PLETRONICS TCD4058-26.0M
Specifications
Manufacturer
Pletronics
Manufacturers Part #
TCD4058-26.0M
Sub-Category
Voltage Controlled Oscillators
Factory Pack Quantity
1
Datasheet
Extracted Text
TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Applications Features GPS • Pletronics’ TCD4 Series Temperature Compensated WiMAX, Wi-Fi, Wi-LAN Crystal Oscillator Handsets • Optional Voltage Control Function Broadband Access • Clipped Sine Wave Output Point to point radios Seismic Exploration • 1.8V to 3.3V nominal Supply Voltage Wireless Communications TCD4 • 10 - 40 MHz Frequency Base Stations 3.2 x 5 x 1.5 mm Test Equipment LCC Ceramic Package Electrical Characteristics Parameter Min Typ Max Unit Condition (Consult factory for other options) 2 Frequency Range 10 - 40 MHz Specified by part number 2 Frequency Stability vs. Temperature ±0.5 - ±2.5 ppm Specified by part number (f - f ) / 2 max min Vcontrol 1.50 volts at 25°C ± 2°C when V > 2.5 volts CC Frequency Initial Calibration - - ±2.0 ppm Vcontrol 0.9 volts at 25°C ± 2°C when V < 2.4 volts CC If Vcontrol used 2 Operating Temperature Range -40 - +85 °C Specified by part number, Consult factory for wider range 1, 2 Supply Voltage V 1.8 - 3.3 Volts ± 5%, Specified by part number CC Supply Current I - 2.0 3.0 mA Load: 10 Kohm || 10 pF, V ± 5% CC CC Frequency Stability vs. Supply - - ±0.2 ppm Load: 10 Kohm || 10 pF, V ± 5% CC Frequency Stability vs. Load - - ±0.2 ppm Load: 10 Kohm || 10 pF ± 5% 0.50 1.50 2.50 1.50 volts nominal for V nominal > 2.5 volts CC Vcontrol Range Volts 0.30 0.90 1.50 0.9 volts nominal for V nominal < 2.4 volts CC 2 Frequency Pullability 0 ±8.0 ±12.0 ppm Specified by part number, Positive Slope Output Waveform Clipped Sine Wave DC Coupled Output Level 0.8 - - V p-p Load: 10 Kohm || 10 pF ± 10% Startup Time - - 10.0 mS Within ± 2.0 ppm of final frequency Long Term Stability (Aging) - - ±1.0 ppm Per year at 25°C ± 2°C Phase Noise 100 Hz -110 1 kHz -130 - - dBc/Hz 25°C ± 2°C at 26.0 MHz 10 kHz -145 100 kHz -145 Storage Temperature Range -55 - +95 °C Notes: 1 Place an appropriate power supply bypass capacitor next to device for correct operation 2 Specified by part number Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 1 TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Part Number 1 1, 2 1 V Supply Voltage Operating Temperature Stability Pullability Frequency CC Series Model Lowest Highest Lowest Highest (ppm) (ppm) (MHz) TCD4 031 035 G H 015 008 -19.44M o A = +10 C o A = +40 C o B = +5 C o B = +45 C o C = +0 C o C = +50 C o 005 = ± 0.5 D = -5 C 031 = 3.1 for 3.3 volts nominal 035 = 3.5 for 3.3 volts nominal o D = +55 C o 010 = ± 1.0 000 = TCXO 029 = 2.9 for 3.0 volts nominal 031 = 3.1 for 3.0 volts nominal E = -10 C o o E = +60 C 027 = 2.7 for 2.8 volts nominal 029 = 2.9 for 2.8 volts nominal 015 = ± 1.5 005 = ± 5 10 - 40 MHz F = -15 C o F = +65 C o 024 = 2.4 for 2.5 volts nominal 026 = 2.6 for 2.5 volts nominal G = -20 C o 020 = ± 2.0 008 = ± 8 G = +70 C o 017 = 1.7 for 1.8 volts nominal 019 = 1.9 for 1.8 volts nominal H = -25 C o H = +75 C 025 = ± 2.5 o J = -30 C o J = +80 C o K = -35 C o K = +85 C o L = -40 C 1 Contact Factory for non-standard specifications 2 Not all stabilities are available with all operating temperature ranges. Contact Factory for exact combinations available. Device Marking PLE = Pletronics FFFF . xxx FFFF . xxx FFFF = Frequency in MHz YWW = Date Code (year week) C PLE C PLE xx .YWWx All other marking is internal codes x .YWWx Note: Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Package Labeling Tape and Reel available for quantities of 250 to 1000 per reel, cut tape for < 250. 