PROTEK PM150 SERIES 150 Watt Open Frame Power Supply 100-150 WATT MEDICAL & ITE POWER SUPPLIES Measures: 2.00 x 4.00 x 1.26” DESCRIPTION PM150 SERIES The PM150 series of AC-DC switching power supplies in a package of 2 x 4 x 1.3 inches are capable of delivering RoHS 100-150 watts of continuous power at 7.5 CFM forced air cooling or 100 watts at convection cooling. The units are constructed on a printed circuit board. They are specially designed for medical applications, but not for life-supporting equipment. The units are certified also to IEC /EN /UL /CSA 60950-1 and suitable for data networking, computer and telecommunication applications. FEATURES  BF Class insulation  Operation up to 5000 meters SAFETY STANDARD APPROVAL  2 x 4 inch footprint with 1.3 inch low profile  100-240 VAC input with active PFC UL ES 60601-1, CSA C22.2 No. 60601-1  Less than 275 μA leakage current File No. E178020  Meet EN55011 /55022 and FCC Class B  Power Factor 0.98 typical  100% burn-in at full load TÜV EN 60601-1  Short -circuit protection  Power Fail Detect (PFD) signal (option)  Compliant with RoHS requirements UL 60950-1, CSA C22.2 No. 60950-1  High Efficiency 89% typical  No load power consumption less than 0.5W without PFD or 1W with PFD TÜV EN 60950-1 GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage: 90-264 VAC Switching frequency: 133 KHz (typical) Input frequency: 47-63 Hz Efficiency: See rating chart. Input current: 1.7 A (rms) for 115 VAC Hold-up time: 10 ms minimum at 120 VAC 0.85 A (rms) for 230 VAC Line regulation: ±0.5% maximum at full load Earth leakage current: 275 μA max. @ 264 VAC, 63 Hz Inrush current: 55 A @ 115 VAC or 110 A @ 230 VAC, at 25℃ cold start Withstand voltage: 4000 VAC from input to output (2 MOPP) OUTPUT SPECIFICATIONS 1500 VAC from input to ground (1 MOPP) Output voltage/current: See rating chart. 1500 VAC from output to ground Total output power: See rating chart. MTBF: 250,000 hours at full load at 25℃ ambient, Ripple and noise: See rating chart. calculated per MIL-HDBK-217F Overvoltage protection: set at 112-140% of its nominal output EMC Performance voltage EN55011/EN55022: Class B conducted, class B radiated Overcurrent protection: Output protected to short circuit conditions FCC: Class B conducted, class B radiated Temperature coefficient: All outputs ±0.04% /℃ maximum VCCI: Class B conducted, class B radiated Transient response: Maximum excursion of 4% or better on all EN61000-3-2: Harmonic distortion, class A and D models, recovering to 1% of final value within 500 us after a 25% step load change EN61000-3-3: Line flicker Fan power: 12 V at 0.5 A maximum (isolated) EN61000-4-2: ESD, ±8 KV air and ±6 KV contact EN61000-4-3: Radiated immunity, 3 V/m EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3 Vrms Operating temperature: 0℃to +70℃ EN61000-4-8: Magnetic field immunity, 3 A/m Storage temperature: -40℃to +85℃ EN61000-4-11: Voltage dip immunity, 30% reduction for 500 Relative humidity: 5% to 95% non-condensing ms, 60% reduction for 100 ms, >95% Derating: Derate from 100% at +50℃linearly to 50% reduction for 10 ms at +70℃, applicable to convection and forced-air cooling conditions 9 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM150-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PM150 SERIES 150 Watt Open Frame Power Supply UNIVERSAL INPUT PM150 MEDICAL & ITE SERIES Measures: 2.00 x 4.00 x 1.26” OUTPUT VOLTAGE/CURRENT RATING CHART Output Efficiency (typical) Max. Power Max. Power Max. Current (1) Max. Current Peak Ripple & at convection at 7.5 CFM at (3) (2) Model V1 Min. load convection at 7.5 CFM Current Tol. Noise Max. Power 115/230 Vac 115/230 Vac PM150-12A 12 V 0 A 8.35 A 12.50 A 14.0 A ±2% 120 mV 100 W /150 W 87 /89% 86 /88% 6.70 A PM150-13A 15 V 0 A 10.00 A 11.0 A ±2% 150 mV 100 W /150 W 87 /89% 86 /88% PM150-13-1A 18 V 0 A 5.56 A 8.34 A 9.2 A ±2% 180 mV 100 W /150 W 87 /89% 86 /88% PM150-14A 24 V 0 A 4.20 A 6.25 A 7.0 A ±2% 240 mV 87 /89% 86 /88% 100 W /150 W 3.34 A PM150-16A 30 V 0 A 5.00 A 5.6 A ±2% 300 mV 100 W /150 W 87 /89% 86 /88% 2.78 A PM150-17A 36 V 0 A 4.17 A 4.6 A ±2% 360 mV 100 W /150 W 87 /89% 86 /88% PM150-18A 48 V 0 A 2.10 A 3.13 A 3.5 A ±2% 480 mV 87 /89% 86 /88% 100 W /150 W NOTES: 1. Peak output current with 10% duty cycle maximum for less than 15 seconds, average power not to exceed maximum power rating. 2. The first value of max. power is at convection cooling. The second value is with 7.5 CFM forced air provided by user. 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1: JST header P/N V3P-VH-B, mating with JST housing P/N VHR-3N or equivalent. 4. Output connector P2: JST header P/N V8P-VH-B, mating with JST housing P/N VHR-8N or equivalent. 5. Connector P3: JST header B4B-PH-K-S (LF) (SN) , mating with JST housing PHR-4 or equivalent. 6. FAN connector P4: JST header B2B-PH-K-S (LF) (SN) , mating with JST housing PHR-2 or equivalent. 7. Ground tab is 0.25 [6.35] × 0.032 [0.8] fast-on connector. Weight: 200 grams (0.44 lbs.) approx. 10 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM150-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PM150 SERIES 150 Watt Open Frame Power Supply UNIVERSAL INPUT PM150 MEDICAL & ITE SERIES Measures: 2.00 x 4.00 x 1.26” INTERFACE SIGNALS OUTPUT POWER DERATING CURVE PFD: TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 is within regulation. PIN CHART Connector P1 P2 PIN NO. 1 2 3 1 2 3 4 5 6 7 8 Polarity Neutral Void Live Common Return +V1 Connector P3 P4 PIN NO. 1 2 3 4 1 2 Fan Return Polarity Common Return PFD -Sense +Sense +12V Fan (Isolated) 11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM150-power-supply.html h t t p: / / pow e r. sa ge r. c om