PROTEK PM201 SERIES 200 Watt Enclosed with Fan Power Supply 150-200 WATT MEDICAL & ITE POWER SUPPLIES Measures: 7.00 x 4.00 x 1.50” PM201 SERIES DESCRIPTION The PM201 series comprising single and multiple output models for 150 to 200 watts of continuous output power is specially 5R+6 designed for medical and ITE applications, not for life-support. They operate at 90 to 264 VAC input voltage without the need of a selector strap. All auxiliary outputs are with magnetic amplifier linear regulator to keep regulation. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing. FEATURES z Low safety ground leakage current z Meet EN55011, EN55022 and FCC Class B SAFETY STANDARD APPROVALS z Power Factor 0.98 typical UL ES 60601-1, CSA C22.2 No. 60601-1 z Short-circuit protection File No. E178020 z Power Fail Detect (PFD) signal UL 60950-1 z 100% burn-in at full rated load File No. E137410 z Optional cover and fan assembly z Remote inhibit - TTL high to disable output TÜV EN60601-1 z Compliant with RoHS requirements TÜV EN60950-1 INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input voltage: 90-264 VAC Operating temperature: 0к to +70к Input frequency: 47-63 Hz Storage temperature: -40к to +85к Input current: 3.20 A (rms) for 115 VAC Relative humidity: 5% to 95% non-condensing 1.60 A (rms) for 230 VAC Derating: Derate from 100% at +50к Earth leakage current: 220ʳȝA max. @ 264 VAC, 63 Hz linearly to 50% at +70к Cooling: 10.8 CFM forced air provided on “C” version; 25 CFM forced air to be provided OUTPUT SPECIFICATIONS for “B” version by user. Output voltage/current: See rating chart. Maximum output power: See rating chart. GENERAL SPECIFICATIONS Ripple and noise: 2% peak to peak maximum on 3.3 V & 5.1 V Switching frequency: 88-112 KHz and 1% peak to peak maximum on other Efficiency: 70% minimum on all models voltage outputs Hold-up time: 20 ms minimum at 110 VAC Overvoltage protection: Provided on output #1 only; set at 112-132% Line regulation: ±0.5% maximum at full load of its nominal output voltage Inrush current: 20 A @ 115 VAC or 40 A @ 230 VAC, at 25к Overcurrent protection: All outputs protected to short circuit cold start conditions Withstand voltage: 5600 VDC from input to output (2 MOPP) Temperature coefficient: All outputs ±0.04% /к maximum 2100 VDC from input to ground (1 MOPP) Transient response: Maximum excursion of 4% or better on all 700 VDC from output to ground models, recovering to 1% of final value (To verify AC strength, get correct test method within 500 us after a 25% step load change to avoid power supply damage.) MTBF: 350,000 hours at full load at 25к ambient, Fan power: 12 V at 200 mA maximum, except 24 V at calculated per MIL-HDBK-217F 200 mA maximum for PM201-25B and EMC Performance (EN60601-1-2) PM201-27B, and 5 V at 380 mA maximum EN55011/EN55022: Class B conducted, class B radiated for PM201-40-3B EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker INTERFACE SIGNALS EN61000-4-2: ESD, ±8 KV air and ±6 KV contact PFD: TTL logic high for normal operation and TTL logic low upon EN61000-4-3: Radiated immunity, 3 V/m loss of input power. This signal appears at least 1ms prior to EN61000-4-4: Fast transient/burst, ±2 KV V1 output dropping 5% below its nominal value. This signal EN61000-4-5: also provides a minimum delay of 100 ms after V1 is within Surge, ±1 KV diff., ±2 KV com. regulation. EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 3 A/m Voltage dip immunity, 30% reduction for Inhibit: Requires an external TTL high level signal to inhibit EN61000-4-11: 500 ms, 60% reduction for 100 ms, and outputs for standard models >95% reduction for 10 ms Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 13 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM201-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PM201 SERIES 200 Watt Enclosed with Fan Power Supply UNIVERSAL INPUT PM201 MEDICAL & ITE SERIES Measures: 7.00 x 4.00 x 1.50” OUTPUT VOLTAGE/CURRENT RATING CHART (4) (2)(4) (3) Output #1 Output #2 Output #3 Output #4 Imax Max. Output (1) (4) Model V1 Imin. Imax. Tol. V2 Imin. Imax. Tol. V3 Imin. Imax. Tol. V4 Imin. . Tol. Power PM201-10B 5.1 V (N/A) (N/A) (N/A) 87.5 W /175 W 3.0 A 35.0 A ̈́2% (N/A) (N/A) (N/A) PM201-10-3B 3.3 V 3.0 A 46.0 A ̈́3% 75 W /150 W PM201-12B 12 V (N/A) (N/A) (N/A) 100 W /200 W 1.2 A 16.7 A ̈́2% (N/A) (N/A) (N/A) PM201-13B 15 V 1.0 A 13.4 A ̈́2% 100 W /200 W PM201-14B 24 V (N/A) (N/A) (N/A) 100 W /200 W 0.6 A 8.4 A ̈́2% PM201-16B 30 V 0.5 A 6.7 A ̈́2% (N/A) (N/A) (N/A) 100 W /200 W (N/A) (N/A) (N/A) PM201-18B 48 V 0.5 A 4.2 A ̈́2% 100 W /200 W PM201-23B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% (N/A) (N/A) 100 W /200 W (N/A) (N/A) PM201-24B +5.1 V 3.0 A 30.0 A ̈́2% +15 V 0 A 6 A ̈́4% 100 W /200 W PM201-25B +5.1 V 3.0 A 30.0 A ̈́2% +24 V 0 A 4 A ̈́4% (N/A) (N/A) 100 W /200 W (N/A) (N/A) PM201-27B +12 V 1.0 A 8.7 A ̈́2% +24 V 0 A 4 A ̈́4% 100 W /200 W PM201-30B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -5 V 0 A 6 A ̈́4% (N/A) 100 W /200 W (N/A) PM201-31B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -12 V 0 A 4 A ̈́4% 100 W /200 W PM201-32B +5.1 V 3.0 A 30.0 A ̈́2% +15 V 0 A 6 A ̈́4% -15 V 0 A 4 A ̈́4% (N/A) 100 W /200 W (N/A) PM201-33B +5.1 V 3.0 A 30.0 A ̈́2% +15 V 0 A 6 A ̈́4% -12 V 0 A 4 A ̈́4% 100 W /200 W PM201-36B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% 24 V 0 A 4 A ̈́4% (N/A) 100 W /200 W PM201-40B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -12 V 0 A 4 A ̈́4% 5 V 0 A 6 A ̈́4% 100 W /200 W PM201-41B +5.1 V 3.0 A 30.0 A ̈́2% +15 V 0 A 6 A ̈́4% -15 V 0 A 4 A ̈́4% 24 V 0 A 4 A ̈́4% 100 W /200 W PM201-42B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -12 V 0 A 4 A ̈́4% 12 V 0 A 4 A ̈́4% 100 W /200 W PM201-44B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -15 V 0 A 4 A ̈́4% 15 V 0 A 4 A ̈́4% 100 W /200 W PM201-45B +5.1 V 3.0 A 30.0 A ̈́2% +12 V 0 A 8 A ̈́4% -12 V 0 A 4 A ̈́4% 24 V 0 A 4 A ̈́4% 100 W /200 W PM201-40-3B +3.3 V 3.0 A 30.0 A ̈́3% +5.1 V 0 A 8 A ̈́4% -12 V 0 A 4 A ̈́4% 12 V 0 A 4 A ̈́4% 87.5 W /175 W NOTES: OUTPUT POWER DERATING CURVE 1. Suffix “B” in model numbers denotes U-bracket form. Change “B” to “C” for enclosed form with cover and fan assembly, e.g. PM201-45C. 2. Peak output current is 12 A on +12 V, 9 A on +15 V and 6 A on +24 V. 3. Output #4 is floating. It can be connected externally for positive or negative output. 4. 200 watts for “C” version with a cover and fan assembly. 100 watts for “B” version without moving air (maximum current of output #1 & #2 derated to 50%), or 200 watts with 25 CFM forced air provided by user. 5. When the remote Sense facility is not used, +Sense must be connected to +V, and -Sense to return, on P2 connector. 6. All models may be operated at no-load. At no-load, output voltage tolerance increases to ̈́10%. 7. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10ʳȝF tantalum capacitor in parallel with a 0.1ʳȝF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS Single Output Models U-bracket Form Enclosed Form 14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM201-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PM201 SERIES 200 Watt Enclosed with Fan Power Supply UNIVERSAL INPUT PM201 MEDICAL & ITE SERIES Measures: 7.00 x 4.00 x 1.50” MECHANICAL SPECIFICATIONS Multiple Output Models U-bracket Form Enclosed Form NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Dinkle DT-35-B01W-03. Output connector P2 is Dinkle DT-35-B01W-09. Screws are M3, nickel plated. 4. Connector P3 mates with Molex housing 22-01-1043 and Molex 40445 series crimp terminal. 5. Connectors P4 and P5 mate with Molex housing 22-01-1023 and Molex 40445 series crimp terminal. 6. P4 is for DC fan, 12 V/0.2 A rated, Pin 1 +V and Pin 2 -V; except 24 V/0.2 A rated for models PM201-25 and PM201-27, and 5 V/0.38 A rated for models PM201-40-3). 7. Weight: 820 grams (1.8 lbs.) approx. for U-bracket form, 960 grams (2.1 lbs.) approx. for enclosed form. 8. Maximum penetration depth of fixing screws is 4 mm from the outer surface of chassis. PIN CHART CONN P2 P3 P5 PIN 1 2 3 4 5 6 7 8 9 1 2 3 4 1 2 MODEL PM201-10B PM201-14B PM201-10-3B PM201-16B Com. Com. Com. Com. Fan Com. Com. Inhibit Inhibit -Sense +V1 +V1 +V1 +Sense PFD Ret. Ret. Ret. PM201-12B PM201-18B Ret. +V Ret. Ret. +V -V PM201-13B PM201-23B PM201-25B Com. Com. Com. Fan Com. Com. Inhibit Inhibit V1 V1 V2 N.C. N.C. N.C. PFD Ret. Ret. Ret. +V Ret. Ret. +V -V PM201-24B PM201-27B PM201-30B PM201-32B Fan Com. Com. Inhibit Inhibit Com. Com. Com. V1 V1 V2 V3 N.C. N.C. PFD Ret. Ret. Ret. PM201-31B PM201-33B +V Ret. Ret. +V -V PM201-36B Com. Com. Com. V3 Fan Com. Com. Inhibit Inhibit V1 V1 V2 N.C. +V3 PFD Ret. Ret. Ret. Return +V Ret. Ret. +V -V PM201-40B PM201-44B Com. Com. Com. V4 Fan Com. Com. Inhibit Inhibit PM201-41B PM201-45B V1 V1 V2 V3 +V4 PFD Ret. Ret. Ret. Return +V Ret. Ret. +V -V PM201-42B PM201-40-3B Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 15 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM201-power-supply.html h t t p: / / pow e r. sa ge r. c om