INDEX General Information Page HEAT SHRINK PRODUCTS SELECTION GUIDE 1-2 HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE 3 CABLE TIES CROSS REFERENCE GUIDE 4-8 HEAT SHRINK PRODUCTS INFORMATION 9 HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY 10 TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS 11 HEAT SHRINK PRODUCTS PART NUMBER GUIDE 12 Product Type Heat Shrink Thin Wall Tubing Page Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 13 Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 14 Q2-F3X HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 15 Q2-F4X HIGH SHRINK RATIO, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 4:1 SHRINK RATIO 16 Q2-F2XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 17 Q2-F3XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 17 Q2-HF LOW SMOKE, HALOGEN FREE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 18 Q2-LS VERY LOW SHRINK TEMPERATURE, FLEXIBLE, HALOGEN FREE, POLYOLEFIN TUBING, 2:1 SHRINK RATIO 19 Q2-R SEMI-RIGID, MULTI-PURPOSE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 20 Q2-Z ENVIRONMENT FRIENDLY, FLEXIBLE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 21 Q2-3X FLEXIBLE, THIN WALL, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 22 Q-150K 150°C, BLACK, MODIFIED THIN WALL, FLEXIBLE PVDF TUBING, 2:1 SHRINK RATIO 23 Q-175K 175°C, CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING, 2:1 SHRINK RATIO 24 Q-200E 200°C, VERY FLEXIBLE, MODIFIED FLUOROELASTOMER TUBING (Viton), 2:1 SHRINK RATIO 25 Q-PTFE PTFE HEAT SHRINKABLE TUBING 26 Heat Shrink Medium / Heavy Wall Tubing Page Q5-2X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 2:1 SHRINK RATIO 27 Q5-3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 28 Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 29 Q5-F3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 30 Q5-F4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 31 Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING, 4:1 SHRINK RATIO 32 Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 33 QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING, HOT MELT ADHESIVE-LINED, 6:1 SHRINK RATIO 34 QBTM 24kV BUS BAR INSULATION TUBING, HALOGEN FREE 35 QBTH 36kV BUS BAR INSULATION TUBING, HALOGEN FREE 35 End Caps Page QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING 36 Mini Spools, Q Boxes, Qkits & Refi ll Bags Page MINI SPOOLS & Q BOXES 37 QKITS & REFILL BAGS 37-38 www.Qualtekusa.com INDEX Cable Ties & Accessories Page CABLE TIE INFORMATION 39 11 Series MARKER CABLE TIES , GENERAL PURPOSE 40 12 Series DOUBLE LOOP CABLE TIES, GENERAL PURPOSE 41 13 Series NYLON, BEADED CABLE TIES, GENERAL PURPOSE 42 14 Series NYLON, DOUBLE LOOP BEADED CABLE TIES , GENERAL PURPOSE, 43 15 Series CABLE TIES RUBBER ADHESIVE MOUNTING BASE, GENERAL PURPOSE 44 16 Series NYLON, CABLE TIES SCREW MOUNT BASE, GENERAL PURPOSE 45 17 Series STANDARD NYLON CABLE TIES, GENERAL PURPOSE 46-47 18 Series NYLON, MOUNTING HOLE CABLE TIES, GENERAL PURPOSE 48 19 Series NYLON, RELEASABLE PAWL TYPE CABLE TIES, GENERAL PURPOSE 49 20 Series NYLON, RELEASABLE TRIGGER TYPE CABLE TIES, GENERAL PURPOSE 50 21 Series NYLON, PUSH MOUNT CABLE TIES, GENERAL PURPOSE 51 22 Series STAINLESS STEEL CABLE TIES, SELF-LOCKING BALL LOCK HEAD DESIGN 52 www.Qualtekusa.com HEAT SHRINK PRODUCTS SELECTION GUIDE HEAT SHRINK THIN WALL TUBING Min. Full Operating Temp. Part Number Material Product Type Shrink Ratio Shrink Recovery & Voltage Rating Temp. Temp. Q2-CB Polyolefi n Ultra Thin Wall 2:1 -55°C to +125°C, 300V 70°C 100°C Q2-F Polyolefi n Thin Wall 2:1 -55°C to +135°C, 600V 70°C 100°C Q2-F3X Polyolefi n Thin Wall 3:1 -55°C to +135°C, 600V 70°C 100°C Q2-F4X Polyolefi n Thin Wall 4:1 -55°C to +135°C, 600V 70°C 100°C Q2-F2XYG Polyolefi n Thin Wall 2:1, 3:1 -55°C to +135°C, 600V 70°C 100°C Q2-F3XYG Q2-HF Polyolefi n Thin Wall 2:1 -55°C to +105°C, 600V 70°C 100°C Q2-LS Polyolefi n Thin Wall 2:1 -55°C to +125°C, 600V 65°C 95°C Q2-R Polyolefi n Semi-Rigid Thin Wall 2:1 -55°C to +135°C, 600V 70°C 130°C Q2-Z Polyolefi n Thin Wall 2:1 -55°C to +125°C, 600V 70°C 100°C Q2-3X Polyolefi n Thin Wall 3:1 -55°C to +125°C, 600V 70°C 100°C Q-150K Modifi ed PVDF Flexible Thin Wall 2:1 -55°C to +150°C, 600V 135°C 150°C Q-175K PVDF Semi-Rigid Thin Wall 2:1 -55°C to +175°C, 600V - 175°C Modifi ed Q-200E Fluoroelastomer Very Flexible Thin Wall 2:1 -55°C to +200°C, 600V 150°C 175°C Viton QPTFE Modifi ed PTFE Semi-Rigid Thin Wall 2:1 -65°C to +260°C, 600V - 350°C HEAT SHRINK MEDIUM / HEAVY WALL TUBING - ADHESIVE LINED Min. Full Operating Temp. Part Number Material Product Type Shrink Ratio Shrink Recovery & Voltage Rating Temp. Temp. Q5-2X Polyolefi n Dual Wall 2:1 -45°C to +125°C, 600V 100°C 125°C Q5-3X Polyolefi n Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C Q5-4X Polyolefi n Dual Wall 4:1 -55°C to +125°C, 600V 80°C 110°C Q5-F3X Polyolefi n Dual Wall 3:1 -55°C to +125°C, 600V 70°C 110°C Q5-F4X Polyolefi n Dual Wall 4:1 -55°C to +125°C, 600V 70°C 110°C Q5-4XR Polyolefi n Semi-Rigid Dual Wall 4:1 -55°C to +125°C, 600V 110°C 135°C Q5-3XM Polyolefi n Heavy Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C QRA-6X Polyolefi n Heavy Dual Wall 6:1 -55°C to +110°C, 600V 120°C 120°C QBTM Non-Halogen Bus Bar - -55°C to +105°C, 24-36kV 120°C - QBTH Polymer END CAPS Min. Full Operating Temp. Part Number Material Product Type Shrink Ratio Shrink Recovery & Voltage Rating Temp. Temp. QSEC Polyolefi n Cable End Caps - -55°C to +110°C, 1000V 120°C - SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS www.Qualtekusa.com 1 Military Agency Standard General Description Page Certifi cation SAE-AMS-DTL No PBB’s, PBBE’s, PBBO’s, Low Cadmium and Lead, VW-1 E236137 - 13 mm Sizes: 1.0 to 10mm, Inch Sizes: 3/64” to 1/2” 242540 No PBB’s, PBBE’s, PBBO’s, Very Flexible, Highly Flame-Retardant, VW-1 E236137 23053/5 14 mm Sizes: 1.2 to 151mm, Inch Sizes: 3/64” to 6” 242540 Class 1 & 3 No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1 E236137 23053/5 15 mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” 242540 Class 1 & 3 No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant E236137 23053/5 16 mm Sizes: 19.1 to 115mm, Inch Sizes: 3/4” to 4 1/2” 242540 Class 1 & 3 Yellow-Green Striped, Flexible, Flame-Retardant Tubing, VW-1 E236137 23053/5 17 2:1 - mm Sizes: 1.2 to 101.6mm, Inch Sizes: 3/64” to 4”, 3:1 - mm Sizes: 1.6 to 39mm, Inch Sizes: 1/16” to 1 1/2” 242540 Class 1 & 3 Halogen Free Polyolefi n Tubing, Low Smoke 242540 - 18 mm Sizes: 1.0 to 150mm Very Flexible, Low Shrink Temperature, Halogen Free Polyolefi n Tubing 242540 - 19 mm Sizes: 1.6 to 50.8mm, Inch Sizes: 1/16” to 2” Semi-Rigid, Flame-Retardant Tubing, Resistant to Common Chemicals and Solvents, Self-Extinguish in 30 Seconds E236137 23053/6 20 mm Sizes: 1.2 to 25.4mm, Inch Sizes: 3/64” to 1” 242540 Class 1 & 2 Environment Friendly, Flexible, Flame-Retardant, VW-1 E236137 - 21 mm Sizes: 1.0 to 150mm, Inch Sizes: 3/64” to 6” 242540 Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1 E236137 - 22 mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” 242540 Flexible, High Temperature, Chemical Resistant, Polyvinylidene Fluoride(PVDF) Kynar®, VW-1 VW-1 23053/18 23 mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” E245010 Clear, High Temperature, Chemical Resistant, Polyvinylidene Fluoride (PVDF) Kynar®, VW-1 VW-1 23053/18 24 mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” E245010 Flexible, Elastic, High Temperature, Solvent Resistant, Viton®, VW-1 VW-1 mm Sizes: 3.2-50.8mm, Inch Sizes: 1/8” to 2” 23053/13 25 E245010 Polytetrafl uoroethylene Tubing, Self-Extinguish - 23053/12 26 Sizes: AWG 30 to AWG 0 Military Agency Standard General Description Page Certifi cation SAE-AMS-DTL Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds E236137 23053/4 27 mm Sizes: 3.2 to 38.1mm, Inch Sizes: 1/8” to 1 1/2” 242540 Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds E236137 23053/4 28 mm Sizes: 3.0 to 50.0mm, Inch Sizes: 1/8” to 2” 242540 Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds E236137 23053/4 29 mm Sizes: 4.0 to 52.0mm, Inch Sizes: 3/16” to 2” 242540 Adhesive-Lined, Flexible, Polyolefi n Tubing, Self-Extinguish in 30 Seconds E236137 23053/4 30 mm Sizes: 3.0 to 40mm, Inch Sizes: 1/8” to 1 1/2” 242540 High Shrink Ratio, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds E236137 23053/4 31 mm Sizes: 4 to 52mm, Inch Sizes: 3/16” to 2” 242540 High Shrink Ratio, Semi-Rigid, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds - 23053/4 32 mm Sizes: 6.0 to 18.0mm, Inch Sizes: 0.236” to 0.708” Heavy Dual Wall, High Shrink Ratio, Adhesive-Lined, Flame-Retardant, Self-Extinguish in 30 Seconds -- 33 mm Sizes: 19.0 to 100.0mm, Inch Sizes: 3/4” to 4” Very High Shrink Ratio, Heavy