PROTEK POWER PUP120-16

PROTEK PUP120 SERIES 120 Watt External Power Supply 96-120 WATT ITE POWER SUPPLIES Measures: 6.58 x 2.56 x 1.46” DESCRIPTION PUP120 SERIES (LVD) The PUP120 series of AC/DC switching power supplies are for 96-120 watts of continuous output power. They RoHS are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C6 inlet to mate with interchangeable
cord for world-wide use. All models meet CISPR 22 and FCC class B emission limits and comply with UL, CSA, IEC and CE requirements. FEATURES
High Efficiency
Low Ripple & Noise
Overvoltage protection
Short-circuit protection SAFETY STANDARD APPROVALS
Overpower protection
Over temperature protection UL 60950 3 rd, CSA C22.2 NO. 60950 3 rd
100% burn-in at full rated load File No. E137410
Standby consumption less than 0.5 W
Compliant with CEC and Energy Star 2.0 Nemko EN 60950: 2000 efficiency level V requirements Certificate NO. PO4202683 * No load power consumption less than 0.5 W * Average active efficienc

87%
Compliant with RoHS requirements GENERAL SPECIFICATIONS Hold-up time: 15 ms minimum at 115 VAC INPUT SPECIFICATIONS Turn on delay time: 2 S maximum Input voltage: 90-264 VAC Power factor: 0.98 typical at 115 VAC Input frequency: 50-60 Hz Efficiency: 86% min. Input current: 2.0 A (rms) for 115 VAC (80% min. for PUP120-12 & PUP120-13 ) 1.0 A (rms) for 230 VAC Line regulation: ±0.5% maximum at full load Touch current: 125 A max. @ 132 VAC, 60 Hz Inrush current: 60 A @ 115 VAC or 120 A @ 230 VAC, at 250 A max. @ 264 VAC, 60 Hz 25 cold start Withstand voltage: 1500 VAC from input to output MTBF: 100,000 hours at full load at 25 ambient, calculated per OUTPUT SPECIFICATIONS MIL-HDBK- 217F Output voltage /current: See rating chart. EMC Performance (EN55024) Maximum output power: See rating chart. EN55022: Class B conducted, Class B radiated Ripple and noise: 350 mV peak to peak maximum FCC: Class B conducted, Class B radiated Overvoltage protection: Set at 110-140% of its nominal output VCCI: Class B conducted, Class B radiated voltage EN61000-3-2: Harmonic distortion, Class A and D Overcurrent protection: All models protected to short circuit EN61000-3-3: Line flicker conditions EN61000-4-2: ESD,±8 KV air and ±4 KV contact Temperature coefficient: All outputs ±0.04% / maximum EN61000-4-3: Radiated immunity, 3 V/m Transient response: Maximum excursion of 4% EN61000-4-4: Fast transient/burst, ±1 KV or better on all models, recovering to EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. 1% of final value within 500 us after a EN61000-4-6: Conducted immunity, 3 Vrms 25% step load change EN61000-4-8: Magnetic field immunity, 1 A/m EN61000-4-11: Voltage dip immunity, 30%reduction for 500 ms, and >95%reduction for 10 ms ENVIRONMENTAL SPECIFICATIONS Operating temperature: 0  to +40 Storage temperature: -20 to +80 Relative humidity: 10% to 95% non-condensing Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 43 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP120-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PUP120 SERIES 120 Watt External Power Supply UNIVERSAL INPUT PUP120 ITE SERIES Measures: 6.58 x 2.56 x 1.46” OUTPUT VOLTAGE/CURRENT RATING CHART Output Average Active Efficiency (typical) Ripple & Max. Output (1) Model @115 / 230 Vac V1 Min. Current Max. Current Tol. Noise Power PUP120-13 15 V 0 A 7.0 A 5% 350 mV 105 W 88 / 87 % 18 V 0 A 6.67 A 350 mV 120 W PUP120-13-1 5% 89 / 88 % 19 V 0 A 6.32 A 350 mV 120 W PUP120-13-2 5% 88 / 88 % PUP120-13-3 20 V 0 A 6.0 A 5% 350 mV 120 W 88 / 88 % PUP120-14 24 V 0 A 5.0 A 5% 350 mV 120 W 89 / 88 % 30 V 0 A 4.0 A 350 mV 120 W PUP120-16 5% 89 / 89 % PUP120-17 36 V 0 A 3.34 A 5% 350 mV 120 W 89 / 88 % 48 V 0 A 2.5 A 350 mV 120 W PUP120-18 5% 89 / 88 % NOTES: 1. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 F tantalum capacitor in parallel with a 0.1 F ceramic capacitor across the output. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 621 grams (1.37 lbs.) approx. 4. Refer to Section titled ““OPTIONAL OUTPUT CONNECTORS””. Add the suffix assigned for a selected connector to a wanted model number, e.g. PUP120-14-BI, for ordering. The output connector shown is for model PUP120-1X-BI, and its pinning is as shown in the following pin chart. PIN CHART SHELL OF 1 2 3 4 PIN CONNECTOR MODEL PUP120-12 PUP120-14 PUP120-13 PUP120-16 V1 Return & V1 Return & V1 Return & PUP120-13-1 PUP120-17 +V1 +V1 AC Ground AC Ground AC Ground PUP120-13-2 PUP120-18 PUP120-13-3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: 44 (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP120-power-supply.html h t t p: / / pow e r. sa ge r. c om