PulseJack™ Surface Mount 1x1 Description: 100 Base-TX (Fast Ethernet) surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cars (NIC). Features and Benefits: RoHS peak wave reflow temperature rating 245°C J0C SMT product, reduced size and low cost alternative SMT Contacts to JV series JV0 Meets IEEE 802.3 specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement J0C J30 Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C Insertion Common Mode Return Loss Crosstalk Turns Tab Hipot 1 Loss Rejection RoHS LEDs (dB MIN) BST EMI (dB MIN) (Vrms MIN) Ratios Option (dB MAX) (dB MIN) Compliant L/R 100Ω (±15Ω) Circuit Finger Up/Down Part No. 1-65 1-10 30 60-80 1-10 30-60 60-100 1-50 50-130 @ 60 Hz TX RX MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN J0C-0003NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 J0C-0004NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 J0C-0005NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 J0C-0006NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 JV006I21NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JV011I21NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 J3026G21DNL 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 3 JX30-0005NL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 Notes: 1. LEDs Left/Righ 3 t: G = green; Y = yellow. 2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T). 3. Extended Temperature: -40° to 85° C RJ45 Durability Test Rating Mating Force Unmating Force Durability Plug to Jack Part Number (MAX) (MAX) Retention (MIN) J0C/JV/J3 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 1 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 RJ45 Material Specification 2 Housing MSL Shield Contact Rating Part 3 4 Number Material Finish Material Plating Area Solder Area Material Specification J0C/JV/J3 Brass 20-40µ inches thick Phosphor (X)µ inches gold over Tin matte finish High Temp. UL 94 V-0 1 Series nickel over Brass Bronze 30-80µ inches nickel Thermoplastic Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 4. NL parts are tin matte finish over nickel. 2. MSL = Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5 3. (X) = 30 inches gold for JV and J30 platforms and 15 inches gold for J0C platform. J0C Platform Schematics J0C-0003NL/J0C-0004NL J0C-0005NL/J0C-0006NL TD+ 1 1 TX+ TD+ 1 1 TX+ CT 4 CT 4 75 TD- 2 2 TX- TD- 2 2 TX- 1 : 1 1 : 1 TRANSMIT TRANSMIT RD+3 3 RX+ RD+ 3 3 RX+ CT 5 CT 5 75 6 RD- 6 RX- 6 RD- 6 RX- 1 : 1 1 : 1 RECEIVE 4 RECEIVE 4 NC 7 5 NC 7 5 75 7 7 GND* 8 8 GND 8 8 75 NOTE: Connect GND to PCB ground. 2 pulseelectronics.com J409.O (07/15) PCB SIDE TO PHY CABLE SIDE PCB SIDE TO PHY CABLE SIDE PulseJack™ Surface Mount 1x1 JV Platform Schematics J0C006 JV011 1 TX+ TD+ 2 TD+ 2 1 TX+ CT 1 CT 1 2 TX- TD- 3 TD- 3 2 TX- 1 : 1 1 : 1 TRANSMIT TRANSMIT 3 RX+ RD+ 4 RD+4 3 RX+ CT 6 CT 6 6 RX- RD- 5 RD- 5 6 RX- 1 : 1 1 : 1 RECEIVE RECEIVE 4 4 75Ω 75Ω 5 5 75Ω Ω 75 7 7 0.001µ 75Ω 8 8 C1 SHIELD JV026 1 TX+ TD+ 2 CT 1 2 TX- TD- 3 1 : 1 TRANSMIT 3 RX+ RD+ 4 CT 6 6 RX- RD- 5 1 : 1 RECEIVE 75Ω 4 5 75Ω 75Ω 7 0.001µ 8 75Ω C1 SHIELD 3 pulseelectronics.com J409.O (07/15) PCB SIDE TO PHY PCB SIDE TO PHY CABLE PCB SIDE TO PHY CABLE CABLE PulseJack™ Surface Mount 1x1 J3 Platform Schematics J3011 J3026 1 TX+ TD+ 3 1 TX+ TD+ 3 CT 5 CT 5 TD- 4 2 TX- 2 TX- 1 : 1 TD- 4 1 : 1 TRANSMIT TRANSMIT 3 RX+ 3 RX+ RD+7 RD+7 CT 6 CT 6 6 RX- RD- 8 6 RX- RD- 8 1 : 1 1 : 1 RECEIVE RECEIVE 4 4 75Ω 75Ω 75Ω 75Ω N/C 9 5 9 5 75Ω 75Ω 7 7 0.001µ 0.001µ Ω 75Ω 75 10 8 8 10 C1 JX30-0005NL TD+ 3 1 TX+ CT1 5 2 TX- TD- 4 1 : 1 TRANSMIT RD+ 7 3 RX+ 6 CT2 RD- 8 6 RX- 1 : 1 RECEIVE 4 75Ω 75Ω 75Ω 5 9 7 0.001µ 75Ω 8 10 CT1 4 pulseelectronics.com J409.O (07/15) PCB SIDE TO PHY PCB SIDE TO PHY CABLE PCB SIDE TO PHY CABLE CABLE PulseJack™ Surface Mount 1x1 J0C Platform Mechanicals J0C-0004NL/06NL EMI Fingers EMI Fingers 5 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 JV Platform Mechanicals JV Series JV0XX121 Date Code Country of Origin Inches Dimensions: mm Unless otherwise specified, .010 all tolerances are ± 0,25 6 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 J3 Platform Mechanical J3 Series JX30-0005NL & J3026G21D J30-0005NL J30XXGX1D With EMI Date of Code J3026G21D Country of Origin Date of Code Tabs Country of Origin Inches Dimensions: mm Unless otherwise specified, .010 all tolerances are ± 0,25 7 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 J0C Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector used in each module also provide 1500Vrms minimum Magnetics Modules has been specifically designed for isolation, wide bandwidth with minimal attentuation and the implementation