Dual Wall, Hot-Melt, Adhesive-Lined -- 34 mm Sizes: 19.0 to 235mm Specially formulated radiation cross-linked halogen free compounds. High resistance to tracking and arcing. UV and weather resistant -- 35 mm Sizes: 15.0 to 235mm General Description Page Spiral Hot-Melt Adhesive Coated End Cap for Protecting Cable Ends from the Environmental Eff ects. 36 mm Sizes: 12 to 200mm 37-38 www.Qualtekusa.com 2 HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE Qualtek PN Page Raychem Sumitomo Canusa 3M Alpha Insul Tab LG Q2-CB 13 VERSAFIT V4 F3(Z) Deray ITW GSHS-1625G Q2-F 14 RNF-100, VERSAFIT B2, B2(Z), F, F2, F2(Z) CPX100, CPX-876 FP-301 FIT 221, FIT 221V HS-101 GSHS-1635F Q2-F3X 15 RNF-3000 B2(3X), F2(3X),A2(3X) CPX300, Deray-I 3000 SFTW-203 FIT 321V HS101 SR GSHS-3635 Q2-F4X 16 RP-4800 W3B2(4X) FIT 421 Q2-F2XYG 17 DCPT 2:1 B2(Y/G) Deray IGY, CPX-201 SFTW-202GYS FIT 260 GSHS-1635Y/G Q2-F3XYG 17 DCPT 3:1 Deray IGY, CPX-201 HS-101(3X) Q2-HF 18 ZHTM SUMITUBE-NH CZT-200 Q2-LS 19 LSTT Deray LSB Q2-R 20 CRN, RT-3 B8 CHM 140 SR350 FIT 295 HS-101-SR Q2-Z 21 VERSAFIT V2 F2(Z) Deray H CP-221 GSHS-1625G Q2-3X 22 VERSAFIT 3X F2(3X), B2(3X) HS101SR Q-150K 23 RT 375, RNF-150 K2 THV-150 BLACK FIT 221VC GSHS-1650F Q-175K 24 KYNAR, RW-175 K CKN-175, Deray KY 175 KYNAR FIT 350 HSK-600 GSHS-1675 Q-200E 25 VITON FE3 Deray VT220 VITON FIT 650 HSN-VTN Q-PTFE 26 TFE Deray PTFE QDR - DR-25 Deray V25 QDR-TW - DR-25-TW Deray V25TW Q5-2X 27 TAT-125 02B2 EPS-200 FIT 750 HS-101-MV 2:1 GSHS-1625W Q5-3X 28 DWP-125 W3B2 CPA 300 EPS-300 FIT 321 HS-101-MW 3:1 GSHS-3635W Q5-4X 29 ATUM 4:1 W3B2 EPS-400 HS-101-MW 4:1 GSHS-4635W Q5-F3X 30 ATUM 3:1 W3B2(4X) Deray IAKT 3:1 EPS-300 FIT 321 HS-101-MW 3:1 GSHS-3635W Q5-F4X 31 ATUM 4:1 Deray IAKT 4:1 EPS-400 HS-101-MW4:1 GSHS-4635W Q5-4XR 32 ES-2000 SA2 Deray Splicemelt EPS-400, SMS FIT 421 GSHS-4635WS Q5-3XM 33 SST ITCSN, MDT FIT 700 Q5-2000 - AP-2000 O2 GSHS-2690NW QRA2 - MWTM CFM IMCSN, MDT LG-PMWT QRA3 - WCSM, SST CFW FIT 700 LG-PHWT QFRA3 - BSTSFR, SSTFR FCFW HDT, ITCSF QRA-6X 34 CFHR FIT 321 QBTM 35 BPTM CBTM BBI QBTH 35 BBIT CBTH QRS - PLA QSTV - TCS2 CFTV CCT CTV LG-CATV QAT - HVTM CNTT QBM - BBIT CBTH BBI LG-BBVH QBT - BPTM CBTM BBI QSCT - HSCT QSC-100 - SCR-100 CSCR QSEC 36 SSC, ESC CCAP, CEC ICEC FIT CAP Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 3 CABLE TIES CROSS REFERENCE GUIDE Catamount Hellermann Avery Thomas & Qualtek PN Page Panduit Ideal Ind. Richco 3M T&B Betts Tyton Dennison 11-M100B-C 40 TY551MX PLM1M-C0 IT18R0C2 11-M100N-C 40 L-4-18ID-9-C TY551M PL1M-C IT1MID-C IT18R9C2 08417 WIT-F1-18R-M 11-M110B-C 40 TY553MX PLF1M-C0 IT18FL0C2 TY153M, 11-M110N-C 40 PLF1M-C IT18FL9C2 10687 WIT-F2-18R-M TY553M 11-M200B-C 40 TY5512MX PLM2M-M0 10426 11-M200N-C 40 TY5512M PL2M-C 10427 11-S190B-C 40 TY546MX PLM2S-C0 11-S190N-C 40 L-7-50ID-9-C TY546M PLM2S-C IT2SID-C 12-S200B-C 41 T50RDH0C2 12-S200N-C 41 TB-50RLDH T50RDH9C2 12-S300B-C 41 T50IDH0C2 10432 12-S300N-C 41 TB-12-50RLDH T50IDH9C2 10430 13-100B-C 42 BT-4-01-NT 13-100N-C 42 BT-4-01-BK 13-150B-C 42 BT-6-01-NT 13-150N-C 42 BT-6-01-BK 13-200B-C 42 BT-8-01-NT 13-200N-C 42 BT-8-01-BK FTH-5A1-RT-UVB, 15-1919B-C 44 MPNY-750-0-C IT750MP-C0 CTB75X75BKA-C FTH-5A1-01-UVB FTH-5A1-RT, 15-1919N-C 44 MPNY-750-9-C TC5344A ABMM-A-C IT750MP-C 10029 CTB75X75NTA-C FTH-5A1-01 FTH-7A1-RT-UVB, 15-2525B-C 44 MPNY-1000-0- C IT1000MP-C0 CTB1X1BKA-C FTH-7A1-01-UVB ABM2S-A-C, 10030, FTH-7A1-RT, 15-2525N-C 44 MPNY-1000-9-C TC5345A IT1000MP-C CTB1X1NTA-C ABM112-A-C 08463 FTH-7A1-01 15-4040B-C 44 FTH-4040B-C 15-4040N-C 44 TC150X150A-L ABM3H-A-L FTH-8-01 16-1509B-C 45 IT1SMB-C0 16-1509N-C 45 SMNY-000-9-D IT1SMB-C 10044 16-1712N-C 45 10045 16-2216B-C 45 IT2SMB-C0 16-2216N-C 45 SMNY-002-9-D IT2SMB-C 16-2516N-C 45 10046 17-EHD1220B-L 47 L-48-175-0-L TY54513MX PLT13H-Q0 IT14H-L0 T150XL0X2 CT48BK175-L 17-EHD1220N-L 47 L-48-175-9-L TY54513M PLT13H-Q IT14H-L T150XL9X2 CT48NT175-L 17-EHD400B-L 47 T150R0X2 17-EHD400N-C 47 WIT-175S-C 17-EHD400N-L 47 T150R9X2 17-EHD450B-L 47 PLT5H-L0 17-EHD450N-L 47 PLT5H-L 17-EHD550B-L 47 PLT6H-L0 T150M0X2 17-EHD550N-L 47 PLT6H-L T150M9X2 17-EHD610B-L 47 L-24-175-0-L CT24BK175-L 17-EHD610N-C 47 WIT-175R-C 17-EHD610N-L 47 L-24-175-9-L CT24NT175-L 17-EHD750B-L 47 IT7H-L0 17-EHD750N-L 47 IT7H-L 17-EHD780B-L 47 PLT8H-L0 17-EHD780N-L 47 PLT8H-L 17-EHD810B-L 47 T150L0X2 17-EHD810N-C 47 WIT-175L-C 17-EHD810N-L 47 T150L9X2 17-EHD920B-L 47 L-36-175-0-L TY53510MX T150LL0X2 CT36BK175-L 17-EHD920N-L 47 L-36-175-9-L TY53510M T150LL9X2 CT36NT175-L 17-HD200B-C 46 L-8-120-0-C PLT2H-L0 CT8BK120-L Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 4 CABLE TIES CROSS REFERENCE GUIDE Hellermann Catamount Thomas & Avery Qualtek PN Page Panduit Ideal Ind. Richco 3M T&B Betts Tyton Dennison 17-HD200N-C 46 L-8-120-9-C PLT2H-L CT8NT120-L 17-HD220B-C 46 TY5272MX T120S0K2 17-HD220N-C 46 TY5272M T120S9K2 WIT-120S-C 17-HD250B-C 46 PLT2.5H-L0 17-HD250N-C 46 PLT2.5H-L 17-HD300B-C 46 L-100-120-0-C PLT3H-L0 T120I0K2 17-HD300N-C 46 L-100-120-9-C PLT3H-L T120I9K2 17-HD350B-C 46 TY527MX 17-HD350N-C 46 TY527M 17-HD365B-C 46 L-14-120-0-C 10039 17-HD365N-C 46 L-14-120-9-C 10038 17-HD380B-C 46 PLT4H-L0 IT4LH-L0 T120R0K2 CT15BK120-C 17-HD380N-C 46 PLT4H-L IT4LH-L T120R9K2 WIT-120R-C CT15NT120-C 17-HD450B-C 46 TY5275MX IT5LH-L0 17-HD450B-L 46 L-18-120-9-L 17-HD450N-C 46 TY5275M IT5LH-L 17-HD450N-L 46 L-18-120-9-L 17-HD540B-L 46 10608 17-HD540N-C 46 WIT-120L-C 17-HD540N-L 46 10606 17-HD550B-L 46 PLT6LH-L0 10620 17-HD550N-L 46 PLT6LH-L 10618 TY529MX, 17-HD750B-C 46 TY5277MX 17-HD750B-L 46 L-28-120-0-L PLT9LH-L0 T120L0K2 TY529M, 17-HD750N-C 46 TY5277M 17-HD750N-L 46 L-28-120-9-L PLT9LH-L T120L9K2 T250XL9X2, 17-HSD1000N-L 47 T250XL0X2 17-HSD530B-L 47 T250R0X2 17-HSD530N-L 47 T250R9X2 17-HSD650B-L 47 IT6EH-C0 T250M0X2 17-HSD650N-L 47 T250M9X2 17-I140B-C 46 L-5-30-0-C TY524MX PLT1.5I-C0 CT6BK40-C 17-I140B-M 46 L-5-30-0-M TY24MX PLT1.5I-M0 CT6BK40-M 17-I140N-C 46 L-5-30-9-C TY524M PLT1.5I-C CT6NT40-C 17-I140N-M 46 L-5-30-9-M TY24M PLT1.5I-M CT6NT40-M 17-I150B-C 46 IT1_5I-C0 17-I150B-M 46 IT1_5I-M0 17-I150N-C 46 IT1_5I-C WIT-40R-C 17-I150N-M 46 IT1_5I-M WIT-40R-M 17-I200B-C 46 L-8-40-0-C TY5242MX PLT21-C0 T40R0C2 08386 17-I200B-M 46 L-8-40-0-M TY242MX PLT21-M0 T40R0M4 08380 WIT-40L-C, 17-I200N-C 46 L-8-40-9-C TY5242M PLT21-C T40R9C2 08385 WIT-40XL-C 17-I200N-M WIT-40L-M, 46 L-8-40-9-M TY242M PLT21M T40R9M4 08377 WIT-40XL-M 17-I250B-C 46 PLT2.5I-C0 CT8BK40-C 17-I250B-M 46 PLT2.5I-M0 CT8BK40-M 17-I250N-C 46 PLT2.5I-C CT8NT40-C 17-I250N-M 46 PLT2.5I-M CT8NT40-M 17-I280B-C 46 TY526MX WIT-40VL-UVB-C 17-I280B-M 46 TY26MX WIT-40VL-UVB-M 17-I280N-C 46 TY526M WIT-40VL-C 17-I280N-M 46 TY26M WIT-40VL-M 17-I300B-C 46 L-11-40-0-C PLT31-C0 IT31-C0 T40I0C2 17-I300B-M 46 L-11-40-0-M PLT31-M0 T40I0M4 Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 5 CABLE TIES CROSS REFERENCE GUIDE Catamount Hellermann Avery Thomas & Qualtek PN Page Panduit Ideal Ind. Richco 3M T&B Betts Tyton Dennison 17-I300N-C 46 L-11-40-9-C PLT31-C IT31-C T40I9C2 17-I300N-M 46 L-11-40-9-M PLT31-M T40I9M4 17-I370B-C 46 L-14-40-0-C TY5244MX PLT41-C0 T40L0C2 17-I370B-M 46 L-14-40-0-M TY244MX PLT41-M0 M40L0M4 17-I370N-C 46 L-14-40-9-C TY5244M PLT41-C T40L9C2 17-I370N-M 46 L-14-40-9-M TY244M PLT41-M T40L9M4 17-M100B-C 46 L-4-18-0-C TY523MX PLT1M-C0 IT1M-C0 T18R0C2 08435 CT4BK18-C 17-M100B-M 46 L-4-18-0-M TY23MX PLT1M-M0 IT1M-M0 T18R0M4 08433 CT4BK18-M 17-M100N-C 46 L-4-18-9-C TY523M PLT1M-C IT1M-C T18R9C2 08434 CT4NT18-C 17-M100N-M 46 L-4-18-9-M TY23M PLT1M-M IT1M-M T18R9M4 08432 CT4NT18-M 17-M120B-C 46 WIT-18R-UVB-C 17-M120B-M 46 WIT-18R-UVB-M 17-M120N-C 46 WIT-18R-C 17-M120N-M 46 WIT-18R-M 17-M150B-C 46 PLT1.5M-C0 T18I0C2 WIT-18L-UVB-C CT6BK18-C 17-M150B-M 46 PLT1.5M-M0 T18I0M4 WIT-18L-UVB-M 17-M150N-C 46 PLT1.5M-C T18I9C2 WIT-18L-C CT6NT18-C 17-M150N-M 46 PLT1.5M-M T18I9M4 WIT-18L-M 17-M160B-C 46 L-6-18-0-C CT6NT18-M 17-M160B-M 46 L-6-18-0-M 17-M160N-C 46 L-6-18-9-C 17-M160N-M 46 L-6-18-9-M TY5232MX, 17-M200B-C 46 L-8-18-0-C PLT2M-C0 IT2M-C0 T18L0C2 WIT-18V-UVB-C CT8BK18-C TY52315MX TY232MX, 17-M200B-M 46 L-8-18-0-M PLT2M-M0 IT2M-M0 T18L0M4 WIT-18V-UVB-M CT8BK18-M TYB2315MX TY5232M, 17-M200N-C 46 L-8-18-9-C PLT2M-C IT2M-C T18L9C2 WIT-18V-C CT8NT18-C TY52315M TY5232M, 17-M200N-M 46 L-8-18-9-M PLT2M-M IT2M-M T18L9M4 WIT-18V-M CT8NT18-M TYB2315M 17-M80B-C 46 PLT.7M-C0 T18S0C2 WIT-18SF-UVB-C 17-M80B-M 46 PLT.7M-M0 T18S0M4 WIT-18SF-UVB-M 17-M80N-C 46 PLT.7M-C T18S9C2 WIT-18SF-C 17-M80N-M 46 PLT.7M-M T18S9M4 WIT-18SF-M 17-S120B-C 46 PLT1S-C0 17-S120B-M 46 PLT1S-M0 17-S120N-C 46 PLT1S-C 17-S120N-M 46 PLT1S-M 17-S160B-C 46 L-5-50-0-C PLT1.5S-C0 T50S0C2 17-S160B-M 46 L-5-50-0-M PLT1.5S-M0 T50S0M4 17-S160N-C 46 L-5-50-9-C PLT1.5S-C T50S9C2 WIT-50S-C 17-S160N-M 46 L-5-50-9-M PLT1.5S-M T50S9M4 WIT-50S-M 17-S190B-C 46 L-7-50-0-C TY525MX