Protek PMP85SF SERIES 85 Watt External Power Supply 85 WATT MEDICAL POWER SUPPLIES Measures: 5.28 x 2.28 x 1.26” PMP85SF SERIES DESCRIPTION The PMP85SF series of AC/DC switching power supplies are for 85 watts of continuous output power. They are enclosed in RoHS a 94V-0 rated polycarbonate case with an IEC320/C8 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications, not for life-supporting equipment. FEATURES SAFETY STANDARD APPROVALS z High efficiency z Low safety ground leakage current UL ES 60601-1, CSA C22.2 No. 60601-1 z Wide input range 90 to 264 VAC File No. E211696 z 100% burn-in z Overvoltage protection TÜV EN 60601-1 z Short-circuit protection z Overpower protection z Compliant with CEC and Energy Star Efficiency level V requirements * No load power consumption less than 0.5 W * Average active efficiency greater than 87% z Compliant with RoHS requirements z Compliant with IPX1 GENERAL SPECIFICATIONS Switching frequency: 75-100 KHz Efficiency: 87% min. INPUT SPECIFICATIONS Hold-up time: 10 ms minimum at 110 VAC Input voltage: 90-264 VAC Line regulation: ±0.5% maximum at full load Input frequency: 47-63 Hz Inrush current: 40 A @ 115 VAC or 80 A @ 230 VAC, at Input current: 1.70 A (rms) for 115 VAC 25℃ cold start 0.90 A (rms) for 230 VAC 4000 VAC from input to output (2 MOPP) Withstand voltage: Touch current: 100 μA max. @ 264 VAC, 63 Hz MTBF: 150,000 hours at full load at 25℃ ambient , calculated per MIL-HDBK-217F EMC Performance (IEC60601-1-2) OUTPUT SPECIFICATIONS EN55011: Class B conducted, class B radiated Output voltage /current: See rating chart. FCC: Class B conducted, class B radiated Maximum output power: See rating chart. VCCI: Class B conducted, class B radiated Ripple and noise: 1% peak to peak maximum EN61000-3-2: Harmonic distortion, class A Overvoltage protection: Provided and set at 112-140% of its EN61000-3-3: Line flicker nominal output voltage EN61000-4-2: ESD, ±8 KV air and ±6 KV contact Overcurrent protection: Protected to short circuit conditions EN61000-4-3: Radiated immunity, 3 V/m Temperature coefficient: ±0.04% /℃ maximum EN61000-4-4: Fast transient/burst, ±2 KV Transient response: Maximum excursion of 4% or better on EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. all models, recovering to 1% of final EN61000-4-6: Conducted immunity, 3 Vrms value within 500 us after a 25% step EN61000-4-8: Magnetic field immunity, 3 A/m load change EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms, and >95% ENVIRONMENTAL SPECIFICATIONS reduction for 10 ms Operating temperature: 0℃ to +60℃ Storage temperature: -40℃ to +85℃ Relative humidity: 5% to 95% non-condensing Derating: Derate from 100% at +40℃ linearly to 50% at +60℃ Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 51 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP85SF-power-supply.html h t t p: / / pow e r. sa ge r. c om Protek PMP85SF SERIES 85 Watt External Power Supply Measures: 5.28 x 2.28 x 1.26” UNIVERSAL INPUT PMP85SF MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Average Active Model Output Min. Max. Ripple & Efficiency (typical) (1) @ 115 / 230 Vac Class II V1 Current Current Tol. Noise Max. Power PMP85SF-13-1 18.0 V 0 A 4.72 A ±5% 180 mV 85 W 88 /89% 19.0 V 0 A 4.47 A ±5% 190 mV 85 W 88 /89% PMP85SF-13-2 PMP85SF-14 24.0 V 0 A 3.54 A ±5% 240 mV 85 W 88 /90% NOTES: 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 410 grams (0.906 lbs.) approx. OUTPUT POWER DERATING CURVE Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP85SF-power-supply.html h t t p: / / pow e r. sa ge r. c om 52