PROTEK POWER PUP121-14

07df030b08282402b201c1a8ac002155 PROTEK PUP121 SERIES 120 Watt External Power Supply 96-135 WATT ITE POWER SUPPLIES Measures: 5.96 x 1.57 x 1.00” DESCRIPTION PUP121/PUP136 SERIES The PUP121/PUP136 series of AC/DC switching power supplies are for 96-135 watts of continuous output RoHS power. They are enclosed in a 94V-0 rated plastic case with an IEC320/C14, IEC320/C6 inlet to mate with interchangeable cord for world-wide use. All models meet EN55022, EN55024 and FCC class B emission limits and comply with UL, CSA, IEC and CE requirements. FEATURES  No load power consumption less than 0.21w  Meet efficiency level Ⅵ  Meet energy star EPS2.0 /ErP lot 7 SAFETY STANDARD APPROVALS  Operating altitude up to 5000 meters  Overvoltage protection (latch) UL 60950 3 rd, CSA C22.2 NO. 60950 3 rd  Short-circuit protection (auto-recovery) File No. E190414  Overpower protection (auto-recovery)  Over temperature protection (latch) TÜV EN 60950-1  High Efficiency  With PFC circuit  100% burn-in at full rated load  Compliant with RoHS requirements GENERAL SPECIFICATIONS Hold-up time: 10 ms minimum at 115 VAC INPUT SPECIFICATIONS Turn on delay time 3 s maximum at 100 VAC Input voltage: 90-264 VAC Power factor: 0.9 typical at 115 VAC Input frequency: 47-63 Hz Efficiency: 89% typical at full load Input current: 1.8 A (rms) for 115 VAC Line regulation: ±0.5% maximum at full load 0.9 A (rms) for 230 VAC Inrush current: 70 A @ 115 VAC or 140 A @ 230 VAC, at 25 Touch current: 250 μA max. @ 264 VAC, 60 Hz ℃ cold start Withstand voltage: 1500 VAC from input to output MTBF: 500,000 hours at full load at 25℃ ambient, calculated per SR332 OUTPUT SPECIFICATIONS Output voltage /current: See rating chart. Maximum output power: See rating chart. EMC Performance Ripple and noise: See rating chart. EN55022: Class B conducted, Class B radiated Overvoltage protection: Set at 110-155% of its nominal output FCC: Class B conducted, Class B radiated voltage VCCI: Class B conducted, Class B radiated Overcurrent protection: All models protected to short circuit EN61000-3-2: Harmonic distortion, Class D conditions EN61000-3-3: Line flicker Temperature coefficient: All outputs ±0.04% /℃ maximum EN55024 Transient response: Maximum excursion of 4% EN61000-4-2: ESD,±8 KV air and ±4 KV contact or better on all models, recovering to EN61000-4-3: Radiated immunity, 3 V/m 1% of final value within 500 us after a EN61000-4-4: Fast transient/burst, ±1 KV 25% step load change EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 1 A/m EN61000-4-11: Voltage dip immunity, 30%reduction for 500 ENVIRONMENTAL SPECIFICATIONS ms, and >95%reduction for 10 ms Operating temperature: 0℃℃ to +40 Storage temperature: -20℃℃ to +80 Operating humidity: 20% to 80% non-condensing Storge humidity: 10% to 90% non-condensing Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 49 power@sager .com http://power.sager.com/protek-PUP121-power-supply.html http://power.sager.com 07df030b08282402b201c1a8ac002155 PROTEK PUP121 SERIES 120 Watt External Power Supply UNIVERSAL INPUT PUP121/PUP136 ITE SERIES Measures: 5.96 x 1.57 x 1.00” OUTPUT VOLTAGE/CURRENT RATING CHART Average Active Output Ripple & Max. Output Efficiency (typical) (1) (1) Model V1 Min. Current Max. Current Tol. Noise Power @115 / 230 Vac 12 V 0 A 8.00 A 350 mV 96 W PUP121-12 ±5% 89 /89% 12 V 0 A 8.00 A 350 mV 96 W PUP121S-12 ±5% 89 /89% 19 V 0 A 6.32 A 350 mV 120 W PUP121-13-2 ±5% 91 /91% 19 V 0 A 6.32 A 350 mV 120 W PUP121S-13-2 ±5% 91 /91% PUP121-14 24 V 0 A 5.00 A ±5% 350 mV 120 W 90 /90% PUP121S-14 24 V 0 A 5.00 A ±5% 350 mV 120 W 90 /90% PUP121-18 48 V 0 A 2.50 A ±5% 350 mV 120 W 91 /90% PUP121S-18 48 V 0 A 2.50 A ±5% 350 mV 120 W 91 /90% 54 V 0 A 2.22 A 350 mV 120 W PUP121-19 ±5% 92 /92% 54 V 0 A 2.22 A 350 mV 120 W PUP121S-19 ±5% 92 /92% 19 V 0 A 7.10 A 350 mv 135 W PUP136-13-2 ±5% 91 /91% 19 V 0 A 7.10 A 350 mv 135 W PUP136S-13-2 ±5% 91 /91% NOTES: 1. PUP121/PUP136 models are equipped with IEC320/C14 inlet, and PUP121S/PUP136S models with IEC320/C6 inlet. 2. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 450 grams (0.99 lbs.) approx. PIN CHART SHELL OF 1 2 3 4 PIN NO. CONNECTOR V1 Return & AC V1 Return & AC V1 Return & AC Polarity +V1 +V1 Ground Ground Ground 50 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP121-power-supply.html http://power.sager.com