PROTEK PMP31 SERIES 25-30 WATT MEDICAL POWER SUPPLIES 30 Watt External Power Supply Measures: 4.64 x 1.96 x 1.26” PMP31 SERIES DESCRIPTION The PMP31 series of AC/DC switching power supplies are for 25-30 watts of continuous output power. They RoHS are enclosed in a 94V-1 rated polyphenylene-oxide case with an inlet of the IEC320/C14 to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications, not for life-supporting equipment. FEATURES z High efficiency SAFETY STANDARD APPROVALS z Low ripple & noise UL ES 60601-1, CSA C22.2 No. 60601-1 z Overvoltage protection File No. E211696 z Short-circuit protection z Overpower protection z 100% burn-in at full rated load TÜV EN 60601-1 z Standby consumption less than 0.3 W z Compliant with CEC and ENERGY STAR GENERAL SPECIFICATIONS efficiency level V requirements 8 ms minimum at 115 VAC Hold-up time: z Compliant with RoHS requirements 3 s maximum at 115 VAC Turn on delay time: Efficiency: Compliant with Energy Star efficiency level V requirements (see rating chart) INPUT SPECIFICATIONS Line regulation: ±0.5% maximum at full load Input voltage: 90-264 VAC Inrush current: 50 A @ 115 VAC or 100 A @ 230 VAC, at Input frequency: 47-63 Hz 25℃ cold start Input current: 1.0 A (rms) for 115 VAC Withstand voltage: 4000 VAC from input to output (2 MOPP) 0.6 A (rms) for 230 VAC 1500 VAC from input to ground (1 MOPP) Earth leakage current: 200 μA max. @ 264 VAC, 63 Hz Touch current: 100 μA max. @ 264 VAC, 63 Hz 500 VAC from output to ground OUTPUT SPECIFICATIONS MTBF: 300,000 hours at full load at 25℃ ambient, Output voltage /current: See rating chart. calculated per MIL-HDBK-217F Maximum output power: See rating chart. EMC Performance (IEC60601-1-2) 1% peak to peak maximum, except EN55011: Class B conducted, class B radiated Ripple and noise: 75 mVp-p max. for PMP31-10 FCC: Class B conducted, class B radiated Overvoltage protection: Set at 116% to 230% of its nominal VCCI: Class B conducted, class B radiated output voltage EN61000-3-2: Harmonic distortion, class A Overcurrent protection: All models protected to short-circuit EN61000-3-3: Line flicker conditions EN61000-4-2: ESD, ±8 KV air and ±6 KV contact Transient response: Maximum excursion of 4% or better on EN61000-4-3: Radiated immunity, 3 V/m all models, recovering to 1% of final EN61000-4-4: Fast transient/burst, ±2 KV value within 500 us after a 25% step load change EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 3 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms, and >95% ENVIRONMENTAL SPECIFICATIONS reduction for 10 ms Operating temperature: 0℃ to +60℃ Storage temperature: -40℃ to +85℃ Relative humidity: 10% to 90% non-condensing Derating Derate from 100% at +40℃ linearly to 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP31-power-supply.html h t t p: / / pow e r. sa ge r. c om 45 PROTEK PMP31 SERIES 30 Watt External Power Supply UNIVERSAL INPUT PMP31 MEDICAL SERIES Measures: 4.64 x 1.96 x 1.26” OUTPUT VOLTAGE/CURRENT RATING CHART Output Average Active Ripple & Max. Output Efficiency (typical) (1) Model V1 Min. Current Max. Current Tol. Noise Power @ 115 / 230 Vac 5 V 0 A 5.0 A 75 mV 25 W PMP31-10 ±5% 83 /81% ±5% PMP31-11 9 V 0 A 3.33 A 90 mV 30 W 86 /84% 12 V 0 A 2.5 A ±5% 120 mV 30 W PMP31-12 86 /85% PMP31-13 15 V 0 A 2.0 A ±5% 150 mV 30 W 88 /86% 0 A ±5% PMP31-13-1 18 V 1.66 A 180 mV 30 W 88 /86% 24 V 0 A 1.25 A ±5% 240 mV 30 W PMP31-14 89 /87% ±5% PMP31-18 48 V 0 A 0.625 A 480 mV 30 W 91 /90% NOTES: 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS Output (-) connected to Earth Ground NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 260 grams (0.57 lbs.) approx. 4. Output cable is 1500 mm, 18 AWG, except 1000 mm 16 AWG for 5V and 9V output models, so as to comply with CEC and Energy Star efficiency level V requirements. 5. Output connector is 5.5 mm O.D., 2.1 mm I.D., 9.5 mm long barrel female connector, center positive voltage. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP31-power-supply.html h t t p: / / pow e r. sa ge r. c om 46