Protek PMP220 SERIES 220 Watt External Power Supply 200-220 WATT MEDICAL POWER SUPPLIES Measures: 7.76 x 3.46 x 1.74” PMP220 SERIES DESCRIPTION The PMP220 series of AC/DC switching power supplies are for 200-220 watts of continuous output power. They are RoHS enclosed in a 94V-0 rated polycarbonate case with an inlet to mate with interchangeable cord for world-wide use. All models meet EN 55011 and FCC class B emission limits, and are designed for medical applications not for life-supporting equipment. FEATURES z High efficiency SAFETY STANDARD APPROVALS z Low ripple & noise z Overvoltage protection z Short-circuit protection z Overpower protection UL ES 60601-1, CSA C22.2 No. 60601-1 z Overcurrent protection File No. E178020 z Over temperature protection z 100% burn-in at full rated load TÜV EN 60601-1 z Standby consumption less than 0.5 W z Compliant with CEC and ENERGY STAR efficiency level V requirements z Compliant with RoHS requirements GENERAL SPECIFICATIONS INPUT SPECIFICATIONS 12 ms minimum at 100 VAC Hold-up time: Input voltage: 90-264 VAC Turn on delay time: 3 s maximum at 100 VAC Input frequency: 47-63 Hz Power Factor: 0.95 typical Input current: 2.5 A (rms) for 115 VAC Efficiency: 87% min. at 100 VAC or 240 VAC 1.2 A (rms) for 230 VAC Line regulation: ±0.5% maximum at full load Earth leakage current: 100 μA max. @ 264 VAC, 63 Hz Touch current: 100 μA max. @ 264 VAC, 63 Hz Inrush current: 100 A @ 115 VAC or 200 A @ 230 VAC at 25℃ cold start Withstand voltage: 5600 VDC from input to output (2 MOPP) OUTPUT SPECIFICATIONS 2100 VDC from input to ground (1 MOPP) Output voltage /current: See rating chart. 700 VDC from output to ground Maximum output power: See rating chart. (To verify AC strength, get correct test Ripple and noise: 1% peak to peak maximum method to avoid power supply damage.) Overvoltage protection: Set at 110% to 130% of its nominal For Class II models, 4000 VAC from input output voltage to output Overcurrent protection: All models protected 110% to 120% of MTBF: 100,000 hours at full load at 25℃ ambient, full load conditions calculated per MIL-HDBK-217F Transient response: Maximum excursion of 4% or better on all models, recovering to 1% of final EMC Performance (IEC60601-1-2) value within 500 us after a 25% step EN55011: Class B conducted, class B radiated load change FCC: Class B conducted, class B radiated VCCI: Class B conducted, class B radiated ENVIRONMENTAL SPECIFICATIONS EN61000-3-2: Harmonic distortion, class A and D Operating temperature: 0℃ to +60℃ EN61000-3-3: Line flicker Storage temperature: -20℃ to +80℃ EN61000-4-2: ESD, ±8 KV air and ±6 KV contact Relative humidity: 10% to 90% non-condensing EN61000-4-3: Radiated immunity, 3 V/m Derating: Derate from 100% at +40℃ linearly to EN61000-4-4: Fast transient/burst, ±2 KV 50% at +60℃ EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 3 Vrms OUTPUT DERATING CURVE EN61000-4-8: Magnetic field immunity, 3 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms, and >95% reduction for 10 ms Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and par 65 t number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP220-power-supply.html h t t p: / / pow e r. sa ge r. c om Protek PMP220 SERIES 220 Watt External Power Supply Measures: 7.76 x 3.46 x 1.74” UNIVERSAL INPUT PMP220 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART (1) Model Output Average Active Min. Max. Ripple & Efficiency (typical) (3) (2) Class I Class II V1 Current Current Tol. Noise Max. Power @ 115 / 230 Vac PMP220-13-2 PMP220SF-13-2 19 V 0.1 A 10.53 A ±5% 190 mV 200 W 87 /87% PMP220-14 PMP220SF-14 24 V 0.1 A 9.17 A ±5% 240 mV 220 W 90 /92% PMP220-15 PMP220SF-15 28 V 0.1 A 7.86 A ±5% 280 mV 220 W 90 /92% 0.1 A 6.11 A ±5% 360 mV 220 W PMP220-17 PMP220SF-17 36 V 90 /92% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C8 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF electrolytic capacitor in parallel with a 0.1 μF ceramic capacitor across the output. 3. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of the control IC in them for energy saving. MECHANICAL SPECIFICATIONS OUTPUT DERATING CURVE (Optional) NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 1.0 kg (2.2 lbs.) approx. 4. Output connector is Molex Mini - Fit receptacle, P/N: 39-01-2060 with female terminal #5556 or equivalent, mating with Molex plug 39-01-2066 and male terminal #5558 or equivalent. It also mates with Molex headers #5566, #5569, or equivalent. 5. Optional output connector is 4-pin plug with lock, Kycon P/N KPPX-4P or equivalent, mating with 4-pin socket, Kycon P/N KPJX-4S-S or equivalent, add the suffix assigned for a selected connector to a wanted model number, e.g. PMP220-13-2-HI, for ordering. PIN CHART SHELL OF CONNECTOR PIN 1 2 3 4 5 6 PIN 1 2 3 4 Class I Class II V1 V1 V1 AC HI +V1 +V1 +V1 +V1 V1 Return NC Return Return Return Ground Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: 66 (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP220-power-supply.html h t t p: / / pow e r. sa ge r. c om