PLT2S-C0 IT2S-C0 08437 CT8BK50-C 17-S190B-M 46 L-7-50-0-M TY25MX PLT2S-M0 IT2S-M0 08388 CT8BK50-M 17-S190N-C 46 L-7-50-9-C TY525M PLT2S-C IT2S-C 08436 CT8NT50-C 17-S190N-M 46 L-7-50-9-M TY25M PLT2S-M IT2S-M 08387 CT8NT50-M 17-S200B-C 46 T50R0C2 17-S200B-M 46 T50R0M4 17-S200N-C 46 T50R9C2 WIT-50R-C 17-S200N-M 46 T50R9M4 WIT-50R-M 17-S250B-C 46 PLT2.5S-C0 17-S250B-M 46 PLT2.5S-M0 17-S250N-C 46 PLT2.5S-C 17-S250N-M 46 PLT2.5S-M 17-S280B-C 46 L-11-50-0-C IT3S-C0 08930 CT11BK50-C CT11BK50-D, 17-S280B-M 46 IT3S-D0 08286 CT11NT50-D Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 6 CABLE TIES CROSS REFERENCE GUIDE Hellermann Catamount Thomas & Avery Qualtek PN Page Panduit Ideal Ind. Richco 3M T&B Betts Tyton Dennison 17-S280N-C 46 L-11-50-9-C IT3S-C 08859 CT11NT50-C 17-S280N-M 46 IT3S-D 08600 17-S300B-C 46 TY5253MX PLT3S-C0 T50I0C2 17-S300B-M 46 TY253MX PLT3S-M0 T50I0M4 17-S300N-C 46 TY5253M PLT3S-C T50I9C2 17-S300N-M 46 TY253M PLT3S-M T510I9M4 17-S360B-C 46 L-14-50-0-C 17-S360N-C 46 L-14-50-9-C 17-S370B-C 46 TY528MX PLT4S-C0 IT4S-C0 CT15BK50-C 17-S370B-M 46 TY28MX PLT4S-M0 IT4S-D0 CT15BK50-D 17-S370N-C 46 TY528M PLT4S-C IT4S-C CT15NT50-C 17-S370N-M 46 TY28M PLT4S-M IT4S-D CT-15NT50-D 17-S380B-C 46 08428 17-S380B-M 46 10037 17-S380N-C 46 08427 17-S380N-M 46 10036 17-S390B-C 46 T50L0C2 17-S390B-M 46 T50L0M4 17-S390N-C 46 T50L9C2 WIT-50L-C 17-S390N-M 46 T50L9M4 WIT-50L-M 17-S400B-C 46 PLT4.5S-C0 17-S400B-M 46 PLT4.5S-M0 17-S400N-C 46 PLT4.5S-C 17-S400N-M 46 PLT4.5S-M 17-S430B-C 46 IT5S-C0 17-S430N-C 46 IT5S-C 17-S450B-C 46 PLT5S-C0 17-S450B-M 46 PLT5S-M0 17-S450N-C 46 PLT5S-C 17-S450N-M 46 PLT5S-M 18-HD305B-C 48 PLC2H-S25-L0 18-HD305N-C 48 PLC2H-S25-L 18-HD400B-C 48 L-14-120MH-0-C TY537MX PLC4H-S25-L0 T120MR0K2 10040 18-HD400N-C 48 L-14-120MH-9-C TY537M PLC4H-S25-L T120MR9K2 08426 CT15NT120S-L 18-I150B-C 48 L-5-30MH-0-C TY534MX PLC1.5I-S8-C0 T30MR0C2 18-I150N-C 48 L-5-30MH-9-C TY534M PLC1.5I-S8-C T30MR9C2 18-M110B-C 48 TY533MX PLC1M-S4-C0 T18MR0C2 18-M110N-C 48 TY533M PLC1M-S4-C T18MR9C2 18-S200B-C 48 L-7-50MH-0-C TY535MX PLC2S-S10-C0 IT2SMH-C0 08318 CT8BK50S-C 18-S200N-C 48 L-7-50MH-9-C TY535M PLC2S-S10-C IT2SMH-C 08484 CT8NT50S-C 18-S305B-C 48 L-11-50MH-0-C PLC3S-S10-C0 IT3SMH-C0 T50MI0C2 10354 18-S305N-C 48 L-11-50MH-9-C PLC3S-S10-C IT3SMH-C T50MI9C2 10350 18-S370B-C 48 L-14-50MH-0-C TY5354MX PLC4S-S10-C0 IT4SMH-C0 18-S370N-C 48 L-14-50MH-9-C TY5354M PLC4S-S10-C IT4SMH-C 19-S160B-C 49 PRT1.5S-C0 RT50S0C2 19-S160N-C 49 PRT1.5S-C RT50S9C2 WIT-50SR-C 19-S200B-C 49 PRT2S-C0 10366 19-S200N-C 49 PRT2S-C 10364 19-S305B-C 49 PRT3S-C0 10369 19-S305N-C 49 PRT3S-C 10370 19-S380B-C 49 PRT4S-C0 RT50LL0C2 19-S380N-C 49 PRT4S-C RT50LL9C2 20-S150B-C 50 L-5-50R-0-C REL50R0C2 20-S150N-C 50 L-5-50R-9-C REL50R9C2 20-S200B-C 50 L-8-50R-0-C Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 7 CABLE TIES CROSS REFERENCE GUIDE Hellermann Catamount Thomas & Avery Qualtek PN Page Panduit Ideal Ind. Richco 3M T&B Betts Tyton Dennison 20-S200N-C 50 L-8-50R-9-C 20-S250B-C 50 REL50L0C2 20-S250N-C 50 REL50L9C2 20-S300B-C 50 L-10-50R-0-C 20-S300N-C 50 L-10-50R-9-C 21A-M100B-C 51 WIT-18RA-UVB 21A-M100N-C 51 PLWP1M-C 126-00041 10690 WIT-18RA-01 21A-S130B-C 51 PLWP1S-C0 WIT-50SA-UVB 21A-S130N-C 51 PLWP1S-C WIT-50SA-01 21A-S200B-C 51 L-7-50PM-0-C TY538MX PLWP2S-C0 WIT-50RA-UVB 21A-S200N-C 51 L-7-50PM-9-C TY538M PLWP2S-C WIT-50RA-01 21A-S130N-C 51 21B-I155B-C 51 PLP1.5I-M0 126-00045 21B-I155N-C 51 TY554M PLP1.5I-C 126-00043 21B-S200B-C 51 PLP2S-M0 T50RSF0C2 08446 WIT-50RLA-3-UVB 21B-S200N-C 51 PLP2S-C T50RSF9C2 08439 WIT-50RLA-3 22-H200A-C 52 LS-7.9-200A MLT2LH-LP MBT8H-S 22-H200B-C 52 LS-7.9-200B MLT2LH-LP316 MBT8H 22-H200D-C 52 LS-7.9-200-C MLTFC2H-LP316 22-H360A-C 52 LS-7.9-360A MLT4LH-LP MBT14H-S 22-H360B-C 52 LS-7.9-360B MLT4LH-LP316 MBT14H 22-H360D-C 52 LS-7.9-360-C MLTFC4H-LP316 22-H520A-C 52 LS-7.9-520A MLT6LH-LP MBT20H-S 22-H520B-C 52 LS-7.9-520B MLT6LH-LP316 MBT20H 22-H520D-C 52 LS-7.9-520-C MLTFC6H-LP316 22-H680A-C 52 LS-7.9-680A MLT8LH-LP MBT27H-S 22-H680B-C 52 LS-7.9-680B MLT8LH-LP316 MBT27H 22-H680D-C 52 LS-7.9-680-C MLTFC8H-LP316 22-H840A-C 52 LS-7.9-840A MBT33H-S 22-H840B-C 52 LS-7.9-840B MBT33H 22-H840D-C 52 LS-7.9-840-C 22-S125A-C 52 MLT1S-CP MBT5S-S 22-S125B-C 52 MLT1S-CP316 MBT5S 22-S200A-C 52 LS-4.6-200A MLT2S-CP MBT8S-S 22-S200B-C 52 LS-4.6-200B MLT2S-CP316 MBT8S 22-S200D-C 52 LS-4.6-200-C 22-S260A-C 52 MLT2.7S-CP 22-S260B-C 52 MLT2.7S-CP316 22-S360A-C 52 LS-4.6-360A MBT14S-S 22-S360B-C 52 LS-4.6-360B MLT4S-CP MBT14S 22-S360D-C 52 LS-4.6-360-C MLT4S-CP316 22-S520A-C 52 LS-4.6-520A MLT6S-CP MBT20S-S 22-S520B-C 52 LS-4.6-520B MLT6S-CP316 MBT20S 22-S520D-C 52 LS-4.6-520-C 22-S680A-C 52 LS-4.6-680A MLT8S-CP MBT27S-S 22-S680B-C 52 LS-4.6-680B MLT8S-CP316 MBT27S 22-S680D-C 52 LS-4.6-680-C 22-S840A-C 52 LS-4.6-840A MLT10S-CP MBT33S-S 22-S840B-C 52 LS-4.6-840B MLT10S-CP316 MBT33S 22-S840D-C 52 LS-4.6-840-C Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 8 9 HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY Heat Shrink Applications White Goods Electronics Aviation Automotive Pipe Line Power Generation Wire Harness Military Marine Telecom Qualtek heat shrinkable products include Polyolefi n, Silicon, Tefl on, VitonKynarHalogen-Free, high temp, single wall, double wall and adhesive lined tubing with varying shrink ratio, colors and sizes. We also off er Military (MIL) specifi cation shrink tubing with varying ratios, colors and sizes. Qualtek's heat shrink tubing products are produced by cross-linking extruded polymer compounds which produces a shape memory eff ect and when heated can be recovered to its original shape. Heat Shrink Technology Compound With a strong background in the research and development of modifi ed polymer materials, we have developed a variety of chemical formulations for diff erent types of heat shrinkable products. Extrusion Equipped with 20 advanced extrusion lines, we are able to produce stable and homogeneous dimensions. Our advanced co-extrusion technology makes it possible to manufacture polyolefi n / hot melt adhesive dual wall and insulation / conductive multi-layer tubing. Irradiation There are three sets of specially designed electronic accelerators in-house to meet requirements of diff erent sizes and shapes of shrinkable products that assures proper crosslinking of the product. Expansion This important process is required to obtain fi nal forms and dimensions of heat shrink products. With our modern equipment and technology, we can accurately control the dimensions, longitudinal changes and eccentricity of the fi nal product. Packaging After completion of the production cycle and quality control checks, the product is packaged to meet market demands such as standard product or is processed to customer designs from cut-to-length pieces to special packaging requirements. www.Qualtekusa.com 10 TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS Tubing Features Selection Parameters Wide range of sizes: micro  up to very large  Size Large selection of colors Shrink Ratio Low shrink temperatures: down to 65°C Operating Temperature High temperature rating: up to 260°C Recovery Temperature Abrasion, moisture and chemical / solvent resistant Flammablilty Rating High shrink ratios: 2:1, 3:1, 4:1, & 6:1 Electrical Rating Halogen & PBB free with low lead & cadmium Certifi cations & Specifi cations Flexible types: super fl exible, fl exible, semi rigid & rigid Resistance to Solvents & Chemicals Single wall: ultra thin, very thin, thin, medium & heavy Flexibility Dual wall adhesive lined: thin, medium & heavy Mechanical Properties Packaging: large & small spools, cut-to-length, kits & bags Special compound formulations available upon request Installation Instructions Place the heat shrink tubing over the product to be covered. Heat the tubing evenly until the tube shrinks around the object or the tube is shrunk completely (according to shrink ratio). Dual wall shrink tubing with adhesive may require additional heating to melt the adhesive for accurate installation. Constantly move the heat source or product during installation. Avoid concentrating the heat source in one location on the heat shrink tubing. Maintain heat source temperature to achieve appropriate shrink ratio and prevent charring or burning. Recommended heat sources include: Hot air gun, oven, infrared heat source, or soft fl ame. Use adequate ventilation during and following installation. Stop heating immediately if charring or burning of tubing occurs to prevent injury to operator or product. Charring or burning of ceratin tubing can create hazardous fumes that can potentially cause eye, skin, nose and throat irritation. For additional information, please contact your supplier or Qualtek. www.Qualtekusa.com 11 HEAT SHRINK PRODUCTS