PULSE PF0382.153T

SMT POWER INDUCTORS Unshielded Drum Core - PF0382NL Series Height: 11.3mm Max Footprint: 13.0mm x 9.4mm Max Current Rating: up to 4.9A Inductance Range: 10µH to 1000µH RoHS compliant version available on request 7 Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C 1 3 4 Inductance Inductance Saturation Heating 5,6 2 Part Irated DCR @ Irated @ 0ADC Current ISAT Current IDC Number (A) (mΩ MAX) (µH TYP) (µH ±20%) (A) (A) PF0382.103NL 9 4.90 24 10 8.30 4.90 PF0382.153NL 14 4.20 31 15 7.10 4.20 PF0382.223NL 20 3.50 47 22 5.60 3.50 PF0382.333NL 30 3.10 65 33 4.30 3.10 PF0382.473NL 42 2.70 90 47 3.80 2.70 PF0382.683NL 61 1.90 130 68 3.10 1.90 PF0382.104NL 90 1.50 200 100 2.60 1.50 PF0382.154NL 140 1.20 280 150 2.10 1.20 PF0382.224NL 200 1.10 360 220 1.70 1.10 PF0382.334NL 297 0.80 580 330 1.35 0.80 PF0382.474NL 423 0.60 860 470 1.15 0.60 PF0382.684NL 612 0.50 1200 680 1.05 0.50 PF0382.105NL 900 0.20 2000 1000 0.85 0.20 NOTES: 1. Inductance at Irated is a typical inductance value measured when the determined by mounting the component on a typical application PCB and applying the inductor is subjected to the rated current. current to the device for 30 minutes. 2. The rated current as listed is either the saturation current at 25°C or 5. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number the heating current, depending on which value is lower. (i.e. PF0382.103NL becomes PF0382.103NLT). Pulse complies to industry standard tape 3. The saturation current Isat is the current which causes the inductance and reel specification EIA481. to drop by 10% (typical) at an ambient temperature of 25°C. This 6. The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not current is determined by placing the component in the specified necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. ambient environment and applying a short duration pulse current If a part number does not have the "NL" suffix, but an RoHS compliant version is required, (to eliminate self-heating effects) to the component. please contact Pulse for availability. 4. The heating current IDC is the DC current which causes the tempera- 7. The temperature of the component (ambient plus temperature rise) must be within the ture rise of the part to increase by approximately 40°C. This current is stated operating temperature range. Schematic Mechanical )’**!)�!+���+�$�%&’� ���� � 4*� ���� �,�� ���� ���� ���� ��,�� �,�� �,�� �,�� ((( ���� -�� -�� 4*� 4*� �,�� � ���� ���� ���� �,�� �,�� ��,�� ������,�� -�� -�� -�� ����� ����� ��,�� ��,�� �������5����� Weight . . . . . . . . 2.5 grams ����� ��,���5��,�� Tape & Reel. . . . . . 280/reel ��,�� Inches Dimensions: mm .010 Unless otherwise specified, all tolerances are ± 0,25 ���� 3&*4�$�4*���0.�0���**$ �,�� ���!�"�#!!$�$�%&’� • • • • • • • • • • USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 19 SPM2007 (11/07)