PROTEK PM60 SERIES 60 Watt Open Frame Power Supply 37.5-64 WATT MEDICAL & ITE POWER SUPPLIES Measures: 2.00 x 4.00 x 1.18”” DESCRIPTION PM60 SERIES The PM60 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 37.5-64 RoHS watts of continuous output power at convection cooling. They operate at 90-264 VAC input voltage without the need of voltage selection, and are suited for medical, information technology and industrial applications. Approval to both EN60601-1 and EN60950-1 safety standards improves design-in time and reduces end equipment compliance costs. FEATU RES z Medical and ITE approvals z Compact size 2” x 4” x 1.18” SAFETY STANDARD APPROVALS z Approved for Class I and Class II applic ations UL ES 60601-1, CSA C22.2 No. 60601-1 z Single, dual and triple outputs File No. E178020 z Wide-range input 90-264 VAC z Low earth leakage current z Level B emissions TÜV EN 60601-1 z RoHS compliant UL 60950-1, CSA C22.2 No. 60950-1 INPUT SPECIFICATIONS (except PM60-31-3A by UL) Input voltage: 90-264 VAC Input frequency: 47-63 Hz TÜV EN 60950-1 Input current: 1.3 A (rms) for 100 VAC 0.7 A (rms) for 240 VAC Earth leakage current: 150 μA max. @ 264 VAC, 63 Hz GENERAL SPECIFICATIONS Switching frequency: 62 K ±5 KHz Efficiency: 80-88% typical except PM60-31-3A and PM60-31-5 A at 75% typical OUTPUT SPECIFICATIONS Hold-up time: 12 ms minimum at 110 VAC Output voltage/current: See rating chart. Line regulation: ±0.5% maximum at full load Maximum output power: See rating chart. Inrush current: 30 A @ 115 VAC, or 60 A @ 230 VAC, at 25℃ 100 mV peak to peak on 3.3 V & 5.0 V cold start Ripple and noise: models, 1% peak to peak on other models Withstand voltage: 5600 VDC from input to output (2 MOPP) Overvoltage protection: Provided on output #1 only; set at 2100 VDC from input to ground (1 MOPP) 112-132% of its nominal output voltage 700 VDC from output to ground Overcurrent protection: All outputs protected to short circuit (To verify AC strength, get correct test conditions method to avoid power supply damage.) Temperature coefficient: All outputs ±0.04% /℃ maximum MTBF: 400,000 hours at full load at 25℃ ambient, Transient response: Maximum excursion of 4% or better on all calculated per MIL-HDBK-217F models, recovering to 1% of final value EMC Performance within 500 us after a 25% step load change EN55011 /EN55022: Class B conducted, class B radiated FCC: Class B conducted, class B radiated VCCI: Class B conducted, class B radiated EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker ENVIRONMENTAL SPECIFICATIONS EN61000-4-2: ESD, ±8 KV air and ±6 KV contact Operating temperature: -10℃ to +70℃ EN61000-4-3: Radiated immunity, 3 V/m Storage temperature: -40℃ to +85℃ EN61000-4-4: Fast transient/burst, ±2 KV Relative humidity: 5% to 95% non-condensing EN61000-4-5: Surge, ±1 KV diff., ±2 KV com Derating: Derate from 100% at +50℃ linearly to EN61000-4-6: Conducted immunity, 3 Vrms 50% at +70℃ EN61000-4-8: Magnetic field immunity, 3 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms, >95% reduction for 10 ms Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM60-power-supply.html 3 h t t p: / / pow e r. sa ge r. c om PROTEK PM60 SERIES 60 Watt Open Frame Power Supply Measures: 2.00 x 4.00 x 1.18”” UNIVERSAL INPUT PM60 MEDICAL & ITE SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Output #1 Output #2 Output #3 Min. Max. Current Max. Current Min. Max. Min. Max. Max. Output (1) (2) Model V1 Current at convection at 5 CFM Tol. V2 Current Current Tol. V3 Current Current Tol. Power PM60-10A 5 V 0 A 11.0 A (N/A) ±2% (N/A) (N/A) 55 W PM60-12A 12 V 0 A 5.0 A (N/A) ±2% (N/A) (N/A) 60 W PM60-13A 15 V 0 A 4.3 A (N/A) ±2% (N/A) (N/A) 64 W PM60-14A 24 V 0 A 2.7 A (N/A) ±2% (N/A) (N/A) 64 W PM60-18A 48 V 0 A 1.35 A (N/A) ±2% (N/A) (N/A) 64 W PM60-23A +5 V 0.5 A 6.0 A 8 A ±3% +12 V 0.1 A 3.0 A ±5% (N/A) 55 W PM60-25A +5 V 0.5 A 6.0 A 8 A ±3% +24 V 0.1 A 1.5 A ±5% (N/A) 55 W PM60-31A +5 V 0.5 A 6.0 A 8 A ±3% +12 V 0.1 A 3.0 A ±5% -12 V 0 A 0.5 A ±4% 55 W PM60-31-3A +3.3 V 0.8 A 6.0 A 8 A ±3% +5.2 V 0.1 A 3.0 A ±5% +12 V 0 A 0.5 A ±4% 37.5 W (3) PM60-31-5A +5 V 0.5 A 6.0 A 8 A ±3% +3.3 V 0 A 1.5 A ±5% +12 V 0 A 0.5 A ±4% 37.5 W PM60-32A +5 V 0.5 A 6.0 A 8 A ±3% +15 V 0.1 A 2.4 A ±5% -15 V 0 A 0.5 A ±4% 55 W PM60-39A +5 V 0.5 A 6.0 A 8 A ±3% +24 V 0.1 A 1.5 A ±5% -12 V 0 A 0.5 A ±4% 55 W NOTES: 1. Safety approvals are for PCB form only. To order unit with cover fitted, change suffix “A” to “C”. 2. Maximum current of output #1 of multi-output models can be 8 A at 5 CFM forced air provided by user. 3. It is rated at 37.5 W maximum at convection cooling or 47.5 W maximum at 5 CFM forced air cooling by user. 4. The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. 5. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Connector CN1: Molex header 09-65-2038 or equivalent, mating with Molex housing 09-50-1031 or equivalent. 4. Connector CN2: Molex header 09-65-2068 or equivalent, mating with Molex housing 09-50-1061 or equivalent. 5. Ground tab is 0.25 [6.35] x 0.032 [0.8] fast-on connector. 6. To ensure compliance with level B emissions, connect the two “＊“ marked mounting holes with metallic standoffs to chassis. 7. Weight: 205 grams (0.45 lbs.) approx. PIN CHART PIN 1 2 3 4 5 6 MODEL PM60-10A PM60-12A PM60-13A +V1 +V1 V1 Return V1 Return N.C. N.C. PM60-14A PM60-18A PM60-23A PM60-25A V1 V1 Common Return N.C. V2 PM60-31A PM60-32A PM60-39A V1 V1 Common Return V3 V2 PM60-31-3A PM60-31-5A V1 V1 Common Return V3 V2 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PM60-power-supply.html h t t p: / / pow e r. sa ge r. c om