PART NUMBER GUIDE PART NUMBER EXAMPLE: Q2-F-3/64-01-QB48IN-25 PART NUMBER EXAMPLE: X - X - X - X X - X (6) QUANTITY - QB (Q BAG) ONLY (5) LENGTH - SEE LIST BELOW (4) STANDARD PACKAGING CODES - SEE LIST BELOW (3) COLOR - SEE LIST BELOW (2) SIZE - SEE TABLE BELOW (1) TYPE - SEE SPEC SHEET(Q1, Q2-F, Q-150K, etc....) NOTE: Table below represents information on individual spec sheet HEAT SHRINK THIN WALL TUBING 4 1 Q2-F STANDARD PACKAGING CODES: ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 MS - MINI SPOOL + LENGTH (FT or M) Features/Applications Provides both commercial and military applications electrical insulation and protects QB - Q BAG (Polybag contains quantity specifi ed) in-line components, disconnect terminals and splices with its high strength and H[FHOOHQWUHVLOLHQFH%XQGOHVZLUHVIRUYHU\ÀH[LEOHOLJKWGXW\KDUQHVVHV,GHQWL¿HV or color-codes wires, cables, terminals and components. QX - Q BOX + LENGTH (FT or M) Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C RK - REFILL BAG Full recovery temperature: 100°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 SS - STANDARD SPOOL + LENGTH (FT or M) Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead Standard colors: Black, red, blue, yellow, green, white, clear (class 2) RoHS Compliant Technical Data Technical Data 5 Property Test Method Typical Data 3 Operating Temperature IEC 216 -55°C to +135°C ASTM D 2671 >14 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 600% LENGTH: COLOR CODES: Longitudinal Shrinkage UL 224 0 + 5% UL 224 < 30% Eccentricity 01 BLACK FT = FEET Heat Aging Tensile Strength 175°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % 02 CLEAR M = METERS Flammability VW-1 Pass Dielectric Strength ASTM D 150 >20kV / mm 03 WHITE IN = INCH Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 Volume Resistance ASTM D 876 >10 ŸFP Copper Stability UL 224 Pass 04 RED MM = MILLIMETERS UL 224 No Corrosion Copper Corrosion Product Dimensions 05 BLUE As Supplied After Recovered Standard Size (mm) (mm) Packaging 06 GREEN Cut to Mini Standard Box Length Pcs. Inside Inside Spool Spool Length Wall Thickness *(QB) Diameter Diameter 07 YELLOW Inch mm (min.) *(MS) *(SS) *(QX) Qty per bag (min.) (max.) (Feet) (Feet) (Feet) 6” 48” 3/64 1.2 1.2 0.6 0.40 100 1000 50 40 25 08 YELLOW / GREEN 1/16 1.6 1.6 0.8 0.40 100 1000 50 36 25 3/32 2.4 2.4 1.2 0.48 100 500 50 32 25 09 BROWN 1/8 3.2 3.2 1.6 0.48 100 500 50 28 25 3/16 4.8 4.8 2.4 0.48 100 500 30 24 25 1/4 6.4 6.4 3.2 0.56 100 500 30 20 25 10 ORANGE 5/16 8.0 8.0 4.0 0.62 100 250 30 18 24 3/8 9.5 9.5 4.8 0.62 100 250 30 16 25 1/2 12.7 12.7 6.4 0.62 100 200 15 14 5 11 ASSORTED COLORS 5/8 15.9 15.9 8.0 0.68 50 200 15 14 5 3/4 19.1 19.1 9.5 0.68 50 200 15 12 5 1 25.4 25.4 12.7 0.87 50 200 15 8 5 12 GRAY 1 1/4 31.8 31.8 15.9 1.00 50 100 - 8 5 1 1/2 38.1 38.1 19.1 1.00 50 100 - 5 5 2 50.8 50.8 25.4 1.10 50 100 - 3 5 3 76.2 76.2 38.1 1.20 - 100 - 2 2 4 102.0 102.0 50.8 1.35 - 100 - 1 2 5 125.0 125.0 63.5 1.40 - 50 - 1 2 6 151.0 151.0 75.0 1.40 - 50 - 1 2 Notes: 1. * See page 9 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request &OHDUWXELQJLVQRWÀDPHUHWDUGDQW8/RU&6$DSSURYHG 11 www.Qualtekusa.com SAMPLE TABLE: Q2-F 2 Product Dimensions As Supplied Standard After Recovered (mm) (mm) Packaging Cut to Size Mini Standard Length Pcs. Inside Box Length (inch) Inside Diameter Wall Thickness Spool Spool *(QB) Diameter *(QX) (max.) (min.) *(MS) *(SS) Qty per bag (max.) (Feet) (Feet) (Feet) 6 6” 48” 3/64 1.2 0.6 0.40 100 1000 50 40 25 1/16 1.6 0.8 0.40 100 1000 50 36 25 3/32 2.4 1.2 0.48 100 500 50 32 25 1/8 3.2 1.6 0.48 100 500 50 28 25 3/16 4.8 2.4 0.48 100 500 30 24 25 1/4 6.4 3.2 0.56 100 500 30 20 25 5/16 8.0 4.0 0.62 100 250 30 18 25 3/8 9.5 4.8 0.62 100 250 30 16 25 1/2 12.7 6.4 0.62 100 200 15 14 5 5/8 15.9 8.0 0.68 50 200 15 14 5 3/4 19.1 9.5 0.68 50 200 15 12 5 1 25.4 12.7 0.87 50 200 15 8 5 1 1/4 31.8 15.9 1.00 50 100 - 8 5 1 1/2 38.1 19.1 1.00 50 100 - 5 5 2 50.8 25.4 1.10 50 100 - 3 5 3 76.2 38.1 1.20 - 100 - 2 2 4 102.0 50.8 1.35 - 100 - 1 2 5 125.0 63.5 1.40 - 50 - 1 2 6 151.0 75.0 1.40 - 50 - 1 2 www.Qualtekusa.com 12 HEAT SHRINK THIN WALL TUBING Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Typically used where rapid shrinking and space saving is important. Low shrink temperature further reduces installation time and risk of dam- age to temperature sensitive components. Low heavy metal content and fl ame retardant formulation make this a product that meets global environmental standards. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 300V Meets: Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s Cadmium content: <5 ppm, Lead content: <30 ppm Standard color: Black Other colors are available upon request RoHS Compliant Technical Data Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 400% Longitudinal Shrinkage UL 224 0 + 5% Eccentricity ASTM D 2671 < 30% Heat Aging Tensile Strength 158°C, 168 hrs. > 350% Ultimate Elongation Flammability VW-1 Pass Dielectric Strength IEC 243 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC 2500V, 1 min. No Breakdown 14 Volume Resistance ASTM D 2671 > 10 .cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions Product Dimensions As As Supplied After Recovered After Recovered Standard Supplied (mm) (mm) Standard (mm) Packaging (mm) Size Spool (mm) Inside Wall *(SS) Inside Diameter Cut to Diameter Thickness (Meter) (min.) Size Length (max.) (min.) Mini Standard (Inch) Pcs. Inside Inside Wall Spool Spool 1.0 1.0 0.50 0.20 200 *(QB) Diameter Diameter Thickness *(MS) *SS Qty per (min.) (max.) (min.) 1.5 1.5 0.75 0.20 200 bag (Feet) (Feet) 2.0 2.0 1.00 0.20 200 6” 48” 2.5 2.5 1.25 0.25 200 3/64 1.2 0.60 0.20 100 1000 40 25 3.0 3.0 1.50 0.25 200 1/16 1.6 0.80 0.20 100 1000 36 25 3.5 3.5 1.75 0.25 200 3/32 2.4 1.20 0.25 100 500 32 25 4.0 4.0 2.00 0.25 200 1/8 3.2 1.60 0.25 100 500 28 25 5.0 5.0 2.50 0.28 100 3/16 4.8 2.40 0.25 100 500 24 25 6.0 6.0 3.00 0.28 100 1/4 6.4 3.20 0.28 100 500 20 25 7.0 7.0 3.50 0.28 100 3/8 9.5 4.80 0.28 100 250 16 25 8.0 8.0 4.00 0.28 100 1/2 12.7 6.40 0.28 100 200 14 5 Notes: 9.0 9.0 4.50 0.28 100 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 10.0 10.0 5.00 0.28 100 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. UL and CSA Approvals only for black color. www.Qualtekusa.com 13 HEAT SHRINK THIN WALL TUBING Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications Provides both commercial and military applications electrical insulation and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience. Bundles wires for very fl exible light-duty harnesses. Identifi es or color-codes wires, cables, terminals and components. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead Standard colors: Black, red, blue, yellow, green, white, clear (class 2) RoHS Compliant Technical Data Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +135°C ASTM D 2671 >14 MPa Tensile Strength ASTM D 2671 > 600% Ultimate Elongation UL 224 0 + 5% Longitudinal Shrinkage Eccentricity UL 224 < 30% Heat Aging Tensile Strength 175°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass Dielectric Strength ASTM D 150 >20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 876 >10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions As Supplied After Recovered Standard (mm) (mm) Packaging Size Cut to Mini Standard Box Length Pcs. Inside Inside Spool Spool Length Wall Thickness *(QB) Diameter Diameter *(MS) *(SS) *(QX) (min.) Inch mm Qty per bag (min.) (max.) (Feet) (Feet) (Feet) 6” 48” 3/64 1.2 1.2 0.6 0.40 100 1000 50 40 25 1/16 1.6 1.6 0.8 0.40 100 1000 50 36 25 3/32 2.4 2.4 1.2 0.48 100 500 50 32 25 1/8 3.2 3.2 1.6 0.48 100 500 50 28 25 3/16 4.8 4.8 2.4 0.48 100 500 30 24 25 1/4 6.4 6.4 3.2 0.56 100 500 30 20 25 5/16 8.0 8.0 4.0 0.62 100 250 30 18 24 3/8 9.5 9.5 4.8 0.62 100 250 30 16 25 1/2 12.7 12.7 6.4 0.62 100 200 15 14 5 5/8 15.9 15.9 8.0 0.68 50 200 15 14 5 3/4 19.1 19.1 9.5 0.68 50 200 15 12 5 1 25.4 25.4 12.7 0.87 50 200 15 8 5 1 1/4 31.8 31.8 15.9 1.00 50 100 - 8 5 1 1/2 38.1 38.1 19.1 1.00 50 100 - 5 5 2 50.8 50.8 25.4 1.10 50 100 - 3 5 3 76.2 76.2 38.1 1.20 - 100 - 2 2 4 102.0 102.0 50.8 1.35 - 100 - 1 2 5 125.0 125.0 63.5 1.40 - 50 - 1 2 6 151.0 151.0 75.0 1.40 - 50 - 1 2 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request 4. Clear tubing is not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 14 HEAT SHRINK THIN WALL TUBING Q2-F3X HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Outstanding physical, chemical and electrical properties make it a good choice for electrical insulation, bundling and marking. It also prevents corrosion plus provides mechanical protection. It’s 3:1 shrink ratio makes it suitable for applying to irregular and diffi cult shapes. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259, Standard color: Black Special Colors: Red, blue, yellow, green, clear (class 2) RoHS Compliant Technical Data Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +135°C ASTM D 2671 >14 MPa Tensile Strength ASTM D 2671 > 600% Ultimate Elongation UL 224 0 + 5% Longitudinal Shrinkage Eccentricity ASTM D 2671 < 35% Heat Aging Tensile Strength 175°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions After As Supplied Standard Recovered Size (mm) Packaging (mm) Cut to Standard Length Pcs. Spool Inside Diameter Inside Diameter Wall Thickness *(QB) *(SS) (min.) (max.) (min.) Qty per bag Inch mm (Feet) 6” 48” 1/16 1.5/0.5 1.6 0.5 0.45 500 28 25 1/8 3.0/1.0 3.2 1.0 0.55 500 24 25 3/16 4.5/1.5 4.8 1.5 0.60 500 24 25 1/4 6.0/2.0 6.4 2.0 0.65 250 20 25 3/8 9.0/3.0 9.5 3.0 0.75 250 16 25 1/2 12.0/4.0 12.7 4.0 0.80 150 14 5 3/4 18.0/6.0 19.1 6.0 0.90 150 12 5 1 24.0/8.0 25.4 8.0 1.20 150 8 5 1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 15 HEAT SHRINK THIN WALL TUBING Q2-F4X HIGH SHRINK RATIO, HIGHLY FLEXIBLE FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Manufactured with specially developed formulation and technology, it can easily fi t over a large diameter connector or transition and shrink down onto a smaller diameter jacket. Because of its outstanding physical, chemical and electrical properties it’s widely used in some important fi elds such as military, aerospace and fi ne electronic instruments for insulating or repairing harnesses, cables and connectors. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approval: File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Standard color: Black Special colors: Red, blue, yellow, green UV Resistant RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >14 MPa ASTM D 2671 > 600% Ultimate Elongation UL 224 0 + 5% Longitudinal Shrinkage Eccentricity ASTM D 2671 < 35% Heat Aging Tensile Strength 175°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 > 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied After Recovered Standard Size (mm) (mm) Packaging Cut to Length Pcs. Inside Inside *(QB) Wall Thickness Inch mm Diameter Diameter Qty per bag (min.) (min.) (max.) 6” 48” 3/4 19.1/4.6 19.1 4.6 1.7 12 25 1 25.4/7.0 25.4 7.0 1.7 8 25 1 1/2 38.1/9.5 38.1 9.5 1.7 5 25 2 50.8/14.0 50.8 14.0 1.7 3 25 3 76.2/20.6 76.2 20.6 1.7 2 25 4 102.0/26.7 102.0 26.7 1.7 1 5 4 1/2 115.0/36.8 115.0 36.8 1.7 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 16 HEAT SHRINK THIN WALL TUBING Q2-F2X(YG), Q2-F3X(YG) YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1 & 3:1 Features/Applications Dual color yellow and green striped polyolefi n tubing primarily used to identify “ground” wires. It is fl exible and fl ame retardant with permanent color properties, making it easy to install and identify. Used for light duty harnessing and ground wire identifi cation. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Standard color: Yellow & green striped RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +135°C ASTM D 2671 >14 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 600% UL 224 0 + 5% Longitudinal Shrinkage ASTM D 2671 < 35% Eccentricity Heat Aging Tensile Strength 175°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 Volume Resistance ASTM D 2671 >10 Ω.cm Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions (2:1) Q2-F2X(YG) Product Dimensions (3:1) Q2-F3X(YG) As Supplied After Recovered As Supplied After Recovered Standard Standard (mm) (mm) (mm) (mm) Size Spool Size Spool Inside Wall Inside Inside Wall (Inch) *(SS) (Inch) *(SS) Inside Diameter Diameter Thickness Diameter Diameter Thickness (min.) (Meter) (Meter) (max.) (min.) (min.) (max.) (min.) 3/64 1.2 0.6 .33 200 1/16 1.6/0.5 1.6 0.5 0.51 200 1/16 1.6 0.8 .36 200 3/32 2.4/0.8 2.4 0.8 0.51 200 3/32 2.4 1.2 .44 200 1/8 3.2/1.0 3.2 1.0 0.55 200 1/8 3.2 1.6 .44 200 3/16 4.8/1.5 4.8 1.5 0.60 100 3/16 4.8 2.4 .56 100 1/4 6.4/2.0 6.4 2.0 0.65 100 1/4 6.4 3.2 .56 100 3/8 9.5/3.0 9.5 3.0 0.75 100 5/16 8.0 4.0 .56 100 1/2 12.7/4.0 12.7 4.0 0.75 50 3/8 9.5 4.8 .56 100 3/4 19.1/6.0 19.1 6.0 0.85 50 1/2 12.7 6.4 .65 50 1 25.4/8.0 25.4 8.0 1.00 50 5/8 16.0 8.0 .69 50 3/4 19.1 9.5 .80 50 1 1/2 39/13.0 39.0 13.0 1.15 50 1 25.4 12.7 .90 50 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 1 1/4 31.8 15.9 .90 50 3. Special sizes, packaging, colors and cut pieces are available upon request. 2 1/2 38.1 19.1 1.02 50 2 50.8 25.4 1.02 50 3 76.2 38.1 1.20 30 4 101.6 50.8 1.30 30 www.Qualtekusa.com 17 HEAT SHRINK THIN WALL TUBING Q2-HF LOW SMOKE, HALOGEN FREE, FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications As a kind of totally environmental friendly heat-shrinkable tube, it is made with specially designed halogen free polyolefi n. It produces neither toxic smoke or harmful substance when burning, which meets the growing demand of environmental protection all over the world. In addition to the common fi ne physical and chemical specifi cations the tube also shows excellent fl ame-retardant, insulation, low temperature shrinking and fl exible properties and thus is widely used in electronics, communication and the auto industry. Operating temperature: -55°C to +105°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. 242540 Standard colors: Black, white Other colors are available upon request. RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +105°C ASTM D 2671 >12 MPa Tensile Strength ASTM D 2671 > 400% Ultimate Elongation Longitudinal Shrinkage UL 224 0 + 5% ASTM D 2671 < 30% Eccentricity Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 200 % Flammability VW-1 Self extinguish in 30 sec. ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions Product Dimensions As Supplied After Recovered As Supplied After Recovered Standard Standard (mm) (mm) (mm) (mm) Size Spool Size Spool Inside Wall Inside Wall (mm) *(SS) (mm) *(SS) Inside Diameter Inside Diameter Diameter Thickness Diameter Thickness (min.) (min.) (Meter) (Meter) (max.) (min.) (max.) (min.) 1.0 1.0 0.50 .33 200 15.0 15.0 7.50 0.69 50 1.5 1.5 0.75 .36 200 16.0 16.0 8.00 0.69 50 2.0 2.0 1.00 .44 200 18.0 18.0 9.00 0.80 50 2.5 2.5 1.25 .44 200 20.0 20.0 10.00 0.80 50 3.0 3.0 1.50 .44 200 22.0 22.0 11.00 0.80 50 3.5 3.5 1.75 .44 200 25.0 25.0 12.50 0.90 50 4.0 4.0 2.00 .44 200 28.0 28.0 14.00 0.90 50 5.0 5.0 2.50 .56 100 30.0 30.0 15.00 0.90 50 6.0 6.0 3.00 .56 100 35.0 35.0 17.50 0.90 50 7.0 7.0 3.50 .56 100 40.0 40.0 20.00 1.00 50 8.0 8.0 4.00 .56 100 50.0 50.0 25.00 1.00 50 9.0 9.0 4.50 .56 100 60.0 60.0 30.00 1.00 30 10.0 10.0 5.00 .56 100 70.0 70.0 35.00 1.20 30 11.0 11.0 5.50 .56 100 80.0 80.0 40.00 1.20 30 12.0 12.0 6.00 .56 50 100.0 100.0 50.00 1.30 30 13.0 13.0 6.50 .65 50 125.0 125.0 60.00 1.30 15 14.0 14.0 7.00 .69 50 150.0 150.0 75.00 1.30 15 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 18 HEAT SHRINK THIN WALL TUBING Q2-LS VERY LOW SHRINK TEMPERATURE, FLEXIBLE, HALOGEN FREE, POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Manufactured with modifi ed radiation cross-linked polyolefi n. This specially designed halogen free formulation makes the tubing very fl exible and shrinks at low temperature. Suitable for applications where heat sensitive components are used and quick shrinkage is required. The fl ammability of the tubing meets the automotive fl ame propagation standard FMVSS 302. Although very fl exible, it has good mechanical and electrical performance. Operating temperature: -55°C to +125°C Minimum shrink temperature: 65°C Full recovery temperature: 95°C Approvals: File No. 242540 Meets: SONY-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C ASTM D 2671 >12 MPa Tensile Strength ASTM D 2671 > 400% Ultimate Elongation Longitudinal Shrinkage UL 224 0 + 5% ASTM D 2671 < 30% Eccentricity Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 200 % Flammability FMVSS 302 Pass ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions After Recovered As Supplied (mm) Standard Packaging (mm) Cut to Length Size Standard Pcs. Inside Wall Mini Spool (Inch) Inside Diameter Spool (QB)* Diameter Thickness (MS)* (min.) (SS)* Qty per bag (max.) (min.) (Feet) (Feet) 6” 48” 1/16 1.6 0.8 0.5 100 1000 36 25 3/32 2.4 1.2 0.5 100 500 32 25 1/8 3.2 1.6 0.5 100 500 28 25 3/16 4.8 2.4 0.5 100 500 24 25 1/4 6.4 3.2 0.6 100 500 20 25 5/16 8.0 4.0 0.6 100 250 18 25 3/8 9.5 4.8 0.6 100 250 16 25 1/2 12.7 6.4 0.6 100 200 14 5 5/8 16.0 8.0 0.6 50 200 14 5 3/4 19.1 9.5 0.8 50 200 12 5 1 25.4 12.7 0.9 50 200 8 5 1 1/4 31.8 15.9 0.9 50 100 8 5 1 1/2 38.1 19.1 1.0 50 100 5 5 2 50.8 25.4 1.1 50 100 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. To ensure dimensional stability, Q2-LS should be stored at temperature below 40°C/104°F www.Qualtekusa.com 19 HEAT SHRINK THIN WALL TUBING Q2-R SEMI-RIGID, MULTI-PURPOSE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Outstanding physical, chemical and electrical properties. Widely used for insulation of harnesses and connectors in such fi elds as military, aerospace and fi ne electronic instruments. Resistant to common fl uids and solvents. