T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms RoHS peak reflow temperature rating 245�C Models matched to leading quad and dual T1/ E1/CEPT/ISDN-PRI transceivers Crosstalk: -65 dB or better UL1950 recognized (some parts pending approval) RoHS compliant versions available upon request Electrical Specifications @ 25�C L C Turns Ratio OCL @ 25�C L ww RoHS Compliant Primary Pins (Pri:Sec ±2%) (mH MIN) (μH MAX) (pF MAX) Package/ Part Number Schematic Std Temp. Ex Temp TX RX TX RX TX RX TX RX Transmit Receive T1064NL - 1:1.14 1:1.14CT 1.2 1.2 .6 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21 T1065NL T1105NL 1:2CT 1:2CT 1.2 1.2 .8 .8 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 24-25, 29-30, 34-35, 39-40 T1068NL T1108NL 1:2CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37 T1071NL - 1:1/1.26 1:2CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37 T1073NL - 1:2 1:2 1.2 1.2 .6 .6 35 35 TOU/4 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20 T1124NL T1114NL 1:2CT 1CT:2 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18 T1142NL T1231NL 1:2.4 1:1 1.0 1.0 .5 .5 35 35 TOU/5 1-2, 8-9, 11-12, 18-19 24-25, 27-28, 34-35, 37-38 T1145NL - 1:2/2.4 1:0.79/1 1.0 1.0 1.0 1.0 35 35 TOU/6 1-2, 9-10, 11-12, 19-20 37-36, 35-34, 27-26 - TX1262NL 1:2 1:2 1.2 1.2 .7 .7 35 35 TOU/5 1-2, 6-7, 11-12, 16-17 3-4, 8-9, 13-14, 18-19 - TX1264NL 1:2CT 1CT:1 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18 - TX1266NL 1:2 1:1 1.2 1.2 .6 .6 35 35 TOU/4 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20 - TX1295NL 1:1.26CT 1:1.26CT 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 24-25, 29-30, 34-35, 39-40 Notes: Chart Notes and TOU Schematics are on page 2. Mechanical TOU Weight ......................3.8 grams Inches .010 Tape & Reel ..................175/reel Dimensions: Unless otherwise specified, all tolerances are ± mm 0,25 Tray ..............................105/tray USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 1 pulseelectronics.com T622.K (04/12) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Notes from Electrical Specifications Table Transformer Selection Guide A. OCL (primary inductance) is measured at the primary winding. Turns ratio is specified primary: Octal SMT IC Mfr. IC Part Number Comments secondary. STD Temp EXT Temp B. To make a 1CT:1 ratio from a 1CT:2CT ratio, use only one-half of the secondary (2CT) winding. C. It is possible to use the same transformer model for the three impedance levels of T1 (100 W) and CEPT Mindspeed BT8510 T1/E1 T1071NL - (75 Ω & 120 Ω). For specific connection information and resistor values, refer to IC vendor’s data (Conexant) BT8510 T1/E1 T1071NL - book. D. Dual Ratio Transformer (T1071NL and T1145NL) - These transformers have tapped secondary windings CN8380 T1124NL T1114NL to provide two turns ratios (T/R). Use the entire primary winding and connect the secondary pins T1068NL Cirrus Logic 61318 120 E1 T1108NL listed below to obtain desired turns ratio: T1065NL (Crystal) 61577 T1 & E1 T1105NL Part Turns Secondary Turns Secondary T1068NL 61304A/5A/535A/574A,/75 75 E1 T1108NL Number Ratio 1 Pins Ratio 2 Pins T1071NL 61304A/5A/535A/574A,/75 120 E1 - T1064NL 61582, 61583 - 1:1 40-39 1:1.26 40-38 T1068NL 61310, 61581 T1108NL 1:1 35-34 1:1.26 35-33 T1065NL 61584/84A IQ3 T1105NL T1071NL 1:1 30-29 1:1.26 30-28 T1064NL 61584/82/83/A IQ5 - Maxim T1108NL DS2196 T1068NL 1:1 25-24 1:1.26 25-23 (Dallas) 3V T1108NL DS2148/Q48 T1068NL 1:2 40-39 1:2.4 40-38 T1108NL DS21352/Q352, DS21354/Q354 T1068NL 1:2 33-32 1:2.4 33-31 Exar T5683A, 59L91 T1065NL T1105NL T1145NL 1:2 30-29 1:2.4 30-28 T5894, T5897, T5997 T1065NL T1105NL T5791/T93/94/95 T1071NL - 1:2 23-22 1:2.4 23-21 83L30/34/38 T1065NL T1105NL E. Dual Ratio Transformer for the surface mount package is anti-static tubes. Optional Tape & Reel Infineon PEB22504 3.3V T1142NL T1231NL packaging can be ordered by adding a “T” suffix to the part number, (i.e. T1064NLT). Technologies PEB22554 3.3V T1142NL T1231NL F. Extended Temperature Range Models - For extended temperature range transformers (-40�C to +85�C (Siemens) operating temperature range), OCL (Open Circuit Inductance) for the primary winding) is specified PEB2256 3.3 V E1/T1/J1 T1142NL T1231NL at both -40�C and +25�C. At -40�C, OCL is 600 μH minimum. All other parameters are specified at +25�C Intel LXT 300/301 T1065NL T1105NL only. Standard temperature range is 0�C to +70�C. (Level One) LXT 304/305/307 T1, E1 T1065NL T1105NL Schematics LXT 304/305/307 75 E1, 120E1 T1071NL - LXT 310/317/318 T1068NL TOU T1108NL LXT 331 T1, E1 T1068NL T1108NL LXT 331, LXT 332 T1065NL T1105NL LXT 334, LXT 335 T1/E1 T1065NL T1105NL LXT 334, LXT 335 75 E1 T1071NL - LXT 336 T1065NL T1105NL LXT 350, LXT 351, LXT 359 T1, E1 T1068NL T1108NL LXT 360/361/362/363 T1, E1 T1068NL T1108NL LXT 380/381/384/386/388 T1, E1 T1068NL T1108NL LXT 380/381/384/386/388 T1, E1 T1124NL T1114NL LXT 3104, LXT 3108 T1068 T1108NL Lucent T7689, T769, T7698 DS1 T1064NL - Technologies TLIU04C1 DS1 T1064NL - Zarlink MT9076, MT9075 T1142NL T1231NL (Mitel) MT9074, MT9075 T1068NL T1108NL PMC Sierra PM4318 T1065NL T1105NL 2 pulseelectronics.com T622.K (04/12) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Application Metallic Voltage: 800 V peak, 10/560μsec 1. ET Product - All coils have an ET product of 10 V-μsec Longitudinal Voltage: 2,400 V peak, 10/700μsec minimum. 