PROTEK PMP180 SERIES 180 Watt External Power Supply 180 WATT MEDICAL POWER SUPPLIES Measures: 7.76 x 3.46 x 1.73” PMP180 SERIES DESCRIPTION The PMP180 /PMP180SF series of AC/DC switching power supplies are for 180 watts of continuous output power. They RoHS are enclosed in a 94V-1 rated polyphenylene-oxide case with an inlet of the IEC320/C14 or IEC320/C8 to mate with interchangeable cord for world-wide use. All models meet EN 55011 and FCC class B emission limits, and are designed for medical applications not for life-supporting equipment. FEATURES z High efficiency z Low ripple & noise z Overvoltage protection z Short-circuit protection SAFETY STANDARD APPROVALS z Overpower protection UL ES 60601-1, CSA C22.2 No. 60601-1 z Over temperature protection File No. E211696 z 100% burn-in at full rated load z Standby consumption less than 0.5 W z Compliant with CEC and ENERGY STAR efficiency TÜV EN 60601-1 level V requirements z Compliant with RoHS requirements GENERAL SPECIFICATIONS 5 ms minimum at 100 VAC Hold-up time: INPUT SPECIFICATIONS Turn on delay time: 3 s maximum at 100 VAC Input voltage: 90-264 VAC Power Factor: 0.95 typical Input frequency: 50-60 Hz Efficiency: 87% min. at 100 VAC or 240 VAC Input current: 2.4 A (rms) for 115 VAC Line regulation: ±0.5% maximum at full load 1.2 A (rms) for 230 VAC Inrush current: 45 A @ 115 VAC or 90 A @ 230 VAC at 25℃ Earth leakage current: 200 μA max. @ 264 VAC, 63 Hz cold start Touch current: 100 μA max. @ 264 VAC, 63 Hz Withstand voltage: 4000 VAC from input to output (2 MOPP) MTBF: 1500 VAC from input to ground (1 MOPP) 100,000 hours at full load at 25℃ ambient, OUTPUT SPECIFICATIONS calculated per MIL-HDBK-217F Output voltage /current: See rating chart. Maximum output power: See rating chart. Ripple and noise: 380 mV peak to peak maximum EMC Performance (IEC60601-1-2) Overvoltage protection: Set at 130% to 150% of its nominal EN55011: Class B conducted, class B radiated output voltage FCC: Class B conducted, class B radiated Overcurrent protection: All models protected to short-circuit VCCI: Class B conducted, class B radiated conditions EN61000-3-2: Harmonic distortion, class A and D Transient response: Maximum excursion of 4% or better on EN61000-3-3: Line flicker all models, recovering to 1% of final EN61000-4-2: ESD, ±8 KV air and ±6 KV contact value within 500 us after a 25% step EN61000-4-3: Radiated immunity, 3 V/m load change EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3 Vrms Operating temperature: 0℃ to +60℃ Storage temperature: -20℃ to +80℃ EN61000-4-8: Magnetic field immunity, 3 A/m Relative humidity: 10% to 90% non-condensing EN61000-4-11: Voltage dip immunity, 30% reduction for 500 Derating Derate from 100% at +40℃ linearly to ms, 60% reduction for 100 ms, and >95% 50% at +60℃ reduction for 10 ms OUTPUT DERATING CURVE Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 63 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP180-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PMP180 SERIES 180 Watt External Power Supply UNIVERSAL INPUT PMP180 MEDICAL SERIES Measures: 7.76 x 3.46 x 1.73” OUTPUT VOLTAGE/CURRENT RATING CHART (1) Output Model Average Active Min. Max. Ripple & Efficiency (typical) (3) (2) Class I Class II V1 Current Current Tol. Noise Max. Power @ 115 / 230 Vac 0.1 A 15.00 A ±5% 380 mV 180 W PMP180-12 -- 12 V 87 /89% 0.1 A 9.47 A ±5% 380 mV 180 W PMP180-13-2 -- 19 V 88 /90% 0.1 A 7.50 A ±5% 380 mV 180 W PMP180-14 PMP180SF-14 24 V 91 /92% PMP180-15 -- 28 V 0.1 A 6.42 A ±5% 380 mV 180 W 91 /92% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C8 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF electrolytic capacitor in parallel with a 0.1 μF ceramic capacitor across the output. 3. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of the control IC in them for energy saving. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 950 grams (2.09 lbs.) approx. 4. Output connector is 4 pin plug without lock, mating with Kycon P/N KPJX-4S-S socket or equivalent. 5. Refer to Section titled “OPTIONAL OUTPUT CONNECTORS”. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP180-14-B1, for ordering. PIN CHART PIN 1 2 3 4 Shell MODEL PMP180-12 PMP180-13-2 V1 Return & V1 Return & V1 Return & +V1 +V1 PMP180-14 AC Ground AC Ground AC Ground PMP180-15 PMP180SF-14 +V1 +V1 V1 Return V1 Return V1 Return Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 64 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP180-power-supply.html h t t p: / / pow e r. sa ge r. c om