WWW.PHIHONG.COM 20W Single Port Power over Ethernet Midspan IEEE802.3AF Compliant Power Injector Features  Compliant with IEEE802.3AF Standard  Limited Power Source  Non-vented Case  Gigabit Compatible  Full Protection OVP, OCP  1 year warranty Applications  IP Telephones  Security Cameras  Wireless Access Points  IP Print Servers ® ®  Bluetooth Access Points  WiMAX Access Points Safety Approvals  CE  cUL/US Mechanical Characteristics  Length: 140mm (5.51in.)  Height: 36mm (1.42in.)  Width: 65mm (2.55in.)  Weight: 0.2Kg (7.58oz) Output Specifications DC Output Load Regulation Model AC Input Voltage Min. Max. Line Load POE29U-1AF Three Wire 56V 10mA 357mA ±5% POE29W-1AF Two Wire 56V 10mA 357mA ±5% Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 6/22/2015 WWW.PHIHONG.COM POE29x-1AF Characteristics INPUT: EMI AC Input Voltage Rating EN55022 Class B 100 to 240VAC FCC part 15 Class B AC Input Voltage Range EMC 90 to 264VAC ESD: IEC61000-4-2 Level 3 RS: IEC61000-4-3 Level 3 AC Input Current EFT/Burst: IEC61000-4-4 Level 2 0.8A (RMS) maximum at 120VAC Surge: IEC61000-4-5 Level 3 0.55A (RMS) maximum at 240VAC CS: IEC61000-4-6 Level 3 Voltage Dips: IEC61000-4-11 Harmonic: IEC61000-3-2 Class A AC Input Frequency 47 to 63Hz Isolation (HI-POT) Primary to secondary: 1500VAC for 1 minute, 10mA Leakage Current 350uA maximum for U models 250uA maximum for W models Insulation Resistance Primary to secondary: 10M Ohm 500VDC Max In-rush Current 60A maximum at 240VAC and maximum load FEATURES: (Cold Start at ambient 25°C) Over Voltage/Current, Short Circuit Protection The output is equipped with short-circuit protection and OUTPUT: overload protection as per the IEEE 802.3af specification and conforms to UL60950-2. The output can be shorted Output Power permanently without damage. 20W Indicator Hold up Time Solid Green: Valid IEEE802.3af load detected and 10mSec minimum at maximum load at 120VAC, 60Hz connected “ON” Blinking Green: Power “ON” ready for connection Transient O/P Voltage Protection Blinking Green/Red: Invalid load connected 60V maximum at switch on/off at any AC line phase Blinking Red/Green: fault Efficiency AC Input Connector 80% Typical at maximum load at 120VAC, 60Hz IEC320 C14 - U Models – three wire IEC320 C8 – W Models – two wire Environment Operating Temperature -20 to +50°C Output Connection Non-operating Temperature -20 to +70°C +pins 3,6 / -pins 1,2 Relative Humidity 5 to 90% Data IN/POE OUT Connector Dimension Diagram Unit: mm RJ45 Warranty 1 Year