WWW.PHIHONG.COM 12W Wall Plug Adapter PSA12x Adapter Series Meets EISA and Ecodesign Requirements Features  Double Insulated  Less Than 0.3W No-Load Current  Class B EMI  Over-Voltage Protection  Ecodesign ErP Directive 2009/125/EC  Efficiency Level V Compliance level 2 annex 1b Compliant Applications  Wireless Communications  Portable Equipment  Networking  Peripherals Safety Approvals  cUL/UL (A-Model)  TUV (E-Model)  BSMI (A-Model)  CE (E-Model) (1) Mechanical Characteristics  Length: 71.5mm (2.81in)  Height: 46mm (1.81in)  Width: 33.75mm (1.33in)  Weight: 85g (3.00oz) Output Specifications (2) Load Ripple Regulation Efficiency DC Output (3) Model Voltage Min. Max. P-P (max.) Line & Load Level (4) PSA12x-120 12V 0A 1.0A 240mV ±5% (1) Dimensions for PSA12A-120 model (2) Measured with an oscilloscope with 20MHz (or over) Bandwidth. Outputs should be bypassed at a connector with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor. (3) Minimum order requirement of 2500 pieces for both US and EU models. (4) X = A for US version, E for EU version Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 7/17/2012 PSA12x Characteristics WWW.PHIHONG.COM Input: Over-Voltage Protection Output voltage shall not exceed 20V AC Input Voltage Rating 100 to 240 V AC Short-Circuit Protection Protected against short circuit. Continuous short circuit AC Input Voltage Range will not produce fire, smoke or excessive heat 90 to 264V AC Environmental: AC Input Frequency 50 to 60Hz Temperature Operation 0 to +40°C Non-operation -40 to +80°C Input Current Humidity 10 to 90% 0.5A (RMS) maximum at 120V AC 0.25A (RMS) maximum at 240V AC Emissions FCC Class B Leakage Current EN55022 Class B 0.25A maximum at 264V AC Immunity Inrush Current EN50082-1: (EN55024) 30A for 120V AC at maximum load EN61000-4-2 Level 4 60A for 230V AC at maximum load EN61000-4-5 Level 3 Input Power Saving Dielectric Withstand (Hi-pot) Test <0.3W maximum at no load Primary to Secondary: 3000V AC for 1 min., 10mA Output: DC Output Connector Efficiency 2.1 x 5.5mm Center Positive Standard 77.76% minimum average efficiency Mating Connector Hold-up Time Kycon KLD-0202-A or equivalent 10mS minim at 120V AC and maximum load Dimension Diagram Unit: mm – PSA12A-120 Dimension Diagram Unit: mm – PSA12E-120