of a 10Base-T and 100Base-TX fast rise times to minimize system level jitter. transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after The connectors provide excellent EMI filtering and are exposure to surface mount soldering temperatures. suitable for adapter card and multiport applications. Pulse The SMT are robust enough to withstand convection has worked closely with the leading IC manufacturers and infrared reflow solder temperatures. Additionally, in providing these 10/100 solutions, thereby assuring compliant leads provide excellent solder-joint reliability compatibility with each transceiver. with a coplanarity of 0.10 (0.004”). The JC0 series meets the stringent open circuit Note: Modules are packaged in trays, unless Tape & Reel inductance requirements imposed by IEEE. When an 8mA is specified (ex: J0C-0003NL for Trays and J0C-0003NLT DC current is applied across the transformer windings, the for Tape & Reel). transformer will provide at least 350µH. The transformers J0C-0003NL/04NL Connector PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the place the decoupling capacitors adjacent to VCC and 50Ω SMT connector should be direct (ideally no change connections. in direction) and of minimum length. 2. Connections to ground should be as short as possible. 8 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 JV Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector isolation, wide bandwidth with minimal attentuation and Magnetics Modules has been specifically designed for fast rise times to minimize system level jitter. the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair The 1X1 SMT RJ45 connectors manufactured by Pulse cable (UTP-3, 5e and 6). are designed to meet all published specifications after exposure to surface mount soldering temperatures. The connectors provide excellent EMI filtering and are The SMT are robust enough to withstand convection suitable for adapter card and multiport applications. Pulse and infrared reflow solder temperatures. Additionally, has worked closely with the leading IC manufacturers compliant leads provide excellent solder-joint reliability in providing these 10/100 solutions, thereby assuring with a coplanarity of 0.10 (0.004”). compatibility with each transceiver. Note: Modules are packaged in trays, unless Tape & Reel is The JC0 series meets the stringent open circuit specified. Please add the suffix “T” for Tape & Reel orders inductance requirements imposed by IEEE. When an 8mA (ex: JVO006121T). Add the suffix “NL” for RoHS compliant DC current is applied across the transformer windings, the parts (ex: JV006I21NLT for Trays and JV006I21NLT for transformer will provide at least 350µH. The transformers Tape & Reel). used in each module also provide 1500Vrms minimum JV006I21 Connector PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the place the decoupling capacitors adjacent to VCC and 50Ω SMT connector should be direct (ideally no change connections. in direction) and of minimum length. 2. Connections to ground should be as short as possible. 9 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 J0C Packaging Specifications J0C Series Weight ..............7.07 grams Tape & Reel ............ 90/reel Tray ........................80/tray Tape and Reel Specification Tape ................... 44x32mm Tube ...................... 25/tube Tray Specification 10 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 JV Packaging Specifications JV Series Weight ................6.6 grams Tape & Reel ..........150/reel Tray ........................45/tray Tape ...................44x32mm Tape and Reel Specification Tray Specification 11 pulseelectronics.com J409.O (07/15) PulseJack™ Surface Mount 1x1 J3 Packaging Specifications J3 Series Weight ................8.1 grams Tape and Reel Specification Tape & Reel ............75/reel Tray ........................ 45/tray Tape ...................56x32mm +0.10 16.95 2.00±0.10 4.00±0.10 Ø1.50 -0 16.80 52.4±0.20 26.2±0.10 56.0±0.30 +0.25 32.0 Ø2.00 0 Tray Specification For More Information Pulse Worldwide Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 12220 World Trade Drive D-71083 Herren- Aerospace Technol- Super Ocean Finance #03-02 Zhongyuan Road San Diego, CA berg ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 92128 Germany 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 U.S.A. High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 Tel: 858 674 8100 Tel: 49 7032 7806 518057 Fax: 65 6287 8998 (Pulse) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2013. Pulse Electronics, Inc. All rights reserved. 12 pulseelectronics.com J409.O (07/15)