16mm tape, 8mm pitch. P/N Label is 1" x 2.6" (25.4mm x 66.7mm) RoHs Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Font is Arial Bar code is 39-Full ASCII Pletronics Inc. certifies this device is in accordance with the RoHS 2 (2011/65/EU) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.10 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D Second Level Interconnect code: e4 Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 2 TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Mechanical Dimensions Inches mm 0.197 ± 0.006 5.00 ± 0.15 A B 0.126 ± 0.006 3.20 ± 0.15 C 0.059 max 1.50 max 1 E 0.189 4.80 1 F 0.102 2.60 1 G 0.118 3.00 1 H 0.055 1.40 1 J 0.008R 0.20R 1 Typical dimensions Pad Layout mm shown Disclaimer: Recommended layout shown. Adjust layout as needed for individual process requirements. (Not to Scale) Contacts (pads): Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm) Layout Pad Function Note 1 Vcontrol Input If this function is not specified, recommend connecting this pad to ground. 2 Ground (GND) 3 Output The output is DC coupled. Most commonly used with external coupling capacitor. 0.001 to 0.01µF recommended. V Supply Voltage 4 CC Connect an appropriate power supply bypass capacitor as close as possible For Optimum Jitter Performance, Pletronics recommends: $ A ground plane under the device $ Do not route large transient signals (both current and voltage) under the device $ Do not place near a large magnetic field such as a high frequency switching power supply $ Do not place near piezoelectric buzzers or mechanical fans Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 3 TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Electrical Test / Load Circuit Environmental / ESD Ratings Reliability: Environmental Compliance ESD Rating Parameter Condition Model Min. Voltage Condition Human Body Model 2000V JESD22-A114 Mechanical Shock JESD22-B104 Charged Device Model 500V JESD 22-C101 Vibration JESD22-B103 Machine Model 200V JESD22-A115 Solderability IPC J-STD-002 Thermal Shock MIL-STD-883 Method 1011, Condition A Absolute Maximum Ratings Parameter Unit V Supply Voltage -0.6V to +6V CC Thermal Characteristics: o Vi Input Voltage -0.6V to V + 0.6V CC The maximum die or junction temperature is 155 C o The thermal resistance junction to board is 30 to 50 C/Watt depending Io Output Current -10mA to +10mA on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 4 TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Reflow Cycle The part may be reflowed 2 times without degradation (typical for lead free processing). Tape and Reel Tape Constant Dimensions Table 1 Tape D1 S1 T T1 Do E1 Po P2 Size min min max max 8mm 1.0 2.0 1.5 ±0.05 12mm 1.5 1.75 4.0 0.6 0.6 0.1 +0.1 ±0.1 ±0.1 16mm 1.5 2.0 -0.0 24mm 1.5 ±0.1 Tape Variable Dimensions Table 2 Tape B1 E2 T2 W Ao, Bo F P1 Size max min max max & Ko 8.0 16mm 12.1 14.25 7.5 ±0.1 8.0 16.3 Note 1 ±0.1 Dimensions in mm Drawing Not to scale Note 1: Embossed cavity to conform to EIA– 481-B Reel Dimensions (may vary) Table 3 A B C D Reel Inches mm Inches mm mm mm Size 7 7.0 177.8 2.50 63.5 13.0 Tape size +0.4 10 10.0 254.0 4.00 101.6 +0.5 +2.0 -0.2 -0.0 13 13.0 330.2 3.75 95.3 Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 5 TCD4 Series PLETRONICS TCD4 Series TCXO / TCVCXO TCXO / TCVCXO Important Notice Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics, Inc. Tel: 425.776.1880 19013 36th Ave. West Fax: 425.776.2760 Lynnwood, WA 98036-5761 email: ple-sales@pletronics.com U.S.A. URL: www.pletronics.com Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. June 5, 2015 Rev. D Production processing does not necessarily include testing of all parameters. Copyright © 2015, Pletronics Inc. CCCC 19013 36th Ave. W, Lynnwood, WA 98036 USA CCCC www.pletronics.com CCCC 425-776-1880 Pg 6
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the TCD4058-26.0M?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods