WWW.PHIHONG.COM 4/8 Ports 60W per Port Midspan POE480U for 10/100/1000 Base-T Networks Features • Proprietary Detection, Disconnect and • 19” Rack Mounting Kit Ships with Overload Protection Unit • Low Cost • Full Protection OTP, OCP, OVP • Gigabit Compatible • 48V RPS Input (Optional) • No Power Management required • 1 Year Warranty • Full Power -- 60W per Port Applications • Wireless Access Points • Security Systems • Computer Workstations • IP Cameras Safety Approvals • cUL/UL • CE Mechanical Characteristics • Length: 438mm (17.25in) • Height: 44.5 mm (1.75in) • Width: 228mm (8.98in) • Weight: 1.0Kg (2.5lbs) Output Specifications Model Number of Ports POE480U-4UP 4 POE480U-8UP 8 Reference files: Multiport_Midspan_Installation_Manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 1/11/2018 POE480U-UP Characteristics WWW.PHIHONG.COM INPUT: Turn-On Delay Time AC Input: 10 sec max at max load, and 120VAC 60Hz, Voltage Range 25Hz 90 to 264VAC ENVIRONMENTAL: Temperature Input Frequency Operation 0 to +40°C 47-63Hz Non-operation -25 to +65°C Humidity 5 to 90% Input Current: 7.5A (RMS) max for 90VAC EMI 3A (RMS) max for 240VAC EN55022 Class B, FCC Class B with FTP cabling Leakage Current EN55022 Class A, FCC Class A with UTP 3.5mA max @ 254VAC 60Hz cabling AC Inrush Current Isolation Test 30A (RMS) max for 115VAC Primary to Secondary: 4242VDC for 1 minute DC Input (Optional) Primary to Ground: 2121VDC for 1 minute Voltage Range Secondary to Ground: 2121VDC for 1 44-57VDC. Source should be SELV and minute isolated from ground by 1500Vac Immunity EN50082-1 Input Current ESD: EN61000-4-2. Level 3 10A Max RS: EN61000-4-3. Level 2 EFT: EN61000-4-4. Level 2 OUTPUT: Surge: EN61000-4-5. Level 3 Output Power CS: EN61000-4-6. Level 2 60W per port Voltage Dips EN61000-4-11 240-480W Total Power Harmonic: EN61000-3-2 Class A Ripple and Regulation IEEE 802.3af Interoperability 100mV maximum 12.5k detection resistance required for full power Efficiency UNH Interoperability report available upon 75% (typical) at max load, 120VAC 60Hz request Hold-up Time FEATURES: 16mS min. at max load, 120 VAC 60Hz Over Voltage/Current, Short Circuit Protection Transient O/P Voltage Protection The output can be shorted permanently 60V max at switch on/off at any AC line without damage. Phase POE480U-UP Characteristics WWW.PHIHONG.COM Over Temperature Protection Input Connector Automatic shutdown without damage AC Input IEC320 C14 DC Input Molex 39-30-0060 Indicators Green LED: Power detected “CONNECT” Output Connection at 60W 4-pair powering for full power: Yellow LED: Fault detected Pines 3, 6, 4 5(+) Pines 1, 2, 7, 8 (-) USB Diagnostics Port and NIC Interface USB “B” port for diagnostics and manual port control Windows GUI NIC interface for remote management via secure IP access Dimension Diagram: mm