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 130°C 4 Approvals : File No. E236137, File No. 242540,125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/6 Class 1 & 2, Sony SS-00259 Standard colors: Black, clear (Non-fl ame retardant) RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >16 MPa ASTM D 2671 > 500% Ultimate Elongation UL 224 0 + 5% Longitudinal Shrinkage ASTM D 2671 < 30% Eccentricity Heat Aging Tensile Strength 175°C, 168 hrs. > 12 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions After Recovered As Supplied (mm) Standard Packaging (mm) Cut to Size Standard Length Pcs. Inside Wall Mini Spool (Inch) Inside Diameter Spool *(QB) Diameter Thickness *(MS) (min.) *(SS) Qty per bag (max.) (min.) (Feet) (Feet) 6” 48” 3/64 1.2 0.6 0.4 100 500 40 25 1/16 1.6 0.8 0.4 100 500 36 25 3/32 2.4 1.2 0.5 100 500 32 25 1/8 3.2 1.6 0.5 100 500 28 25 3/16 4.8 2.4 0.5 100 250 24 25 1/4 6.4 3.2 0.6 100 250 20 25 3/8 9.5 4.8 0.6 100 250 16 25 1/2 12.7 6.4 0.6 100 150 14 5 5/8 16.0 8.0 0.7 50 150 14 5 3/4 19.1 9.5 0.7 50 150 12 5 1 25.4 12.7 0.9 50 150 8 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 20 HEAT SHRINK THIN WALL TUBING Q2-Z ENVIRONMENT FRIENDLY, FLEXIBLE FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications An environment friendly, fl ame retardant shrink tubing. Specially designed formulation to meet UL 224 and CSA 22.2 on the basis of no harmful substance such as PBB, PBBE, PBBO and toxic metal compounds. Widely used for insulation, strain relief, harnessing, bundling and color coding of wire with a low shrink temperature. Good fl exibility and superior mechanical strength in such fi elds as electronics, communication and automobile. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. E236137, File No. 242540, 125°C,VW-1, 600V Meets: Sony SS-00259, Material: No PBB’s, PBBO’s, PBBE’s Cadmium content <5 ppm, Lead content <10 ppm Standard colors: Black, red, blue, yellow, green, white Other colors are available upon request. RoHS Compliant Technical Data Product Dimensions As Supplied After Recovered Property Test Method Typical Data Standard (mm) (mm) Size Spool Operating Temperature UL 224 -55°C to +125°C Inside Wall (mm) *(SS) Inside Diameter Diameter Thickness Tensile Strength ASTM D 2671 > 14 MPa (min.) (Meter) (max.) (min.) Ultimate Elongation ASTM D 2671 > 400% 1.0 1.0 0.50 0.33 200 Longitudinal Shrinkage UL 224 0 + 5% 1.5 1.5 0.75 0.36 200 Eccentricity ASTM D 2671 < 30% 2.0 2.0 1.00 0.44 200 Heat Aging Tensile Strength 158°C, 168 hrs. > 12 MPa 2.5 2.5 1.25 0.44 200 Ultimate Elongation > 350% 3.0 3.0 1.50 0.44 200 Flammability VW-1 Pass 3.5 3.5 1.75 0.44 200 Voltage Withstand ASTM D 2671 / AC 2500, 1 min. No Breakdown 4.0 4.0 2.00 0.44 200 14 Volume Resistance IEC 93 > 10 .cm 5.0 5.0 2.50 0.56 100 Copper Stability UL 224 Pass 6.0 6.0 3.00 0.56 100 Copper Corrosion UL 224 No Corrosion 7.0 7.0 3.50 0.56 100 8.0 8.0 4.00 0.56 100 9.0 9.0 4.50 0.56 100 Product Dimensions 10.0 10.0 5.00 0.56 100 As Supplied After Recovered Standard Packaging 11.0 11.0 5.50 0.56 100 (mm) (mm) 12.0 12.0 6.00 0.56 50 Cut to Size Wall Mini Standard Box Length Pcs. 13.0 13.0 6.50 0.65 50 Inside Inside (Inch) Thick- Spool Spool Length *(QB) Diameter Diameter 14.0 14.0 7.00 0.69 50 ness *(MS) *(SS) *(QX) Qty per bag (min.) (max.) (min.) (Feet) (Feet) (Feet) 15.0 15.0 7.50 0.69 50 6” 48” 16.0 16.0 8.00 0.69 50 3/64 1.2 0.60 0.33 100 1000 50 40 25 18.0 18.0 9.00 0.80 50 1/16 1.6 0.80 0.36 100 1000 50 36 25 20.0 20.0 10.00 0.80 50 3/32 2.4 1.20 0.44 100 500 50 32 25 22.0 22.0 11.00 0.80 50 1/8 3.2 1.60 0.44 100 500 50 28 25 25.0 25.0 12.50 0.90 50 3/16 4.8 2.40 0.56 100 500 30 24 25 28.0 28.0 14.00 0.90 50 1/4 6.4 3.20 0.56 100 500 30 20 25 30.0 30.0 15.00 0.90 50 5/16 8.0 4.00 0.56 100 250 30 18 25 35.0 35.0 17.50 0.90 50 3/8 9.5 4.80 0.56 100 250 30 16 25 40.0 40.0 20.00 1.00 50 1/2 12.7 6.40 0.65 100 200 15 14 5 50.0 50.0 25.00 1.00 50 5/8 16.0 8.00 0.69 50 200 15 14 5 60.0 60.0 30.00 1.00 30 3/4 19.1 9.50 0.80 50 200 15 12 5 70.0 70.0 35.00 1.20 30 1 25.4 12.70 0.90 50 200 15 8 5 80.0 80.0 40.00 1.20 30 100.0 100.0 50.80 1.30 30 1 1/4 31.8 15.90 0.90 50 100 - 8 5 125.0 125.0 63.50 1.30 15 1 1/2 38.1 19.10 1.02 50 100 - 5 5 150.0 150.0 76.00 1.30 15 2 50.8 25.40 1.02 50 100 - 3 5 Notes: 3 76.2 38.10 1.20 - 100 - 2 2 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 4 101.6 50.80 1.30 - 100 - 1 2 3. Special sizes, packaging, colors and cut pieces are available upon request. 5 126.0 63.50 1.30 - 50 - 1 2 6 150.0 76.00 1.30 - 50 - 1 2 www.Qualtekusa.com 21 HEAT SHRINK THIN WALL TUBING Q2-3X FLEXIBLE, THIN WALL FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Widely used for electrical insulation. Protects in-line components, disconnect terminals and splices with its high strength and excellent resilience. Bundles wires for very fl exible light-duty harnesses. Identifi es or color-codes wires, cables, terminals and components. Free from environment harmful substances such as PBB’s, PBBO’s, PBBE’s and toxic heavy metal compounds in its components. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259 Standard colors: Black, red, blue, yellow, green, white, clear Other colors are available upon request. RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C ASTM D 2671 >14 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 400% UL 224 0 + 5% Longitudinal Shrinkage ASTM D 2671 < 30% Eccentricity Heat Aging Tensile Strength 158°C, 168 hrs. > 12 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass ASTM D 150 > 20kV / mm Dielectric Strength Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 Volume Resistance ASTM D 2671 10 Ω.cm Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Product Dimensions As Supplied After Recovered Standard Size (mm) (mm) Packaging Cut to Length Pcs. Standard Inside Inside *(QB) Wall Thickness Spool Inch mm Diameter Diameter Qty per bag (min.) *(SS) (min.) (max.) (Feet) 6” 48” 1/16 1.5/0.5 1.6 0.5 0.45 500 28 25 1/8 3.0/1.0 3.2 1.0 0.55 500 24 25 3/16 4.5/1.5 4.8 1.5 0.60 500 24 25 1/4 6.0/2.0 6.4 2.0 0.65 250 20 25 3/8 9.0/3.0 9.5 3.0 0.75 250 16 25 1/2 12.0/4.0 12.7 4.0 0.80 150 14 5 3/4 18.0/6.0 19.1 6.0 0.90 150 12 5 1 24.0/8.0 25.4 8.0 1.00 150 8 5 1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 22 HEA HEA TT SHRINK THIN W SHRINK THIN WALL TUBING ALL TUBING Qualtek Electronics Q-150K 150°C , BLACK, MODIFIED THIN WALL FLEXIBLE PVDF TUBING SHRINK RATIO 2:1 Features/Applications Excellent fl ame-retardant, heat shrinkable polyvinylidence fl uoride tubing for applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects solder joints, terminals and connectors from most industrial fl uids, solvents and chemicals. Operating temperature: -55°C to +150°C Minimum shrink temperature: 135°C Full recovery temperature: 150°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/18 Standard colors: Black, Clear RoHS Compliant Technical Data Property Test Method Typical Data ASTM D 2671 > 30 MPa Tensile Strength ASTM D 2671 > 150% Ultimate Elongation Flammability VW-1 Pass 14 IEC 93 >10 Ω.cm Volume Resistance Copper Stability 180°C, 168 hrs. Pass Copper Corrosion 180°C, 168 hrs. No Corrosion Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Tubing Cut to Length Pcs. Standard Inside Inside Wall *(QB) Shape Spool Inch mm Diameter Diameter Thickness Qty per bag *(SS) (min.) (max.) (min.) (Meter) Product Dimensions 6” 48” 3/64 1.2 1.2 0.6 0.26 Round 200 32 25 1/16 1.6 1.6 0.8 0.26 Round 200 28 25 3/32 2.4 2.4 1.2 0.26 Round 200 24 25 1/8 3.2 3.2 1.6 0.26 Round 100 20 25 3/16 4.8 4.8 2.4 0.26 Round 100 16 25 1/4 6.4 6.4 3.2 0.26 Round 100 12 25 3/8 9.5 9.5 4.8 0.30 Flat 50 8 25 1/2 12.7 12.7 6.4 0.30 Flat 50 4 5 3/4 19.1 19.1 9.5 0.41 Flat 50 2 5 1 25.4 25.4 12.7 0.41 Flat 50 1 5 1 1/2 38.1 38.1 19.0 0.51 Flat 50 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 23 HEAT SHRINK THIN WALL TUBING Q-175K 175°C , CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING SHRINK RATIO 2:1 Features/Applications Semi-rigid fl ame retardant heat shrinkable polyvinylidene fl uoride tubing for applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects wires, solder joints, terminals, connectors and components from most industrial fl uids, solvents and chemicals. Operating temperature: -55°C to +175°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/18 Standard color: Clear RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +175°C Tensile Strength ASTM D 2671 > 