Manufacturers
PULSE PB2115NLT
Description
Switching Transformer 1:0.1:0.15 0.25Ohm/0.02Ohm Prim. DCR 0.00325Ohm Sec. DCR 10W 8Term. Gull Wing SMD
PB2115NLT
Part Number
PB2115NLT
Price
Request Quote
Manufacturer
PULSE
Lead Time
Request Quote
Category
Magnetics » Switching Transformer
Specifications
Manufacturer
Pulse
Manufacturers Part #
PB2115NLT
Industry Aliases
PB2115NLT
Sub-Category
Switching Transformers
Packaging
Tape and Reel
Factory Pack Quantity
200
Datasheet
Extracted Text
High Frequency Wire Wound Transformers EP10 Platforms - SMT Power Range: up to 30W Height: 11.45mm Max Footprint: 15.24mm x 13.1mm Max Toplogy: Forward and Flyback 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (3-4) 253.4µH ± 10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 7.5µH MAX (3-4) 420mΩ MAX PA1133NL DCR (6, 5-8, 7) 7.5mΩ MAX (2-1) 115mΩ MAX Hi-Pot Pri-Sec 1500Vrms FLYBACK TRANSFORMER K1 Factor 4671.8 Pri. Inductance (3-4) 253.4µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 7.5µH MAX (3-4) 420mΩ MAX PA1134NL DCR (6, 5-8, 7) 16mΩ MAX (2-1) 115mΩ MAX Hi-Pot Pri-Sec 1500Vrms FLYBACK TRANSFORMER K1 Factor 4671.8 Pri. Inductance (3-4) 264.1µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 6 µH MAX (3-4) 800mΩ MAX PA1135NL DCR (6, 5-8, 7) 45mΩ MAX (2-1) 115mΩ MAX Hi-Pot Pri-Sec 1500Vrms FLYBACK TRANSFORMER K1 Factor 4769.7 USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 1 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (3-4) 253.4 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 12 µH MAX (from pin 8 to 5) (3-4) 420 mΩ MAX (2-1) 335 mΩ MAX PA1253NL DCR (5-6) 9.5 mΩ MAX (7-8) 7.2 mΩ MAX Hi-Pot Pri-Sec 1500Vrms FLYBACK TRANSFORMER K1 Factor 4671.8 Pri. Inductance (3-4) 20.4µH ±10% (3-4) with Lk. Inductance (10, 9, 8, 7) shorted 1.5 µH MAX (3-4) 80 mΩ MAX PA1277NL DCR (6, 5-8, 7) 7.5 mΩ MAX (2-1) 150 mΩ MAX Hi-Pot Pri-Sec 1500Vrms K1 Factor 1002.9 FLYBACK TRANSFORMER Pri. Inductance (3-4) 155 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 5 µH MAX (3-4) 530 mΩ MAX PA1282NL DCR (6, 5-8, 7) 31 mΩ MAX (2-1) 900 mΩ MAX Hi-Pot Pri-Sec 1500Vrms K1 Factor 3117.5 FLYBACK TRANSFORMER Pri. Inductance (3-4) 155 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 5 µH MAX (3-4) 570 mΩ MAX PA1283NL DCR (6, 5-8, 7) 40 mΩ MAX (2-1) 1000 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms K1 Factor 3117.5 FLYBACK TRANSFORMER 2 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (3-4) 155 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 5 µH MAX (3-4) 540 mΩ MAX PA1284NL DCR (6, 5-8, 7) 370 mΩ MAX (2-1) 920 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 3117.5 Pri. Inductance (3-4) 20.4 µH ±10% (3-4) with Lk. Inductance (8,5) shorted 1.5 µH MAX (3-4) 80 mΩ MAX PA1370NL DCR (5-8) 30 mΩ MAX (2-1) 105 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 1002.9 Pri. Inductance (3-4) 185 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 10 µH MAX (3-4) 420 mΩ MAX PA1721NL DCR (6, 5-8, 7) 12 mΩ MAX (2-1) 115 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FORWARD TRANSFORMER K1 Factor 3410.8 Pri. Inductance (3-4) 25.2µH ±10% (3-4) with Lk. Inductance (1, 2, 8, 7, 6, 5) shorted 0.55 µH MAX (3-4) 135 mΩ MAX PA2362NL DCR (6, 5-8, 7) 11 mΩ MAX (2-1) 115 mΩ MAX Hi-Pot Pri-Sec 1500 Vdc K1 Factor 1115.0 FLYBACK TRANSFORMER 3 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (3-4) 25.2 µH ±10% (3-4) with Lk. Inductance (1, 2, 8, 7, 6, 5) shorted 0.85 µH MAX (3-4) 135 mΩ MAX PA2363NL DCR (6, 5-8, 7) 9 mΩ MAX (2-1) 180 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 1115.0 Pri. Inductance (3-4) 25.2µH ±10% (3-4) with Lk. Inductance (1, 2, 8, 7, 6, 5) shorted 1 µH MAX (3-4) 145 mΩ MAX PA2364NL DCR (6, 5-8, 7) 7.5 mΩ MAX (2-1) 110 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 1059.4 Pri. Inductance (3-4) 24µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 0.75 µH MAX (3-4) 82 mΩ MAX PA2454NL DCR (6, 5-8, 7) 13 mΩ MAX (2-1) 80 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms K1 Factor 1179.9 FLYBACK TRANSFORMER Pri. Inductance (3-4) 24 µH ±10% (1-4) with Lk. Inductance (8, 7, 6, 5) shorted 0.6 µH MAX (3-4) 90 mΩ MAX DCR PA2455NL (6, 5-8, 7) 23 mΩ MAX (2-1) 130 mΩ MAX Hi-Pot Pri-Sec 1500 Vdc K1 Factor 1179.9 FLYBACK TRANSFORMER 4 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (3-4) 24 µH ±10% (3,4) with Lk. Inductance (8, 7, 6, 5) shorted 0.6 µH MAX (3-4) 86 mΩ MAX PA2456NL DCR (6, ,5-8, 7) 