PROTEK PMP150 SERIES 150 Watt External Power Supply 132-150 WATT MEDICAL & ITE POWER SUPPLIES Measures: 8.17 x 3.00 x 1.57” DESCRIPTION PMP150 SERIES The PMP150 series of AC/DC switching power supplies are for 132-150 watts of continuous output power. They are enclosed in RoHS a 94 V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC / class B emission limits, and are designed for medical and ITE applications, not for life-supporting equipment. FEATURES SAFETY STANDARD APPROVALS z Low safety ground leakage current UL ES 60601-1, CSA C22.2 No. 60601-1 z Both Class I and Class II models are certified to File No. E178020 medical and ITE safety standards. z Wide input range 90 to 264 VAC TÜV EN 60601-1 z Optional output connectors z 100% burn-in UL 60950-1, CSA C22.2 No. 60950-1 z Overvoltage protection File No. E137410 z Overcurrent protection z Compliant with CEC and Energy Star Efficiency TÜV EN 60950-1 level V requirements (except PMP150-12 and PMP150-13 to level IV) * No load power consumption less than 0.5 W * Average active efficiency ≧ 87% GENERAL SPECIFICATIONS z Compliant with RoHS requirements Switching frequency: 30-110 KHz Power factor: 0.98 Typical at 115 VAC Efficiency: Average active 87% min. (except 85% min. for INPUT SPECIFICATIONS PMP150-12 and PMP150-13) Hold-up time: 15 ms minimum at 110 VAC Input voltage: 90-264 VAC Line regulation: ±0.5% maximum at full load Input frequency: 47-63 Hz Inrush current: 60 A @ 115 VAC or 120 A @ 230 VAC, at 25℃ Input current: 2.0 A (rms) for 115 VAC cold start 1.0 A (rms) for 230 VAC Withstand voltage: 5600 VDC from input to output (2 MOPP) Earth leakage current: 220 μA max. @ 264 VAC, 63 Hz 2100 VDC from input to ground (1 MOPP) Touch current: 100 μA max. @ 264 VAC, 63 Hz 700 VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.) For Class II models, 4000 VAC from input to OUTPUT SPECIFICATIONS output Output voltage /current: See rating chart. MTBF: 150,000 hours at full load at 25℃ ambient , Maximum output power: See rating chart. calculated per MIL-HDBK-217F Ripple and noise: 1% peak to peak maximum at full load Overvoltage protection: Provided and set at 112-140% of its EMC Performance (IEC60601-1-2) nominal output voltage EN55011 /EN55022: Class B conducted, class B radiated Overcurrent protection: Protected to short circuit conditions FCC: Class B conducted, class B radiated Temperature coefficient: ±0.04 %/℃ maximum VCCI: Class B conducted, class B radiated EN61000-3-2: Harmonic distortion, class A and D Transient response: Maximum excursion of 4% or better on EN61000-3-3: Line flicker all models, recovering to 1% of final EN61000-4-2: ESD, ±8 KV air and ±6 KV contact value within 500 us after a 25% step EN61000-4-3: Radiated immunity, 3 V/m load change EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 3 A/m ENVIRONMENTAL SPECIFICATIONS EN61000-4-11: Voltage dip immunity, 30% reduction for 500 Operating temperature: 0℃℃ to +60 ms, 60% reduction for 100 ms and >95% Storage temperature: -40℃℃ to +85 reduction for 10 ms Relative humidity: 5% to 95% non-condensing Derating: Derate from 100% at +40℃ linearly to 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 61 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP150-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PMP150 SERIES 150 Watt External Power Supply UNIVERSAL INPUT PMP150 MEDICAL & ITE SERIES Measures: 8.17 x 3.00 x 1.57” OUTPUT VOLTAGE/CURRENT RATING CHART (1) Model Output Average Active Ripple & Efficiency (typical) (2) Class I Class II V1 Min. Current Max. Current Tol. Noise Max. Power @ 115 / 230 Vac PMP150-12 PMP150F-12 12.0 V 0 A 11.00 A ±5% 120 mV 132 W 87 /86% PMP150-13 PMP150F-13 15.0 V 0 A 9.00 A ±5% 150 mV 87 /86% 135 W PMP150-13-2 PMP150F-13-2 19.0 V 0 A 7.90 A ±5% 190 mV 88 /88% 150 W PMP150-14 PMP150F-14 24.0 V 0 A 6.25 A ±5% 240 mV 150 W 88 /88% PMP150-15 PMP150F-15 27.0 V 0 A 5.56 A ±5% 270 mV 89 /88% 150 W PMP150-18 PMP150F-18 48.0 V 0 A 3.13 A ±5% 480 mV 150 W 88 /88% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C18 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE Shell connected to Earth Ground for PMP120-XX NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 960 grams (2.1 lbs.) approx. 4. Output connector is 4 pin plug without lock, mating with Kycon P/N KPJX-4S-S socket or equivalent. 5. Refer to Section titled “OPTIONAL OUTPUT CONNECTORS”. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP150-14-B1, for ordering. PIN CHART PIN 1 2 3 4 MODEL PMP150-12 PMP150F-12 PMP150-13 PMP150F-13 PMP150-13-2 PMP150F-13-2 V1 Return +V1 V1 Return +V1 PMP150-14 PMP150F-14 PMP150-15 PMP150F-15 PMP150-18 PMP150F-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 62 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP150-power-supply.html h t t p: / / pow e r. sa ge r. c om