34.5 MPa Ultimate Elongation ASTM D 2671 > 150% Ultimate Elongation After Aging 250°C, 168 hrs. > 100% Heat Shock 300°C,1 hr. No cracking Cold Bend -55°C, 1 hr. No cracking Dielectric Strength ASTM D 2671 > 30 kV / mm 13 Volume Resistance IEC 93 > 10 .cm Flammability VW-1 Pass Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Pcs. Standard Inside Inside *(QB) Wall Thickness Spool Inch mm Diameter Diameter Qty per bag (min.) *(SS) (min.) (max.) (Meter) 6” 48” 3/64 1.2 1.2 0.6 0.20 200 32 25 1/16 1.6 1.6 0.8 0.20 200 28 25 3/32 2.4 2.4 1.2 0.23 200 24 25 1/8 3.2 3.2 1.6 0.23 200 20 25 3/16 4.8 4.8 2.4 0.23 100 16 25 1/4 6.4 6.4 3.2 0.28 100 12 25 3/8 9.5 9.5 4.8 0.28 - 8 25 1/2 12.7 12.7 6.4 0.28 - 4 5 3/4 19.1 19.1 9.5 0.36 - 2 5 1 25.4 25.4 12.7 0.41 - 1 5 1 1/2 38.1 38.1 19.0 0.51 - 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 24 HEAT SHRINK THIN WALL TUBING Q-200E 200°C, VERY FLEXIBLE MODIFIED FLUOROELASTOMER TUBING (Viton® ) SHRINK RATIO 2:1 Features/Applications Q-200E is made from modifi ed fl uoroelastomer with superior impact, abrasion and cut-through resistance. Used for applications requiring high resistance to corrosive fl uids, fuels, lubricants, acids and solvents at elevated temperatures. Very fl exible at high and low temperatures without cracking. Operating temperature: -55°C to +200°C Minimum shrink temperature: 150°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/13 Standard Color: Black RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +200°C Tensile Strength ASTM D 2671 > 8.5 MPa Elongation at Break ASTM D 2671 > 250% > 8MPa Elongation at Break After Aging 250°C, 168 hrs. > 200% Heat Shock 300°C, 4 hrs. No cracking or dropping Flexibility ASTM D 412 < 13.8 MPa Dielectric Strength ASTM D 2671 > 7.9kV / mm 14 Volume Resistance ASTM D 876 > 10 .cm Copper Corrosion UL 224 No corrosion Flammability ASTM D 2671 Self-extinguish in 15 sec. Product Dimensions As Supplied After Recovered Standard Size (mm) (mm) Packaging Tubing Cut to Length Pcs. Standard Inside Inside Wall *(QB) Shape Spool Inch mm Diameter Diameter Thickness Qty per bag *(SS) (min.) (max.) (min.) (Meter) 6” 48” 1/8 3.2 3.2 1.6 0.76 Round 50 20 25 3/16 4.8 4.8 2.4 0.90 Round 50 16 25 1/4 6.4 6.4 3.2 0.90 Round 50 12 25 3/8 9.5 9.5 4.8 0.90 Round 50 8 25 1/2 12.7 12.7 6.4 1.10 Round 30 4 5 3/4 19.1 19.1 9.5 1.30 Round 30 2 5 1 25.4 25.4 12.7 1.65 Flat 30 1 5 1 1/2 38.1 38.1 19.1 1.90 Flat 15 1 5 2 50.8 50.8 25.4 2.80 Flat 15 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Viton® is a registered trademark of E.I. Du Pont de Nemours and Co. Inc. www.Qualtekusa.com 25 HEAT SHRINK THIN WALL TUBING Q-PTFE PTFE HEAT SHRINKABLE TUBING Features/Applications Q-PTFE heat shrinkable tubing is manufactured with polytetrafl uoroethylene (PTFE). It is specially designed for applications where high temperature and chemical resistance is required. This tubing works great as an electrical insulator and where highly fl ame retardant properties are required, such as in the automotive, military and aerospace fi elds. Operating temperature: -65°C to +260°C Full recovery temperature: 350°C Meets: SAE-AMS-DTL-23053/12 Standard color: Clear RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 > 17.3 MPa Ultimate Elongation ASTM D 2671 > 200% Specifi c Gravity ASTM D 792 2.30 Heat Shock (400°C, 4hrs.) ASTM D 2671 No cracking or dropping Cold Bend Test (-65°C, 4hrs.) ASTM D 2671 No cracking 18 Volume Resistance ASTM D 2671 > 10 .cm Dielectric Strength ASTM D 2671 > 34kV/mm Copper Corrosion UL 224 Pass Flammability ASTM D 2671 Self-extinguish Fluid Resistance SAE-AMS-DTL-23053/12 Excellent Water Absorption ASTM D 570 < 0.1 Product Dimensions After Recovered Standard As Supplied (mm) (mm) Packaging Cut to Size Length Pcs. Inside Wall (AWG) Inside Diameter Diameter Thickness *(QB) (min.) (max.) (min.) Qty per bag (48” pcs.) 20 1.52 0.97 0.30 25 18 1.93 1.17 0.30 25 16 2.36 1.45 0.30 25 14 3.05 1.82 0.30 25 12 3.81 2.26 0.30 25 10 4.85 2.80 0.30 25 8 6.10 3.55 0.38 5 6 7.67 4.40 0.38 5 4 9.40 5.45 0.38 5 2 10.92 6.90 0.38 5 0 11.94 8.56 0.38 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 26 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-2X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefi n and hot-melt adhesive. Designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -45°C to +125°C Minimum shrink temperature: 100°C Full recovery temperature: 125°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear(non-fl ame retardant jacket) RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 10.4 MPa (min.) Tensile Strength After Aging ASTM D 2671 158°C, 168 hrs., remains 70% Elongation at Break ASTM D 2671 200% (min.) Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 100% (min.) Longitudinal Shrinkage UL 224 0 ± 10% Heat Shock 250°C, 4 hrs. No cracking, no dropping Cold Bend ( -30°C, 1 hr.) ASTM D 2671 No cracking Voltage Withstand (AC 2500V, 60 seconds) ASTM D 2671 No breakdown Break Down Voltage ASTM D 2671 AC 2500V (min.) 14 Volume Resistance ASTM D 876 Min. 10 .cm (min.) Flammability SAE-AMS-DTL-23053/4 Self extinguish in 30 seconds Copper Corrosion (158°C, 168 hrs.) UL 224 Pass Water Absorption ASTM D 570 < 0.5% Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Standard Pcs. Adhesive Inside Inside Total Wall Spool *(QB) Inch mm Diameter Diameter Thickness Thickness *(SS) Qty per bag (min.) (max.) (min.) (nom.) (Meter) 6” 48” 1/8 3.2/1.6 3.20 1.6 0.70 0.20 200 28 25 3/16 4.8/2.4 4.80 2.4 0.70 0.20 100 24 25 1/4 6.4/3.2 6.40 3.2 0.75 0.20 100 20 25 3/8 9.5/4.8 9.50 4.8 0.75 0.20 50 16 25 1/2 12.7/6.4 12.70 6.4 0.75 0.20 25 14 5 3/4 19.1/9.6 19.10 9.5 0.90 0.20 25 12 5 1 25.4/12.7 25.40 12.7 1.10 0.20 25 8 5 1 1/2 38.1/19.0 38.10 19.0 1.10 0.20 25 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear and color tubing other than black are not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 27 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefi n and hot-melt adhesive. It is designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery temperature: 110°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear(non-fl ame retardant jacket) RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C ASTM D 2671 >12 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% Longitudinal Shrinkage ASTM D 2671 < 40% Eccentricity Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 >10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Property of adhesive Ring-Ball Soft Point ASTM E28 95°C + 5°C Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Standard Pcs. Adhesive Inside Inside Total Wall Spool *(QB) Inch mm Diameter Diameter Thickness Thickness *(SS) Qty per bag (min.) (max.) (min.) (nom.) (Meter) 6” 48” 1/8 3.0/1.0 3.0 1.0 1.00 0.5 200 28 25 3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25 1/4 6.0/2.0 6.0 2.0 1.00 0.5 100 20 25 3/8 9.0/3.0 9.0 3.0 1.40 0.6 50 16 25 1/2 12.0/4.0 12.0 4.0 1.60 0.8 25 14 5 3/4 19.0/6.0 19.0 6.0 2.15 0.8 25 12 5 1 24.0/8.0 24.0 8.0 2.40 1.0 25 8 5 1 1/4 30.0/10.0 30.0 10.0 2.40 1.0 25 5 5 1 1/2 40.0/13.0 40.0 13.0 2.40 1.0 25 5 5 2 50.0/19.0 50.0 19.0 2.40 1.0 25 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 28 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefi n and hot-melt adhesive. Designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery temperature: 110°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C ASTM D 2671 >12 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% Longitudinal Shrinkage ASTM D 2671 < 40% Eccentricity Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 350 % Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 >10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Property of adhesive Ring-Ball Soft Point ASTM E28 95°C + 5°C Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Standard Pcs. Adhesive Inside Inside Total Wall Spool *(QB) Inch mm Diameter Diameter Thickness Thickness *(SS) Qty per bag (min.) (max.) (min.) (nom.) (Meter) 6” 48” 3/16 4/1 4.0 1.0 1.00 0.5 100 24 25 1/4 6/1.5 6.0 1.5 1.00 0.5 100 20 25 5/16 8/2 8.0 2.0 1.00 0.5 50 18 25 1/2 12/3 12.0 3.0 1.40 0.6 25 14 5 5/8 16/4 16.0 4.0 1.60 0.8 25 14 5 1 24/6 24.0 6.0 2.15 0.8 25 12 5 1 1/4 32/8 32.0 8.0 2.40 1.0 25 8 5 2 52/13 52.0 13.0 2.40 1.0 - 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 29 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-F3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Q5-F3X is manufactured by co-extrusion of polyolefi n and meltable adhesive. It is designed to provide insulation and create a tight seal for protected articles. Typical applications are environmental sealing of electrical components such as wire splices and harnesses in the automotive and communication industry. