PHIHONG PSM090-240P

WWW.PHIHONG.COM 90W Open Frame LED Driver PSM090-240P Constant Voltage LED Power Supply Features  Low Profile Design  Constant Voltage  OVP, OCP, OTP and Short-Circuit  100 to 277V Input Range Protection  High Efficiency  Power Factor Correction  3 Years Warranty  UL 8750 Compliant Applications  Indoor Lighting Safety Approvals  cUL/UL Mechanical Characteristics  Length: 169mm (6.65in)  Height: 31mm (1.22in)  Width: 61mm (2.4in)  Weight: 368g (13oz) Output Specifications DC Output Voltage Range Output Current Typical Output Max Model Voltage Power Min. Max. Min. Max. PSM090-240P 22.8V 25.2 24V 0.2A 3.75A 90W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 11/28/2011 PSM090-240P Characteristics WWW.PHIHONG.COM INPUT: EMC EN55015 AC Input Voltage Range 90 to 304VAC Immunity EN61000-4-2 AC Input Voltage Rating EN61000-4-3 100 to 277VAC EN61000-4-4 EN61000-4-5 Leakage Current EN61000-4-6 <1mA at 277VAC and maximum load EN61000-4-8 EN61000-4-11 AC Input Frequency EN61000-3-2 47-63Hz Isolation Test (HI-POT) AC Inrush Current Primary to Secondary: 3000VAC, <10mA 40A at 115VAC and maximum load 80A at 277VAC and maximum load Insulation Resistance Primary to Secondary: 500VDC, >10 M ohm OUTPUT: Total Output Power FEATURES: 90W Input Current Protection The input power line will be fused with a 3A/350VAC Efficiency fuse >85% at 115/277VAC and maximum load Overload Protection Power Factor Auto-recover, Hiccup mode >0.95 at 115VAC and maximum load >0.90 at 230VAC and maximum load Overvoltage Protection Output should not exceed 35V, auto shut down Ripple <240mVp-p at maximum load Over Temperature Protection Automatic shut-down and latch off Setup Time 4 seconds minimum at 100/277VAC and max load MTBF 30K Hours minimum at max load and ambient 25°C Hold Up Time 8mS max. at 100/277VAC, 15mS max at 277VAC AC Input Connector (CN 1) DINKLE: EK500V-03P ENVIRONMENTAL: Mating: Solid or Stranded wire 18~24 AWG Operating Temperature -10 to 40°C Storage Temperature -20 to 85°C DC Output Connector (CN2) JST B6P – VH or equivalent Operating Humidity 20 to 90% Storage Humidity 10 to 95% Pin # Assignment 1,2,3 -V Warranty 5 Years 4,5,6 +V PSM090-240P Characteristics WWW.PHIHONG.COM