PROTEK POWER PUP150N-14

PROTEK PUP150N SERIES 150 Watt External Power Supply 120-150 WATT ITE POWER SUPPLIES Measures: 6.73 x 2.83 x 1.65” DESCRIPTION PUP120N/PUP150N SERIES (LVD) The PUP120N/PUP120NS/PUP150N/PUP150NS series of AC/DC switching power supplies are for 120-150 watts of RoHS continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an inlet of the IEC320/C14 or IEC320/C6 to mate with interchangeable cord for world-wide use. All model meet CISPR 22 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements. FEATURES
High Efficiency
Low Ripple & Noise
Overvoltage protection SAFETY STANDARD APPROVALS
Short-circuit protection
Overpower protection
Over temperature protection UL 60950-1, CSA C22.2 No. 60950-1 File No. E190414
100% burn-in at full rated load
No load power consumption less than 0.5 W
Compliant with CEC and Energy Star efficiency level V TUV EN 60950-1 requirements
Compliant with RoHS requirements GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Hold-up time: 3 ms minimum at 100 VAC Input voltage: 90-264 VAC Turn on delay time: 5 s maximum at 100 VAC Input frequency: 50-60 Hz Power factor: 0.95 typical 2.0 A (rms) for 115 VAC Input current: Efficiency: 86% min at 110 VAC or 240 VAC. 1.0 A (rms) for 230 VAC Line regulation: ±0.5% maximum at full load Touch current: 125
A max. @ 132 VAC, 60 Hz 250
A max. @ 264 VAC, 60 Hz Inrush current: No damage Withstand voltage: 1500 VAC from input to output and ground 100,000 hours at full load at 25 ambient, MTBF: OUTPUT SPECIFICATIONS Output voltage /current: See rating chart. EMC Performance Maximum output power: See rating chart. EN55022: Class B conducted, Class B radiated Ripple and noise: 380 mV peak to peak maximum FCC: Class B conducted, Class B radiated Overvoltage protection: Set at 110-140% of its nominal output voltage VCCI: Class B conducted, Class B radiated Overcurrent protection: All models protected to short EN61000-3-2: Harmonic distortion, Class D circuit conditions EN61000-3-3: Line flicker All outputs ±0.04% / maximum Temperature coefficient: (EN55024) Transient response: Maximum excursion of 4% or better on EN61000-4-2: ESD,±8 KV air and ±4 KV contact all models, recovering to 1% of final EN61000-4-3: Radiated immunity, 3 V/m value within 500 us after a 25% step load change EN61000-4-4: Fast transient/burst, ±1 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 3 Vrms EN61000-4-8: Magnetic field immunity, 1 A/m ENVIRONMENTAL SPECIFICATIONS EN61000-4-11: Voltage dip immunty, 30% eduction for 500 Operating temperature: 0

to +40 ms, and >95% reduction for 10 ms Storage temperature: -20

to +80 Relative humidity: 10% to 90% non-condensing Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 47 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP150N-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PUP150N SERIES 150 Watt External Power Supply UNIVERSAL INPUT PUP120N/PUP150N ITE SERIES Measures: 6.73 x 2.83 x 1.65” OUTPUT VOLTAGE/CURRENT RATING CHART Average Active Output efficiency (typical) Ripple & (1) (2) @ 115 / 230 Vac Model V1 Min. Current Max. Current Tol. Noise Max. Power 380 mV 120 W PUP120N-12 12 V 0 A 10 A
5% 89 / 91 % PUP120NS-12 12 V 0 A 10 A 5% 380 mV 120 W 89 / 91 % PUP150N-12 12 V 0 A 12.5 A +3%/ -7% 380 mV 150 W 89 / 90 % PUP150NS-12 12 V 0 A 12.5 A +3%/ -7% 380 mV 150 W 89 / 90 % PUP150N-13-2 19 V 0 A 7.89 A 5% 380 mV 150 W 89 / 91 % 0 A 380 mV 150 W PUP150NS-13-2 19 V 7.89 A 5% 89 / 91 % PUP150N-14 24 V 0 A 6.25 A 5% 380 mV 150 W 90 / 92 % 0 A 380 mV 150 W PUP150NS-14 24 V 6.25 A 5% 90 / 92 % NOTES: 1. PUP120N/PUP150N models are equipped with IEC320/C14 inlet, and PUP120NS/PUP150NS models with IEC320/C6 inlet. 2. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 F tantalum capacitor in parallel with a 0.1 F ceramic capacitor across the output. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 800 grams (1.76 lbs.) approx. 4. Refer to Section titled ““OPTIONAL OUTPUT CONNECTORS””. Change suffix assigned for a selected connector to a wanted model number, e.g. PUP150N-14-B1, for ordering. 5. The length of output cable for output voltage 12V is 37.4 (950.0). PIN CHART SHELL OF PIN 1 2 3 4 CONNECTOR MODEL PUP120N-12 PUP150N-13-2 PUP120NS-12 PUP150NS-13-2 V1 Return & V1 Return & V1 Return & +V1 +V1 AC Ground AC Ground AC Ground PUP150N-12 PUP150N-14 PUP150NS-12 PUP150NS-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 48 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP150N-power-supply.html h t t p: / / pow e r. sa ge r. c om