Protek PMP400 SERIES 400 Watt External Power Supply 400 WATT MEDICAL & ITE POWER SUPPLIES Measures: 9.84 x 4.72 x 1.94” DESCRIPTION PMP400 SERIES The PMP400 series of AC-DC switching power supplies are for 400 watts of continuous output power. They are enclosed in a V-0 rated polycarbonate case with an IEC 320/C14 inlet to RoHS mate with interchangeable cord for world-wide use. All models meet EN55011 class B emission limits, and are designed for medical applications. SAFETY STANDARD APPROVALS FEATURES  BF Class insulation UL ES 60601-1, CSA C22.2 No. 60601-1  Operation up to 5000 meters  Wide input range 90 to 264VAC File No. E178020  Low safety ground leakage current  Less than 300 μA leakage current TÜV EN 60601-1  Efficiency greater than 85%  Overvoltage Protection  Short-Circuit Protection  Overpower Protection  Over temperature Protection  Compliant with RoHs requirements GENERAL SPECIFICATIONS Switching frequency: 85 KHz (typical) INPUT SPECIFICATIONS Efficiency: 85% min. at 115 VAC or 230 VAC Input voltage: 90-264 VAC Hold-up time: 12 ms minimum at 110 VAC & 400 W Input frequency: 47-63 Hz Line regulation: ±0.5% maximum at full load Input current: 4.2 A (rms) @115 VAC, 60 Hz Inrush current: 20 A @ 115 VAC, or 40 A @ 230 VAC, at 2.1 A (rms) @ 230 VAC, 50 Hz Earth leakage current: 300 μA max. @ 264 VAC, 63 Hz 25℃ cold start Touch current: 100 μA max. @ 264 VAC, 63 Hz Withstand voltage: 4000 VAC from input to output (2 MOPP) 1500 VAC from input to ground (1 MOPP) 1500 VAC from output to ground OUTPUT SPECIFICATIONS MTBF: 350,000 hours at full load at 25℃ ambient, Output voltage/current: See rating chart. calculated per MIL-HDBK-217F, excluding Maximum output power: See rating chart. DC fan Ripple and noise: 1% peak to peak maximum Overvoltage protection: Set at 115-140% of nominal output voltage EMC Performance Over current protection: Protected to output short circuit conditions EN55011/EN55022: Class B conducted, class B radiated Thermal shutdown Protected to over temperature conditions FCC: Class B conducted, class B radiated Temperature coefficient: All outputs ±0.04% /℃ maximum VCCI: Class B conducted, class B radiated Transient response: Maximum excursion of 4%, recovering to EN61000-3-2: Harmonic distortion, class A and D 1% of final value within 500 us after a 25% EN61000-3-3: Line flicker step load change EN61000-4-2: ESD, ±8 KV air and ±6 KV contact EN61000-4-3: Radiated immunity, 3 V/m EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3 Vrms Operating temperature: -10℃ to +60℃ EN61000-4-8: Magnetic field immunity, 3 A/m Storage temperature: -40℃ to +85℃ EN61000-4-11: Voltage dip immunity, 30% reduction for Relative humidity: 5% to 95% non-condensing 500 ms, 60% reduction for 100 ms and >95% Derating: Derate from 100% at +40℃ linearly to reduction for 10 ms 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 67 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP400-power-supply.html h t t p: / / pow e r. sa ge r. c om Protek PMP400 SERIES 400 Watt External Power Supply UNIVERSAL INPUT PMP400 MEDICAL & ITE SERIES Measures: 9.84 x 4.72 x 1.94” OUTPUT VOLTAGE/CURRENT RATING CHART Efficiency Output (typical) Min. Max. Current Ripple & Max. Output @ 400 W (2) (1) Model V1 Current at 13 CFM Tol. Noise Power 115/230 Vac PMP400-13-1-S 18 V 0 A 22.23 A ±5% 180 mV 400 W 85 /88% PMP400-14-S 24 V 0 A 16.67 A ±5% 240 mV 400 W 86 /89% PMP400-15-S 28 V 0 A 14.29 A ±5% 280 mV 400 W 86 /89% PMP400-17-S 36 V 0 A 11.12 A ±5% 360 mV 400 W 86 /89% PMP400-18-S 48 V 0 A 8.34 A ±5% 480 mV 400 W 87 /89% NOTES: 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. 2. All models are with build-in fan. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 1.5 Kg (3.28 lbs.) approx. 4. Output connector is Molex Mini - Fit receptacle, P/N: 39-01-2080 with female terminal #5556 or equivalent, mating with Molex plug 39-01-2086 and male terminal #5558 or equivalent. It also mates with Molex headers #5566, #5569, or equivalent. PIN CHART OUTPUT POWER DERATING CURVE PIN NO. 1 2 3 4 5 6 7 8 Polarity +V1 V1 Return 68 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP400-power-supply.html h t t p: / / pow e r. sa ge r. c om