PULSE PA2083.700NLT

SMT Power Inductors Power Beads - PA2083NL Series Current Rating: Over 90Apk Inductance Range: 70nH to 205nH Height: 7.0mm Max Footprint: 7.6mm x 7.4mm Max 7 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C 3 Saturation Current 4 Inductance Inductance Heating 1 (A TYP) 2 Part @ 0ADC @ Irated Irated DCR Current Number (nH ±10%) (nH TYP) (ADC) (mΩ) (A TYP) 25°C 100°C PA2083.700NL * 70 70 27 93 75 PA2083.101NL * 105 105 27 61 54 PA2083.121NL * 120 120 27 55 48 27 0.60 ±8% PA2083.161NL * 160 160 27 41 38 PA2083.181NL * 185 170 27 36 33 PA2083.201NL * 205 177 27 32 29 Notes: 5. In high volt*time applications, additional heating in the component can occur due to 1. The rated current as listed is either the saturation current or the heating current depending core losses in the inductor which may necessitate derating the current in order to limit on which value is lower. the temperature rise of the component. To determine the approximate total losses (or 2. The nominal DCR is measured from point a to point b , as shown on the mechanical temperature rise) for a given application, the coreloss and temperature rise curves can drawing below. be used. 3. The saturation current is the typical current which causes the inductance to drop by 20% at 6. Optional tape and reel packaging can be ordered by adding a “T” suffix to the part the stated ambient temperatures (25°C and 100°C). This current is determined by placing the number (i.e. PA2083.700NL becomes PA2083.700NLT). Pulse complies to industry component in the specified ambient environment and applying a short duration pulse standard tape and reel specification EIA481. current (to eliminate self-heating effects) to the component. 7. The temperature of the component (ambient plus temperature rise) must be within the 4. The heating current is the DC current which causes the part temperature to increase by stated operating temperature range. approximately 40°C. * Contact Pulse for availability Mechanical Schematic PA2083.XXXNL Weight ................................1.5 grams Tape & Reel .........................500/reel Inches Dimensions: mm D/C CTRY .010 Unless otherwise specified, all tolerances are ± 0,25 USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 1 pulseelectronics.com P659.E (03/14) SMT Power Inductors Power Beads - PA2083NL Series For More Information Pulse Worldwide Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 12220 World Trade Drive D-71083 Herren- Aerospace Technol- Super Ocean Finance #03-02 Zhongyuan Road San Diego, CA berg ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 92128 Germany 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 U.S.A. High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Tel: 858 674 8100 Tel: 49 7032 78060 518057 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Fax: 858 674 8262 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2014. Pulse Electronics, Inc. All rights reserved. 2 pulseelectronics.com P659.E (03/14)