Wire Dimming Function Vout- Blue AWG18 Solid Wire Dimming Control Dim+ Violet AWG18 Solid Wire 0-10VDC Dim- Grey AWG18 Solid Wire Aux Yellow AWG18 Solid Wire Dimming Grounding Dim(-) and Vout(-) must never be connected together to ensure Warranty proper operation and isolation requirements 5 Years Aux Grounding Aux return and Dim return are common PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014 PDA150W Series Brand Name Phihong LED Driver 150W, 0-10V Isolated Dimming with 20V Description Auxiliary Output for Peripherals Input Voltage 120 ~ 277VAC Input Frequency 50/60Hz Safety CE, UL, RoHS IP Rating IP66 PHIHONG TECHNOLOGY CO., LTD. 47800 Fremont Blvd., Fremont, CA 94538 • T: 1-510-445-0100 • www.phihong.com/LED Revision 7/2/2014