PROTEK PM42 SERIES 45 Watt Open Frame Power Supply 30-48 WATT MEDICAL & ITE POWER SUPPLIES Measures: 2.00 x 4.00 x 1.18”” DESCRIPTION PM42 SERIES The PM42 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 30-48 RoHS watts of continuous output power at convection cooling. They operate at 90-264 VAC input voltage without the need of voltage selection, and are suited for medical, information technology and industrial applications. Approval to both EN60601-1 and EN60950-1 Safety Standards improves design-in time and reduces end equipment compliance costs. FEATURES z Medical and ITE approvals z Compact size 2” x4” x1.18” SAFETY STANDARD APPROVALS z Approved for Class I and Class II applications UL ES 60601-1, CSA C22.2 No. 60601-1 z Single, dual and triple outputs File No. E178020 z Wide-range input 90-264 z Low earth leakage current z Level B emissions TÜV EN 60601-1 z RoHS compliant UL 60950-1, CSA-C22.2 No. 60950-1 INPUT SPECIFICATIONS Input voltage: 90-264 VAC TÜV EN 60950-1 Input frequency: 47-63 Hz Input current: 0.9 A (rms) for 100 VAC GENERAL SPECIFICATIONS 0.5 A (rms) for 240 VAC Earth Leakage current: 150 μA max. @ 264 VAC, 63 Hz Switching frequency: 62 K±5 KHz Efficiency: 80-88% typical except PM42-31-3A and PM42-31-5A at 75% typical Hold-up time: 12 ms minimum at 110 VAC OUTPUT SPECIFICATIONS Line regulation: ±0.5% maximum at full load Output voltage/current: See rating chart. Inrush current: 25 A @ 115 VAC, or 50 A @ 230 VAC, at Maximum output power: See rating chart. 25℃ cold start 100 mV peak to peak on 3.3 V & 5.0 V Ripple and noise: Withstand voltage: 5600 VDC from input to output (2 MOPP) models, 1% peak to peak on other models 2100 VDC from input to ground (1 MOPP) Overvoltage protection: Provided on output #1 only; set at 700 VDC from output to ground 112–132% of its nominal output voltage (To verify AC strength, get correct test Overcurrent protection: All outputs protected to short circuit method to avoid power supply damage.) conditions MTBF: 400,000 hours at full load at 25℃ ambient, Temperature coefficient: All outputs ±0.04% /℃ maximum calculated per MIL-HDBK-217F Transient response: Maximum excursion of 4% or better on all EMC Performance models, recovering to 1% of final value EN55011/EN55022: Class B conducted, class B radiated within 500 us after a 25% step load FCC: Class B conducted, class B radiated change VCCI: Class B conducted, class B radiated EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8 KV air and ±6 KV contact ENVIRONMENTAL SPECIFICATIONS EN61000-4-3: Radiated immunity, 3 V/m Operating temperature: -10℃ to +70℃ EN61000-4-4: Fast transient/burst, ±2 KV Storage temperature: -40℃ to +85℃ EN61000-4-5: Surge, ±1 KV diff., ±2 KV com Relative humidity: 5% to 95% non-condensing EN61000-4-6: Conducted immunity, 3 Vrms Derating: Derate from 100% to +50℃ linearly to EN61000-4-8: Magnetic field immunity, 3 A/m 50% at +70℃ EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms and >95% reduction for 10 ms Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM42-power-supply.html h t t p: / / pow e r. sa ge r. c om 1 PROTEK PM42 SERIES 45 Watt Open Frame Power Supply UNIVERSAL INPUT PM42 MEDICAL & ITE SERIES Measures: 2.00 x 4.00 x 1.18”” OUTPUT VOLTAGE/CURRENT RATING CHART Output #1 Output #2 Output #3 Max. Min. Max. Min. Max. Min. Max. Output (1) Model V1 Current Current Tol. V2 CurrentCurrent Tol. V3 Current Current Tol. Power PM42-10A 5 V 0 A 8.0 A ±2% (N/A) (N/A) 40 W PM42-12A 12 V 0 A 3.5 A ±2% (N/A) (N/A) 42 W PM42-13A 15 V 0 A 3.0 A ±2% (N/A) (N/A) 45 W PM42-14A 24 V 0 A 2.0 A ±2% (N/A) (N/A) 48 W PM42-18A 48 V 0 A 1.0 A ±2% (N/A) (N/A) 48 W PM42-23A +5 V 0.5 A 6.0 A ±3% +12 V 0.1 A 2.0 A ±5% (N/A) 40 W PM42-25A +5 V 0.5 A 6.0 A ±3% +24 V 0.1 A 1.0 A ±5% (N/A) 40 W PM42-31A +5 V 0.5 A 6.0 A ±3% +12 V 0.1 A 2.0 A ±5% -12 V 0 A 0.3 A ±4% 40 W PM42-31-3A +3.3 V 0.8 A 6.0 A ±3% +5 V 0.1 A 2.0 A ±5% +12 V 0 A 0.3 A ±4% 30 W PM42-31-5A +5 V 0.5 A 6.0 A ±3% +3.3 V 0 A 1.5 A ±5% +12 V 0 A 0.3 A ±4% 30 W PM42-32A +5 V 0.5 A 6.0 A ±3% +15 V 0.1 A 1.5 A ±5% -15 V 0 A 0.3 A ±4% 40 W PM42-39A +5 V 0.5 A 6.0 A ±3% +24 V 0.1 A 1.0 A ±5% -12 V 0 A 0.3 A ±4% 40 W NOTE: 1. Safety approvals are for PCB form only. To order unit with cover fitted, change suffix “A” to “C”. 2. The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Connector CN1: Molex header 09-65-2038 or equivalent, mating with Molex housing 09-50-1031 or equivalent. 4. Connector CN2: Molex header 09-65-2068 or equivalent, mating with Molex housing 09-50-1061 or equivalent. 5. Ground tab is 0.25 [6.35] x 0.032 [0.8] 6. To ensure compliance with level B emissions, connect the two “＊” marked mounting holes with metallic standoffs to chassis. 7. Weight: 205 grams (0.45 lbs.) approx. PIN CHART PIN 1 2 3 4 5 6 MODEL PM42-10A PM42-13A PM42-18A +V1 V1 Return N.C. PM42-12A PM42-14A PM42-23A PM42-25A V1 Common Return N.C V2 PM42-31A PM42-32A PM42-39A V1 Common Return V3 V2 PM42-31-3A PM42-31-5A Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and par 2 t number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM42-power-supply.html h t t p: / / pow e r. sa ge r. c om