PROTEK POWER PUP180-18

PROTEK PUP180 SERIES 180 Watt External Power Supply 180 WATT ITE POWER SUPPLIES Measures: 6.69 x 3.35 x 1.60” PUP180 SERIES DESCRIPTION (LVD) The PUP180 series of AC/DC switching power supplies are for 180 watts of continuous output power. They are enclosed in a RoHS 94V-1 rated polyphenylene-oxide case with an IEC320/C14 or C6 inlet to mate with interchangeable cord for world-wide use. All models meet CISPR 22 and FCC class B emission limits, and
comply with UL, CSA, IEC and CE requirements. FEATURES
High Efficiency
Low Ripple & Noise
Overvoltage protection SAFETY STANDARD APPROVALS
Short-circuit protection
Overpower protection UL 60950, CSA C22.2 NO. 60950
Over temperature protection
100% burn-in at full rated load
Compliant with CEC and Energy Star TÜV EN60950-1 efficiency level V requirements * No load power consumption less than 0.5 W * Average active efficiency greater than 87%
Compliant with RoHS requirements GENERAL SPECIFICATIONS Hold-up time: 5 ms minimum at 100 VAC or 240 VAC Turn on delay time: 3 s maximum at 100 VAC Power factor: 0.99 @ 115 Vac/60 Hz, Full load INPUT SPECIFICATIONS 0.95 @ 230 Vac/50 Hz, Full load Input voltage: 90-264 VAC Efficiency: 87% minimum at 100 VAC or 240 VAC Input frequency: 50-60 Hz Inrush current: No damage Input current: 2.5 A (rms) for 115 VAC Withstand voltage: 1500 VAC from input to output, 1.25 A (rms) for 230 VAC 1500 VAC from input to ground Touch current: 125 A max. @ 132 VAC, 60 Hz MTBF: 100,000 hours at full load at 25
ambient, 250 A max. @ 264 VAC, 60 Hz calculated per MIL-HDBK- 217F OUTPUT SPECIFICATIONS EMC Performance (EN55024) Output voltage /current: See rating chart. EN55022: Class B conducted, Class B radiated Maximum output power: See rating chart. FCC: Class B conducted, Class B radiated Ripple and noise: 380 mV peak to peak maximum VCCI: Class B conducted, Class B radiated Overvoltage protection: Set at 110-140% of its nominal output EN61000-3-2: Harmonic distortion, Class D voltage EN61000-3-3: Line flicker Overcurrent protection: All models protected to short circuit EN61000-4-2: ESD,±8 KV air and ±4 KV contact conditions EN61000-4-3: Radiated immunity, 3 V/m Temperature coefficient: All outputs ±0.04% /
maximum EN61000-4-4: Fast transient/burst, ±1 KV Transient response: Maximum excursion of 4% or better on EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. all models, recovering to 1% of final EN61000-4-6: Conducted immunity, 3 Vrms value within 500 us after a 25% step EN61000-4-8: Magnetic field immunity, 1 A/m load change EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms ENVIRONMENTAL SPECIFICATIONS Operating temperature: 0

to +40 Storage temperature: -20

to +80 Relative humidity: 10% to 90% non-condensing Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 49 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP180-power-supply.html h t t p: / / pow e r. sa ge r. c om PROTEK PUP180 SERIES 180 Watt External Power Supply UNIVERSAL INPUT PUP180 ITE SERIES Measures: 6.69 x 3.35 x 1.60” OUTPUT VOLTAGE/CURRENT RATING CHART Output Average Active efficiency (typical) Ripple & (2) (1) @ 115 / 230 Vac Model V1 Min. Current Max. Current Tol. Noise Max. Power 0 A 10.0 A 380 mV 180 W PUP180-13-1 18 V 5% 87 / 90 % PUP180S-13-1 18 V 0 A 10.0 A 5% 380 mV 180 W 87 / 90 % 0 A 9.47 A 5% 380 mV 180 W PUP180-13-2 19 V 88 / 91 % 0 A 9.47 A 5% 380 mV 180 W PUP180S-13-2 19 V 88 / 91 % PUP180-14 24 V 0 A 7.5 A 5% 380 mV 180 W 89 / 92 % 0 A 7.5 A 5% 380 mV 180 W PUP180S-14 24 V 89 / 92 % 5% PUP180-18 48 V 0 A 3.75 A 380 mV 180 W 90 / 93 % PUP180S-18 48 V 0 A 3.75 A 5% 380 mV 180 W 90 / 93 % NOTES: 1. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 F electrolytic capacitor in parallel with a 0.1 F ceramic capacitor across the output. 2. PUP180 models are equipped with IEC320/C14 inlet, and PUP180S models with IEC320/C6 inlet. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 860 grams (1.892 lbs.) approx. 4. Refer to Section titled ““OPTIONAL OUTPUT CONNECTORS””. Change suffix assigned for a selected connector to a wanted model number, e.g. PUP180-14-B1, for ordering. PIN CHART SHELL OF 1 2 3 4 PIN CONNECTOR MODEL PUP180-13-1 PUP180-14 V1 Return & V1 Return & V1 Return & +V1 +V1 AC Ground AC Ground AC Ground PUP180-13-2 PUP180-18 50 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/protek-PUP180-power-supply.html h t t p: / / pow e r. sa ge r. c om