SMT POWER INDUCTORS Toroid - Bobcat Series Height: 5.5mm Max Footprint: 12.7mm x 12.7mm Max Current Rating: up to 3.8A Inductance Range: 9.4µH to 439µH 11 Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C Inductance Inductance 100 Gauss 1 Amp DC 9,10 DCR (mΩ) Part Irated ET @ Irated @ 0ADC ET100 H1 Number (A ) (V-µsec) (µH) (µH ±20%) (V-µsec) (Orsted) TYP MAX P0144NL 9.4 3.80 27 31 15.2 10.4 2.65 11.95 P0145NL 13.3 3.13 40 46 18.8 14.6 3.13 14.12 P0146NL 23 2.43 65 75 24.3 25 4.10 18.46 P0147NL 50 1.65 121 139 37.0 56 6.15 27.69 P0148NL 75 1.35 181 208 44.3 83 7.47 33.67 P0149NL 90 1.23 246 283 49.2 100 8.19 36.93 P0150NL 137 0.99 387 445 59.4 152 10.12 45.61 P0151NL 200 0.81 585 673 71.3 220 12.17 54.85 P0152NL 305 0.65 845 972 85.8 331 14.94 67.34 P0153NL 439 0.53 1322 1520 99.6 472 17.83 80.37 1. The reference inductance at rated DC current is a typical value. NOTES: 8. Limit the DC bias (H) to 46 orsteds. Calculate H by multiplying H1 from the table 2. Temperature rise is 50°C in typical buck or boost circuits at 250kHz and by IDC of the application. with the reference ET applied to the inductor. 9. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part 3. Total loss in the inductor is 380mW for 50°C temperature rise above ambient. number (i.e. P0144NL becomes P0144NLT). Pulse complies to industry standard 4. To estimate temperature rise in a given application, determine copper and tape and reel specification EIA481. core losses, divide by 380 and multiply by 50. 10. The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts 2 5. For the copper loss (mW), calculate IDC X RN. are not necessarily RoHS compliant, but are electrically and mechanically equivalent 6. For core loss (mW), using frequency (f in Hertz) and operating flux density to NL versions. If a part number does not have the "NL" suffix, but an RoHS -18 2.7 2.04 (B in Gauss), calculate 6.11 x 10 x B x f . compliant version is required, please contact Pulse for availability. 7. For flux density (B in Gauss), calculate ET (V-µsec) for the application, divide 11. The temperature of the component (ambient plus temperature rise) must be within by ET100 from the table, and multiply by 100. the stated operating temperature range. Mechanical Schematic .060 2X 1,52 .500 .470 MAX � 12,70 11,94 .400 10,16 R � Suggested Pad Layout .215 MAX 5,46 ���� �,�� .390 9,91 .005/0,13 .500 MAX 4 SURFACES 12,70 ����� �������5����� ��,���5��,�� ��,�� Weight . . . . . . . . 1.5 grams Tape & Reel. . . . . . 500/reel Tube . . . . . . . . . . . . 40/tube Inches Dimensions: mm ����� ����� 3&*4�$�4*���0.�0���**$ .010 Unless otherwise specified, all tolerances are ± ���!�"�#!!$�$�%&’� ��,�� ��,�� 0,25 • • • • • • • • • • USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 71 SPM2007 (11/07)