2. Flammability - Materials used in the products are 8. Isolation Voltage - 100% of transformers are tested during the specified isolation voltage level. recognized as UL94-VO approved. Products meet the IEC 695-2-2 requirements (Needle Flame Test). 9. General Information - The transformers are specifically designed for use in 1.544 Mbps (T1), 2.048 Mbps (CEPT) and ISDN Primary 3. Balance Characteristics - The transformers meet the requirements for longitudinal balance of FCC part 68. rate (PRI) interface applications. They are matched to the majority of the line interface transceiver ICs currently available. Use of the proper transformer allows the interface circuit to 4. Common Mode Rejection Ratio - the CMRR for all comply with ITU-T G.703 and other standards regarding pulse transformers is better than 50dB at 1MHz. A typical test waveform, return loss, and balance. circuit is shown below. 10. Common Mode Chokes - Additional high-frequency 4-line common mode chokes may be used to provide an effective HP-8751A means of complying with national and international regulations P1P2 on EMI. The common mode chokes are designed to be used in conjunction with Pulse’s T1/CEPT transformers as shown in the typical application below. Crosstalk is typically -65 dB or better. 50:100 XFMR 100:50 BALUN BALUN Typical Application 5. Crosstalk Attentuation - In the packages which contain transmit and receive transformers side by side, sufficient crosstalk attentuation is achieved by the inherent characteristics of the toroid cores as well as by their proper positioning. The crosstalk attentuation is typically 65 dB or better. This result was established with the test circuit shown below. HP-8751A 50:100 BALUN P1P2 100 100 100:50 XFMR BALUN 6. Return Loss - ITU-T G.703 and European national regulatory documents specify minimum return loss levels. The transformers will allow these limits to be complied with the situations where they are applicable. Frequency 50-100 kHz 10 kHz-2MHz 2-3 MHz Return Loss Transmit 9 dB 15 dB 11 dB Receive 12 dB 18 dB 14 B 7. Surge Voltage Capability - All transformers and chokes meet surge voltage tests according to the most stringent regulatory documents, when used with the proper voltage and current suppression devices: 3 pulseelectronics.com T622.K (04/12) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Electrical Specifications @ 25°C L C RoHS Compliant Number of Turns Ratio OCL w/w L DCR Isolation Part Number Lines (±5%) (μH MIN) (pF MAX) (μH MAX) (Ω MAX) (Vrms MIN) Package/Schematic High Frequency Common Mode Chokes T8008NL* 16 (8 x 2 line) 1:1 (8 places) 47.0 25 .18 0.40 500 TOU/2 (Surface Mount) PE-65554NL 4 1:1:1:1 24.0 15 .20 0.30 500 IN/1 (Through Hole) PE-65555NL 4 1:1:1:1 8.0 10 .20 0.25 500 IN/1 (Through Hole) PE-65854NL 4 1:1:1:1 47.0 16 .20 0.30 500 SH/1 (Surface Mount) PE-65857NL 4 1:1:1:1 24.0 15 .23 0.30 500 LA/1 (Surface Mount) *Notes: Please see page 1 for TOU mechanical specifications. Schematic 2 TOU 1 40 2 39 3 38 5 36 6 35 7 34 8 33 10 31 11 30 12 29 13 28 15 26 16 25 17 24 18 23 20 21 Mechanicals IN Schematic SH 4 pulseelectronics.com T622.K (04/12) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Mechanical Schematic LA Weight ......................0.3 grams....................2 grams......................2.5 grams Tape & Reel ................1500/reel...................250/reel..............................(N/A) Tray ................................25/tray....................30/tube..........................35/tube Inches Dimensions: mm .010 Unless otherwise specified, all tolerances are ± 0,25 For More Information Pulse Worldwide Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 12220 World Trade Drive D-71083 Herren- Aerospace Technol- Super Ocean Finance #03-02 Zhongyuan Road San Diego, CA berg ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 92128 Germany 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 U.S.A. High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Tel: 858 674 8100 Tel: 49 7032 78060 518057 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Fax: 858 674 8262 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2012. Pulse Electronics, Inc. All rights reserved. 5 pulseelectronics.com T622.K (04/12)