PROTEK PMP90 SERIES 90 Watt External Power Supply 60-90 WATT MEDICAL & ITE POWER SUPPLIES Measures: 5.12 x 3.00 x 1.72” DESCRIPTION PMP90 SERIES The PMP90 series of AC/DC switching power supplies are for 60-90 watts of continuous output power. They are enclosed in RoHS a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC class B emission limits, and are designed for medical and ITE applications, not for life-supporting equipment. FEATURES z Low safety ground leakage current z Both Class I and Class II models are certified to medical and ITE safety standards. z Wide input range 90 to 264 VAC SAFETY STANDARD APPROVALS z Optional output connectors UL ES 60601-1, CSA C22.2 No. 60601-1 z 100% burn-in File No. E178020 z Overvoltage protection z Overcurrent protection TÜV EN 60601-1 z Compliant with CEC and Energy Star Efficiency level IV requirements (except models UL 60950-1, CSA C22.2 No. 60950-1 PMP90-10, PMP90-10-1 and PMP90-11) File No. E137410 * No load power consumption less than 0.5 W * Average active efficiency greater than 85% z Compliant with RoHS requirements TÜV EN 60950-1 INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input voltage: 90-264 VAC Switching frequency: 50-110 KHz Input frequency: 47-63 Hz Power factor: 0.98 Typical Input current: 1.20 A (rms) for 115 VAC Efficiency: 85% min. (except 77% min. for PMP90-10, 0.60 A (rms) for 230 VAC PMP90-10-1, PMP90-11 and PMP90-12) Earth leakage current: 180 μA max. @ 264 VAC, 63 Hz Hold-up time: 15 ms minimum at 110 VAC Touch current: 100 μA max. @ 264 VAC, 63 Hz Line regulation: ±0.5% maximum at full load Inrush current: 50 A @ 115 VAC or 100 A @ 230 VAC, at OUTPUT SPECIFICATIONS 25℃ cold start Output voltage /current: See rating chart. Withstand voltage: 5600 VDC from input to output (2 MOPP) Maximum output power: See rating chart. 2100 VDC from input to ground (1 MOPP) Ripple and noise: 100 mVp-p maximum on 5 V, 6 V and 700 VDC from output to ground 9 V outputs, 1% maximum on other (To verify AC strength, get correct test voltage outputs (12 V, 13.5 V …, 48 V method to avoid power supply damage.) etc.) For Class II models, 4000 VAC from input to Overvoltage protection: Provided and set at 112-140% of its output nominal output voltage MTBF: 150,000 hours at full load at 25℃ ambient , Overcurrent protection: Protected to short circuit conditions calculated per MIL-HDBK-217F Temperature coefficient: ±0.04% /℃ maximum EMC Performance (IEC60601-1-2) Transient response: Maximum excursion of 4% or better on EN55011/EN55022: Class B conducted, class B radiated all models, recovering to 1% of final FCC: Class B conducted, class B radiated value within 500 us after a 25% step VCCI: Class B conducted, class B radiated load change EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8 KV air and ±6 KV contact ENVIRONMENTAL SPECIFICATIONS EN61000-4-3: Radiated immunity, 3 V/m Operating temperature: 0℃ to +60℃ EN61000-4-4: Fast transient/burst, ±2 KV Storage temperature: -40℃ to +85℃ Relative humidity: 5% to 95% non-condensing EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. Derating: Derate from 100% at +40℃ EN61000-4-6: Conducted immunity, 3 Vrms linearly to 50% at +60℃ EN61000-4-8: Magnetic field immunity, 3 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% reduction for 100 ms, and >95% reduction for 10 ms Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 53 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP90-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PMP90 SERIES 90 Watt External Power Supply UNIVERSAL INPUT PMP90 MEDICAL & ITE SERIES Measures: 5.12 x 3.00 x 1.72” OUTPUT VOLTAGE/CURRENT RATING CHART (1) Model Output Average Active Efficiency (typical) Min. Max. Ripple & (2) @ 115 / 230 Vac Class I Class II V1 Current Current Tol. Noise Max. Power 5.0 V 0 A 12.0 A 100 mV 60 W 78 /79% PMP90-10 PMP90F-10 ±5% 6.0 V 0 A 10.0 A ±5% 60 W 78 /79% PMP90-10-1 PMP90F-10-1 100 mV 9.0 V 0 A 7.78 A ±5% 100 mV 70 W 81 /82% PMP90-11 PMP90F-11 12.0 V 0 A 6.67 A ±5% 120 mV 80 W 86 /85% PMP90-12 PMP90F-12 13.5 V 0 A 6.30 A ±5% 135 mV 85 W 86 /85% PMP90-12-1 PMP90F-12-1 15.0 V 0 A 5.67 A ±5% 150 mV 85 W 86 /85% PMP90-13 PMP90F-13 18.0 V 0 A 5.00 A ±5% 180 mV 90 W 86 /85% PMP90-13-1 PMP90F-13-1 19.0 V 0 A 4.74 A ±5% 190 mV 90 W 86 /86% PMP90-13-2 PMP90F-13-2 24.0 V 0 A 3.75 A ±5% 240 mV 90 W 87 /86% PMP90-14 PMP90F-14 30.0 V 0 A 3.00 A ±5% 300 mV 90 W 87 /86% PMP90-16 PMP90F-16 48.0 V 0 A 1.87 A ±5% 480 mV 90 W 88 /87% PMP90-18 PMP90F-18 NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C18 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS OUTPUT POWER DERATING CURVE Shell connected to Earth Ground for PMP90-XX NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 658 grams (1.45 lbs.) approx. 4. Output connector is 4 pin plug without lock, mating with Kycon P/N KPJX-4S-S socket or equivalent. 5. Refer to Section titled “OPTIONAL OUTPUT CONNECTORS”. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP90-14-B1, for ordering. PIN CHART PIN 1 2 3 4 MODEL PMP90-10 PMP90F-10 PMP90-10-1 PMP90F-10-1 PMP90-11 PMP90F-11 PMP90-12 PMP90F-12 PMP90-12-1 PMP90F-12-1 PMP90-13 PMP90F-13 V1 Return +V1 V1 Return +V1 PMP90-13-1 PMP90F-13-1 PMP90-13-2 PMP90F-13-2 PMP90-14 PMP90F-14 PMP90-16 PMP90F-16 PMP90-18 PMP90F-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and par 54 t number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PMP90-power-supply.html h t t p: / / pow e r. sa ge r. c om