86 mΩ MAX (2-1) 470 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 1179.9 Pri. Inductance (3-4) 50.5 µH ±10% (3-4) with Lk. Inductance (8, 7, 6, 5) shorted 1.4 µH MAX (3-4) 420 mΩ MAX PA2627NL DCR (6, 5-8, 7) 47 mΩ MAX (2-1) 174 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 1241.4 Pri. Inductance (4-1) with 3,2 shorted 40 µH ±10% (4-1) with 3,2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.45 µH MAX (3-4) 410 mΩ MAX PA3948.001NL DCR (6, 5-8, 7)) 140 mΩ MAX (2-1) 140 mΩ MAX FLYBACK TRANSFORMER Hi-Pot Pri-Sec 1500 Vdc K1 Factor 1241.4 Pri. Inductance (4-1) with 3,2 shorted 40 µH ±10% (4-1) with 3.2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.45 µH MAX (4-1) 405 mΩ MAX PA3948.002NL DCR (8-6) 470 mΩ MAX (7-5) 470 mΩ MAX Hi-Pot Pri-Sec 1500 Vdc FLYBACK TRANSFORMER K1 Factor 983.3 5 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT 5 Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C Pri. Inductance (4-1) with 3, 2 shorted 40 µH ±10% (4-1) with 3, 2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.45 µH MAX (4-1) 405 mΩ MAX PA3948.003NL DCR (8-6) 470 mΩ MAX (7-5) 470 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms K1 Factor 983.3 FLYBACK TRANSFORMER Pri. Inductance (4-1) with 3, 2 shorted 40 µH ± 10% (4-1) with 3, 2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.45 µH MAX (4-1) 220 mΩ MAX PA3948.004NL DCR (8-6) 58 mΩ MAX (7-5) 58 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 983.3 Pri. Inductance (4-1) with 3, 2 shorted 40 µH ±10% (4-1) with 3, 2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.6 µH MAX (4-1) 220 mΩ MAX DCR PA3948.005NL (7-6) 1275 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 983.3 Pri. Inductance (4-1) with 3, 2 shorted 40 µH ±10% (4-1) with 3, 2 shorted 32 µH Min at 1.88A (4-1) with Lk. Inductance (5, 6, 7, 8) shorted 1.65 µH MAX (4-1) 220 mΩ MAX PA3948.006NL DCR (7-6) 3350 mΩ MAX Hi-Pot Pri-Sec 1500 Vrms FLYBACK TRANSFORMER K1 Factor 983.3 6 pulseelectronics.com P742.D (02/16) High Frequency Wire Wound Transformers EP10 Platforms - SMT Notes: 1. The temperature of the component (ambient plus temperature rise) must be within the 5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part stated operating temperature range. number (i.e. PA1133NL becomes PA1133NLT). Pulse complies with industry standard tape 2. The above transformers and inductors have been tested and approved by Pulse’s power and reel specification EIA481. The tape and reel for this product has a width (W=32mm), IC partners and are sited in the appropriate datasheet or evaluation board documentation pitch (Po=24mm) an depth (Ko=11.6mm). at these companies. To determine which IC and IC partners are matched with the above Pulse part numbers please consult the IC Cross Reference on the Pulse website. 3. For flyback topology applications, it is necessary to ensure that the transformer will not saturate in the application. The peak flux density (Bpk) should remain below 2700Gauss. To calculate the peak density, use the following formula: Bpk (Gauss) = K1_Factor * Ipk (A) 4. In high volt-sec applications, it is important to calculate the core loss of the transformer. Approximate transformer core loss can be calculated as: 1.63 2.63 CoreLoss (W) = 2.5E-14 * (Freq_kHz) * (ΔB_Gauss) where ΔB can be calculated as: For Flyback Topology: ΔB = K1_Factor * (A) For Forward Topology: ΔB = K1_Factor * Volt-µsec Mechanical PAXXXXNL PAXXXNL Date Code Country of Origin For More Information Pulse Worldwide Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 12220 World Trade Drive D-71083 Herrenberg Aerospace Technology Bldg. Super Ocean Finance Ctr. #03-02 Zhongyuan Road San Diego, CA 92128 Germany 10th Kejinan Road 2067 Yan An Road West PM Industrial Bldg. Zhongli City U.S.A. High-Tech Zone Shanghai 200336 Singapore 368363 Taoyuan County 320 Nanshan District China Taiwan R. O. C. Shenzhen, PR China 518057 Tel: 886 3 4356768 Tel: 858 674 8100 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 86 21 62787060 Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Fax: 858 674 8262 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Fax: 86 2162786973 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2016. Pulse Electronics, Inc. All rights reserved. 7 pulseelectronics.com P742.D (02/16)
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the PB2115NLT?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods