WWW.PHIHONG.COM 60W* Universal Class B EMI Series PSA45 Series One to Four Output 3x5 Power Supplies *60W Rated at 20CFM air flow cooling Features • Industrial • ISA 9001 Quality System • Zero Minimum Loads • Extended Design Life • Surface Mount Controller Applications • Networking • Mini-microcomputers • Peripherals and Terminals Safety Approvals • UL/CUL 60950-1 Mechanical Characteristics • Length: 127mm (5in) • Height: 30.0mm (1.2in) • Width: 76.2mm (3in) • Weight: 270g (9.5oz) Output Specifications (2) Load DC Output Ripple Total Model (1) (3) Voltage P-P Regulation Min. Convection 20cfm Peak 94) PSA45-033 +3.3V 0A 9A 10A 10A 50mV ±2% (4) PSA45-050 +5V 0A 8A 10A 10A 50mV ±2% (4) PSA45-120 +12V 0A 4A 5A 5A 120mV ±2% (4) PSA45-150 +15V 0A 3A 4A 4A 150mV ±2% (4) PSA45-240 +24V 0A 2A 2.5A 2.5A 240mV ±2% +5V(V1) 0A 4A 5A 7A 50mV ±2% PSA4531 +12V(V2) 0A 1.5A 2.5A 4A 120mV ±5% -12V(V3) 0A 0.5A 0.5A 1A 120mV ±5% +5V(V1) 0A 4A 5A 7A 50mV ±2% PSA4534 +15V(V2) 0A 1.2A 2A 3A 150mV ±5% -15V(V3) 0A 0.5A 0.5A 1A 150mV ±5% +5V(V1) 0A 3A 5A 7A 50mV ±2% +12V(V2) 0A 2A 2A 4A 120mV ±5% PSA4541 -12V(V3) 0A 0.5A 0.5A 1A 120mV ±5% -5V(V4) 0A 0.5A 0.5A 1A 50mV ±5% (1) Measured at 45W by using a 12-inch twisted pair, terminated with a 10mfd capacitor and 0.1mfd ceramic in parallel. (2) See Reverse for exact tolerances; may deviate during peak loading conditions (3) Peak output of less than 30 Seconds; total peak power not to exceed 60W. (4) Special order model. Minimum order quantity of 1500 pieces required Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 8/12/2015 WWW.PHIHONG.COM PSA45 Characteristics Input: Environmental: AC Input Voltage Rating Temperature 100 to 240V AC Operation 0 to 50°C Non-operation -25 to +85°C AC Input Voltage Range 90 to 264V AC Humidity Operation 5 to 95% non-condensing AC Input Frequency 47 to 63Hz Emissions FCC Class B Input Current EN55022 Class B 2A (RMS) at maximum load and 120V AC 1A (RMS) at maximum load and 240V AC General: Leakage Current Insulation Resistance 3.5mA maximum 50M ohm minimum Inrush Current Dielectric Withstand (Hi-pot) Test 30A for 120V AC at maximum load Input to Ground: 1500V AC for 1 minute, 10mA 60A for 240V AC at maximum load Switching Frequency (Cold start at ambient 25°C) 50KHz typical Hold-up Time MTBF (Full load and 110V AC, 25°C) 12mX typical at maximum load at 120V AC, 60Hz 100K hours at maximum load Output: AC Mating Connector Efficiency Molex 09-50-3031 68% typical at maximum load and 120V AC DC Output Connector Over-Voltage Protection Molex: 09-50-3061 or 3081(Quad only) Crowbar, V1 only Over-Current Protection Short-Circuit Protection – Auto-Restart Dimension Diagram Unit: mm (inch)