PROTEK PMP135 SERIES 135 Watt External Power Supply 120-135 WATT MEDICAL & ITE POWER SUPPLIES Measures: 6.73 x 2.83 x 1.65” PMP135 SERIES DESCRIPTION The PMP135 series of AC/DC switching power supplies are for 120-135 watts of continuous output power. They are enclosed in a RoHS 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC class B emission limits, and are designed for medical and ITE applications, not for life-supporting equipment. FEATURES z Low safety ground leakage current SAFETY STANDARD APPROVALS z Class I models are to be certified to medical UL ES 60601-1, CSA C22.2 No. 60601-1 and ITE safety standards, Class II models to File No. E178020 medical standards only. z Wide input range 90 to 264 VAC z Power factor corrected TÜV EN 60601-1 z 200% peak power capability on models below 26 Vdc output UL 60950-1, CSA C22.2 No. 60950-1 z Optional output connectors (except class II models) z Overvoltage protection z Overcurrent protection TÜV EN 60950-1 z Compliant with CEC and Energy Star Efficiency (except class II models) level V requirements * No load power consumption less than 0.5 W GENERAL SPECIFICATIONS * Average active efficiency greater than 87% Switching frequency: 90-160 KHz z Compliant with RoHS requirements Power factor: 0.98 Typical at 115 VAC Efficiency: 87% min. at full load INPUT SPECIFICATIONS Hold-up time: 15 ms minimum at 110 VAC Input voltage: 90-264 VAC Line regulation: ±0.5% maximum at full load Inrush current: 80 A @ 115 VAC or 160 A @ 230 VAC, at Input frequency: 47-63 Hz Input current: 1.60 A (rms) for 115 VAC 25℃ cold start 0.80 A (rms) for 230 VAC Withstand voltage: 5600 VDC from input to output (2 MOPP) 2100 VDC from input to ground (1 MOPP) Earth leakage current: 200 μA max. @ 264 VAC, 63 Hz 700 VDC from output to ground Touch current: 100 μA max. @ 264 VAC, 63 Hz (To verify AC strength, get correct test method to avoid power supply damage.) For Class II models, 4000 VAC from input to output OUTPUT SPECIFICATIONS MTBF: 150,000 hours at full load at 25℃ ambient , Output voltage /current: See rating chart. calculated per MIL-HDBK-217F Maximum output power: See rating chart. Ripple and noise: 1% peak to peak maximum at the full EMC Performance (IEC60601-1-2) load EN55011 /EN55022: Class B conducted, class B radiated Overvoltage protection: Provided and set at 115-140% of its FCC: Class B conducted, class B radiated nominal output voltage VCCI: Class B conducted, class B radiated Overcurrent protection: Protected to short circuit conditions EN61000-3-2: Harmonic distortion, class A and D Temperature coefficient: ±0.04% /℃ maximum EN61000-3-3: Line flicker Transient response: Maximum excursion of 4% or better on EN61000-4-2: ESD, ±8 KV air and ±6 KV contact all models, recovering to 1% of final EN61000-4-3: Radiated immunity, 3 V/m value within 500 us after a 25% step load change EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3 Vrms Operating temperature: 0℃ to +60℃ EN61000-4-8: Magnetic field immunity, 3 A/m Storage temperature: -40℃ to +85℃ EN61000-4-11: Voltage dip immunity, 30% reduction for 500 Relative humidity: 5% to 95% non-condensing ms, 60% reduction for 100 ms and >95% Derating: Derate from 100% at +40℃ linearly to reduction for 10 ms 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 59 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP135-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PMP135 SERIES 135 Watt External Power Supply UNIVERSAL INPUT PMP135 MEDICAL & ITE SERIES Measures: 6.73 x 2.83 x 1.65” OUTPUT VOLTAGE/CURRENT RATING CHART (1) Model Output Average Active Minimum Maximum Peak Ripple & Efficiency (typical) (2) (3) @ 115 / 230 Vac Class I Class II V1 Current Current current Tol. Noise Max. Power PMP135-12 PMP135F-12 12 V 0 A 10.00 A 20.0 A ±5% 120 mV 120 W 87 /89% PMP135-12-1 PMP135F-12-1 13 V 0 A 9.23 A 18.5 A ±5% 130 mV 120 W 87 /89% 14 V-16 V 0 A 9.29 A 18.6 A ±5% 150 mV 130 W 87 /89% PMP135-13 PMP135F-13 PMP135-13-1 PMP135F-13-1 18 V-19 V 0 A 7.50 A 15.0 A ±5% 180 mV 135 W 87 /89% 20 V-21 V 0 A 6.75 A 13.5 A ±5% 200 mV 135 W 87 /89% PMP135-13-3 PMP135F-13-3 PMP135-14 PMP135F-14 24 V-25 V 0 A 5.63 A 11.3 A ±5% 240 mV 135 W 88 /90% 28 V-29 V 0 A 4.83 A 5.8 A ±5% 280 mV 135 W 88 /90% PMP135-15 PMP135F-15 30 V-32 V 0 A 4.50 A 5.4 A ±5% 300 mV 135 W 89 /90% PMP135-16 PMP135F-16 36 V-38 V 0 A 3.75 A 4.5 A ±5% 360 mV 135 W 89 /91% PMP135-17 PMP135F-17 46 V-50 V 0 A 2.94 A 3.5 A ±5% 135 W PMP135-18 PMP135F-18 480 mV 90 /91% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C18 inlet. 2. For 10 seconds maximum, average power not to exceed maximum power rating. 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE Shell connected to Earth Ground for PMP135-XX NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 681 grams (1.505 lbs.) approx. 4. Refer to Section titled “OPTIONAL OUTPUT CONNECTORS”. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP135-14-B1, for ordering. 5. The length of output cable for PMP135-12, PMP135-12-1, PMP135-13, PMP135F-12, PMP135F-12-1, and PMP135F-13 is 37.4 (950) PIN CHART PIN 1 2 3 4 MODEL PMP135-12 PMP135F-12 PMP135-12-1 PMP135F-12-1 PMP135-13 PMP135F-13 PMP135-13-1 PMP135F-13-1 PMP135-13-3 PMP135F-13-3 V1 Return +V1 V1 Return +V1 PMP135-14 PMP135F-14 PMP135-15 PMP135F-15 PMP135-16 PMP135F-16 PMP135-17 PMP135F-17 PMP135-18 PMP135F-18 60 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP135-power-supply.html h t t p: / / pow e r. sa ge r. c om