PROTEK PU400C SERIES 400 Watt Enclosed with Fan Power Supply 400 WATT ITE POWER SUPPLIES Measures: 7.00 x 4.00 x 1.58” DESCRIPTION PU400 SERIES (LVD) The PU400 series of AC-DC switching power supplies in a package of 4 x 7 x 1.58 inches are capable of delivering 400 RoHS watts of continuous power at 7 CFM forced air cooling or 300 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover-and-fan assembly can be added during manufacturing for 400 watt output without the change of any dimension. The units are certified to IEC/EN/UL 60950-1 and suitable for data networking, computer and telecommunication applications. SAFETY STANDARD APPROVALS FEATURES z 4 x 7 inch footprint with 1.58 inch low profile UL 60950-1, CSA C22.2 No. 60950-1 z 100-240 VAC input with active PFC z 300 watt convection rating up to +50 ℃ z 400 watt output with 7 CFM forced air TÜV EN 60950-1 z Standby output 5VDC at 100mA z EN55022 Class B conducted emissions z Inhibit - TTL low to disable output z Standard PS Off and DC OK signals z Efficiency greater than 88% z Compliant with RoHS requirements INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input voltage: 90-264 VAC Switching frequency: 85 KHz (typical) Input frequency: 47-63 Hz Efficiency: Typical 89% @ 115 VAC, 92% @ 230 VAC Input current: 4.2 A (rms) @115 VAC, 60 Hz Hold-up time: 12 ms minimum at 110 VAC & 400 W 2.1 A (rms) @ 230 VAC, 50 Hz Line regulation: ±0.5% maximum at full load Touch current: 250 μA max. @ 264 VAC, 63 Hz Inrush current: 20 A @ 115 VAC, or 40 A @ 230 VAC, at OUTPUT SPECIFICATIONS 25℃ cold start Output voltage/current: See rating chart. Withstand voltage: 3000 VAC from input to output, Maximum output power: See rating chart. 1500 VAC from input to ground, Ripple and noise: 1% peak to peak maximum 500 VAC from output to ground Remote sense Compensation for cable losses up to 0.5V MTBF: 350,000 hours at full load at 25℃ ambient, Overvoltage protection: Set at 115-140% of nominal output voltage calculated per MIL-HDBK-217F Overcurrent protection: Protected to output short circuit conditions EMC Performance EN55022: Class B conducted, class A radiated Thermal shutdown Protected to overtemperature conditions FCC: Class B conducted, class A radiated Temperature coefficient: All outputs ±0.04% /℃ maximum VCCI: Class B conducted, class A radiated Transient response: Maximum excursion of 4%, recovering to EN61000-3-2: Harmonic distortion, class A and D 1% of final value within 500 us after a 25% step load change EN61000-3-3: Line flicker Standby power 5 V at 100 mA maximum EN61000-4-2: ESD, ±8 KV air and ±4 KV contact EN61000-4-3: Radiated immunity, 3 V/m Fan power 12 V at 250 mA maximum EN61000-4-4: Fast transient/burst, ±1 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 3 Vrms ENVIRONMENTAL SPECIFICATIONS EN61000-4-8: Magnetic field immunity, 1 A/m Operating temperature: -10℃ to +70℃ EN61000-4-11: Voltage dip immunity, 30% reduction for 500 Storage temperature: -40℃ to +85℃ ms and >95% reduction for 10 ms Relative humidity: 5% to 95% non-condensing Derating: Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection and forced-air cooling conditions Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 25 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PU400C-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PU400C SERIES 400 Watt Enclosed with Fan Power Supply UNIVERSAL INPUT PU400 ITE SERIES Measures: 7.00 x 4.00 x 1.58” INTERFACE SIGNALS OUTPUT POWER DERATING CURVE PFD: TTL high for normal operation, low upon loss of input power, turn-on delay time 100-500 ms, turn-off delay time 5 ms minimum Inhibit: TTL low to turn off output DC OK: TTL high when output voltage >95% PS OFF: TTL high to turn off output OUTPUT VOLTAGE/CURRENT RATING CHART Output Efficiency (typical) Min. Max. Current Max. Current Ripple & Max. Output @ 300 W @ 400 W (1) (3) (2) Model V1 Current at convection at 7 CFM Tol. Noise Power 115/230 Vac 115/230 Vac PU400-12B 12 V 0 A 25.00 A 33.34 A ±2% 120 mV 300 W/400 W 90/92 % 88/91 % PU400-13B 15 V 0 A 20.00 A 26.67 A ±2% 150 mV 300 W/400 W 90/92 % 88/91 % PU400-13-1B 18 V 0 A 16.67 A 22.23 A ±2% 180 mV 300 W/400 W 90/92 % 88/91 % PU400-14B 24 V 0 A 12.50 A 16.67 A ±2% 240 mV 300 W/400 W 90/92 % 89/92 % PU400-15B 28 V 0 A 10.72 A 14.29 A ±2% 280 mV 300 W/400 W 90/92 % 89/92 % PU400-17B 36 V 0 A 8.34 A 11.12 A ±2% 360 mV 300 W/400 W 90/92 % 89/92 % PU400-18B 48 V 0 A 6.25 A 8.34 A ±2% 480 mV 300 W/400 W 90/92 % 89/92 % NOTES: 1. Change suffix “B” for U-Bracket form to “C” for enclosed form with cover-and-fan assembly, e.g. PU400-14C. 2. 300 W without moving air or 400 W with 7 CFM forced air provided by user for “B” version, 400 W for “C” version with cover-and-fan assembly 3. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS U-bracket Form Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 26 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PU400C-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PU400C SERIES 400 Watt Enclosed with Fan Power Supply UNIVERSAL INPUT PU400 ITE SERIES Measures: 7.00 x 4.00 x 1.58” MECHANICAL SPECIFICATIONS Enclosed Form NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Dinkle terminal P/N DT-35-B01W-03, with nickel plated M3 screws. 4. P2, P3: M3 x 0.5 screw connectors 5. Connector P4: Molex header 87833-08 or equivalent, mating with Molex housing 51110-0850 or equivalent. 6. Fan connector P5: Molex header 53048-0210 or equivalent, mating with Molex housing 51021-0200 or equivalent. 7. Weight: 1.0 Kg (2.23 lbs.) approx. for U-bracket form, 1.14 Kg (2.52 lbs.) approx. for enclosed form 8. Maximum penetration depth of fixing screws is 4 mm from the outer surface of chassis. PIN CHART CONN P1 (AC) P5 P2 P3 PIN MODEL 1 2 3 1 2 PU400-12B PU400-15B PU400-13B PU400-17B Common +12V Common Ground Live Neutral +V1 Return Fan Return PU400-13-1B PU400-18B PU400-14B CONN P4 PIN MODEL 1 2 3 4 5 6 7 8 PU400-12B PU400-15B PU400-13B PU400-17B Common +5V +V1 Sense -V1 Sense PFD Inhibit DC OK PS OFF Return Standby PU400-13-1B PU400-18B PU400-14B Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 27 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PU400C-power-supply.html h t t p: / / pow e r. sa ge r. c om