PROTEK PMP15 SERIES 15 WATT MEDICAL POWER SUPPLIES 15 Watt External Power Supply Measures: 3.08 x 2.04 x 1.36” DESCRIPTION PMP15 SERIES The PMP15 series of AC/DC wall mount switching power supplies are for 15 watts of continuous output power. They are RoHS enclosed in a 94V-1 rated polyphenylene-oxide case with four types of interchangeable AC plugs: European plug, UK plug and North American plugs. All models meet EN55011 and FCC class B emission limits, and are designed for medical application, not for life-supporting equipment. FEATURES z Interchangeable AC plugs z High efficiency SAFETY STANDARD APPROVALS z Low ripple & noise z Overvoltage protection UL ES 60601-1, CSA C22.2 No. 60601-1 z Short-circuit protection File No. E 211696 z 100% burn-in at full rated load z Standby consumption less than 0.3 W z Compliant with CEC and ENERGY STAR efficiency TÜV EN 60601-1 level V requirements z Compliant with RoHS requirements INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input voltage: 90-264 VAC 8 ms minimum at 115 VAC Hold-up time: Input frequency: 47-63 Hz 3 s maximum at 115 VAC Turn on delay time: Input current: 0.5 A (rms) for 115 VAC Efficiency: Compliant with Energy Star efficiency 0.3 A (rms) for 230 VAC level V requirements (see rating chart) Enclosure leakage current: 100 μA max. @ 264 VAC, 63 Hz Line regulation: ±0.5% maximum at full load Inrush current: 30 A @ 115 VAC or 60 A @ 230 VAC (80 A for PMP15M/D/E-10) at 25℃ cold start Withstand voltage: 4000 VAC from input to output (2 MOPP) OUTPUT SPECIFICATIONS MTBF: 300,000 hours at full load at 25℃ Output voltage /current: See rating chart. ambient, calculated per MIL-HDBK-217F Maximum output power: See rating chart. EMC Performance (IEC60601-1-2) Ripple and noise: 1% peak to peak maximum(except 100 EN55011: Class B conducted, Class B radiated mVp-p max. for lower than output 10 V) FCC: Class B conducted, Class B radiated Overvoltage protection: Set at 116% to 230% of its nominal VCCI: Class B conducted, Class B radiated output voltage EN61000-3-2: Harmonic distortion, Class A and D Overcurrent protection: Protected to short circuit conditions EN61000-3-3: Line flicker Temperature coefficient: ±0.04% /℃ maximum EN61000-4-2: ESD, ±8 KV air and ±6 KV contact Transient response: Maximum excursion of 4% or better on EN61000-4-3: Radiated immunity, 3 V/m all models, recovering to 1% of final EN61000-4-4: Fast transient/burst, ±2 KV value within 500 us after a 25% step EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. load change EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 3 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ENVIRONMENTAL SPECIFICATIONS ms, 60% reduction for 100 ms, and ＞95% Operating temperature: 0℃℃ to +40 reduction for 10 ms Storage temperature: -40℃ to +85℃ Relative humidity: 10% to 90% non-condensing Derating: Derate from 100% at +40℃ linearly to 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP15-power-supply.html h t t p: / / pow e r. sa ge r. c om 41 PROTEK PMP15 SERIES 15 Watt External Power Supply Measures: 3.08 x 2.04 x 1.36” UNIVERSAL INPUT PMP15 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Output Average Active Ripple & Max. Output Efficiency (typical) (1) (2) Model V1 Min. Current Max. Current Tol. Noise Power @ 115 / 230 Vac PMP15M-10 5 V 0 A 3.0 A ±5% 100 mV 15 W 78 /77% ±5% PMP15M-10-1 6 V 0 A 2.5 A 100 mV 15 W 80 /78% ±5% PMP15M-11 9 V 0 A 1.67 A 100 mV 15 W 82 /80% ±5% PMP15M-12 12 V 0 A 1.25 A 120 mV 15 W 82 /80% ±5% PMP15M-13 15 V 15 W 83 /80% 0 A 1.0 A 150 mV ±5% PMP15M-14 24 V 0 A 0.625 A 240 mV 15 W 85 /81% ±5% PMP15D-10 5 V 0 A 3.0 A 100 mV 15 W 78 /77% ±5% PMP15D-11 9 V 0 A 1.67 A 100 mV 15 W 82 /80% ±5% PMP15D-12 12 V 0 A 1.25 A 120 mV 15 W 82 /80% ±5% PMP15D-14 24 V 0 A 0.625 A 240 mV 15 W 85 /81% ±5% PMP15NP-10 5 V 0 A 3.0 A 100 mV 15 W 78 /77% ±5% PMP15NP-11 9 V 0 A 1.67 A 100 mV 15 W 82 /80% ±5% PMP15NP-12 12 V 0 A 1.25 A 120 mV 15 W 82 /80% ±5% PMP15NP-14 24 V 0 A 0.625 A 240 mV 15 W 85 /81% ±5% PMP15E-10 5 V 0 A 3.0 A 100 mV 15 W 78 /77% PMP15E-12 12 V ±5% 15 W 82 /80% 0 A 1.25 A 120 mV ±5% PMP15E-14 24 V 0 A 0.625 A 240 mV 15 W 85 /81% NOTES: 1. PMP15M models are for interchangeable AC plugs which are to be ordered separately. PMP15D and PMP15NP models are with fixed North American AC plug for safety approval cULus only, and PMP15E models with fixed European AC plug for safety approval TÜV only. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS 1. PMP15M models (Interchangeable AC Plug) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP15-power-supply.html h t t p: / / pow e r. sa ge r. c om 42 PROTEK PMP15 SERIES 15 Watt External Power Supply UNIVERSAL INPUT PMP15 MEDICAL SERIES Measures: 3.08 x 2.04 x 1.36” 2. PMP15D models (Fixed North American AC Plug, Polarization) 3. PMP15NP models (Fixed North American AC Plug, Non-Polarization) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP15-power-supply.html h t t p: / / pow e r. sa ge r. c om 43 PROTEK PMP15 SERIES 15 Watt External Power Supply UNIVERSAL INPUT PMP15 MEDICAL SERIES Measures: 3.08 x 2.04 x 1.36” 4. PMP15E models (Non-replaceable AC Plug) NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 200 grams (0.44 lbs.) approx. 4. Output cable is 1600 mm 20 AWG except 1000 mm 16 AWG for 5 V and 6 V output models, and 1200 mm 18 AWG for 9 V output model, so as to comply with CEC and Energy Star efficiency level V requirements. 5. Output connector is 5.5 mm O.D., 2.5 mm I.D., 10 mm long barrel female connector, center positive voltage. 6. AC inlet plug Type European plug UK plug North American Order no. 4AP00043 4AP00049 4AP00045 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP15-power-supply.html h t t p: / / pow e r. sa ge r. c om 44