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 110°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >13 MPa ASTM D 2671 > 400% Ultimate Elongation UL 224 0 ± 10% Longitudinal Shrinkage Eccentricity ASTM D 2671 < 40% Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 300 % Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 > 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Property of adhesive ASTM E28 95°C + 5°C Ring-Ball Soft Point Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Standard Pcs. Adhesive Inside Inside Total Wall Spool *(QB) Inch mm Diameter Diameter Thickness Thickness *(SS) Qty per bag (min.) (max.) (min.) (nom.) (Meter) 6” 48” 1/8 3/1 3.0 1.0 1.00 0.5 200 28 25 3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25 1/4 6/2 6.0 2.0 1.00 0.5 100 20 25 3/8 9/3 9.0 3.0 1.40 0.6 50 16 25 1/2 12/4 12.0 4.0 1.60 0.8 25 14 5 3/4 19/6 19.0 6.0 2.15 0.8 25 12 5 1 24/8 24.0 8.0 2.40 1.0 25 8 5 1 1/2 40/13 40.0 13.0 2.40 1.0 25 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 30 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-F4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Q5-F4X is manufactured by co-extrusion of polyolefi n and meltable adhesive. It is designed to provide insulation and a tight seal for protected articles. Typical applications are environmental sealing of electrical components such as wire splices and harnesses in the automotive and communication industry. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 110°C 4 Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >13 MPa ASTM D 2671 > 400% Ultimate Elongation UL 224 0 ± 10% Longitudinal Shrinkage Eccentricity ASTM D 2671 < 40% Heat Aging Tensile Strength 158°C, 168 hrs. > 11 MPa Ultimate Elongation > 300 % Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 > 10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Property of adhesive ASTM E28 95°C + 5°C Ring-Ball Soft Point Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Standard Pcs. Adhesive Inside Inside Total Wall Spool *(QB) Inch mm Diameter Diameter Thickness Thickness *(SS) Qty per bag (min.) (max.) (min.) (nom.) (Meter) 6” 48” 3/16 4/1 4.0 1.0 1.00 0.5 100 24 25 5/16 8/2 8.0 2.0 1.00 0.5 50 18 25 1/2 12/3 12.0 3.0 1.40 0.6 25 14 5 5/8 16/4 16.0 4.0 1.60 0.8 25 14 5 1 24/6 24.0 6.0 2.15 0.8 25 8 5 1 1/4 32/8 32.0 8.0 2.40 1.0 25 5 5 1 1/2 38.1/9.5 38.1 9.5 2.40 1.0 25 5 5 2 52/13 52.0 13.0 2.40 1.0 - 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved. www.Qualtekusa.com 31 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING SHRINK RATIO 4:1 QBK/HBK SERIES Features/Applications Specially designed for the protection of wires, terminals and other components against environmental damage. The semi-rigid composition makes it more abrasion resistant compared with most common tubing and the 4:1 shrink ratio fi ts a wide range of component diameters. With its thicker liner, it forms an eff ective barrier against fl uids and moisture. Operating temperature: -55°C to +125°C Minimum shrink temperature: 110°C Full recovery temperature: 135°C Meets: SAE-AMS-DTL-23053/4, Ford ESB-M99D56-A2, 600V Standard colors: Black and Clear RoHS Compliant Technical Data Property Test Method Test Requirements Tensile Strength ASTM D 2671 >10 MPa Elongation at Break ASTM D 2671 >200% Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 >100% Longitudinal Shrinkage UL 224 -10~0% Heat Shock 250°C, 4 hrs. No cracking, no dropping Cold Bend ( -30°C, 4 hr.) ASTM D 2671 No cracking Dielectric Strength ASTM D 2671 15kV (min.) 14 Minimum Volume Resistance ASTM D 2671 >10 .cm Flammability - Self extinguish in 30 seconds Copper Corrosion (158°C, 168 hrs.)U L 224 Pass Property of adhesive Ring-Ball Soft Point ASTM E 28 135°C ± 5°C Product Dimensions After Recovered Standard As Supplied (mm) (mm) Packaging Cut to Length Size Pcs. Inside Wall Adhesive (mm) Inside Diameter (QB)* Diameter Thickness Thickness (min.) Qty per bag (max.) (min.) (nom.) 6” 48” 6/1.27 6 1.27 1.30 0.56 20 5 8/1.65 8 1.65 1.52 0.76 16 5 12/2.41 12 2.41 1.91 1.02 14 5 18/4.45 18 4.45 2.41 1.37 12 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. www.Qualtekusa.com 32 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Manufactured using a specially designed coating technology. Designed to provide both insulation and create a tight seal for protected articles. Suitable for joints and terminations, it can also be used to protect auto wires, shipping cables, bundled wires and metal tubes against water and moisture especially in ship building. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery Temperature: 110°C Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 >14 MPa ASTM D 2671 > 400% Ultimate Elongation UL 224 -10% Longitudinal Shrinkage ASTM D 2671 < 30% Eccentricity Heat Aging Tensile Strength 250°C, 168 hrs. > 12 MPa Ultimate Elongation > 350 % Heat Shock 300°C, 4 hrs. No Cracking Flammability VW-1 Pass Dielectric Strength IEC 93 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown 14 ASTM D 2671 >10 Ω.cm Volume Resistance Copper Stability UL 224 Pass UL 224 No Corrosion Copper Corrosion Property of adhesive ASTM E28 85°C + 5°C Ring-Ball Soft Point Product Dimensions Standard As Supplied After Recovered Size (mm) (mm) Packaging Cut to Length Adhesive Pcs. Inside Inside Total Wall *(QB) Inch mm Diameter Diameter Thickness Thickness Qty per bag (min.) (max.) (min.) (nom.) 6” 48” 3/4 19/6 19 6 3.0 1.35 14 5 1 25/8 25 8 3.0 1.35 12 5 1 1/4 33/8 33 8 3.0 1.35 5 5 1 1/2 40/12 40 12 3.0 1.35 5 5 2 55/16 55 16 3.0 1.35 3 5 2 1/2 65/19 65 19 3.0 1.35 2 5 3 75/22 75 22 3.0 1.35 2 5 3 3/8 85/25 85 25 3.0 1.35 1 5 4 100/30 100 30 3.0 1.35 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. www.Qualtekusa.com 33 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING , HOT MELT ADHESIVE-LINED SHRINK RATIO 6:1 Features/Applications Ideal for applications of extremely diff erent diameter between cables, connectors and components. The high shrink ratio provides close fi t to a wide variety of irregular shapes, connectors and fi gurations. Provides excellent mechanical protection to cable joints and terminations, complete environmental protection and is resistant to impact and abrasion. Operating temperature: -55°C to +110°C Very high shrink ratio Minimum shrink temperature: 120°C Resistant to UV radiation Full recovery temperature: 120°C High electrical insulation Standard color: Black Superior mechanical property RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 >14 MPa Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 > 12 MPa Longitudinal Shrinkage UL 224 0 ± 10% Elongation at Break ASTM D 2671 > 400% Elongation at Break After Aging (50°C, 168 hrs.) ASTM D 2671 > 300% Dielectric Strength IEC 243 > 18kV / mm 14 Volume Resistance IEC 93 >13 .cm Copper Stability ASTM D 2671 Non-corrosive Heat Shock (225°C, 4hrs.) ASTM D 2671 No cracking or fl owing Property Test Method Typical Data Water Absorption ISO 62 < 0.2% Softening Point ASTM D E28 85°C ± 5°C Peel Strength (PE) DIN 30672 4N / cm Resistance to Fungus and Decay ISO 846 Pass Product Dimensions After Recovered Standard As Supplied (mm) (mm) Packaging Cut to Size Tubing Shape Inside Wall Length Pcs. (mm) Inside Diameter Diameter Thickness *(QB) (min.) (max.) (min.) Qty per bag (48” pcs.) 19/3.2 19.0 3.2 3.2 Round 20 33/5.5 33.0 5.5 3.4 Round 20 44.4/7.4 44.4 7.4 3.6 Round 15 50.8/8.3 50.8 8.3 4.3 Round 15 69.8/11.7 69.8 11.7 4.8 Round 15 88.9/17.1 88.9 17.1 4.8 Round 15 119.4/22.9 119.4 22.9 4.8 Round 10 235/40 235.0 40.0 4.8 Round 10 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 34 HEAT SHRINK MEDIUM/HEAVY WALL BUS BAR TUBING QBTM, QBTH HALOGEN FREE, HEAT SHRINKABLE, 24-36kV BUS BAR INSULATION PROTECTION TUBING Features/Applications Made from specially formulated radiation cross-linked halogen-free compounds. The carefully produced product can provide high resistance to tracking and arcing. Used to enhance the insulation properties of bus bar in switchgear and substations. The continuous length of supplied products makes it more convenient and economical. Operating temperature: -55°C to +105°C Minimum shrink temperature: 120°C RoHS Compliant Halogen free UV and weather resistant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 800% Longitudinal Shrinkage ASTM D 2671 0 to -10% Heat Aging Tensile Strength (120 °C, 168 hrs.) ASTM D 2671 > 10MPa Ultimate Elongation > 200% Dielectric Strength IEC 243 > 19kV/mm Dielectric Constant IEC 250 < 3.5 14 Volume Resistance IEC 93 > 10 Ω .cm Flammability (Oxygen Index) ISO 4589 > 25 Copper Corrosion UL 224 No corrosion Cold Bend ASTM D 2671 (-40°C, 4 hrs.) No cracking Water Absorption ISO 62 (23°C, 14 days) < 0.5% Product Dimensions QBTM-Medium Wall Bus Bar Tubing 24kV As Supplied (mm) After Recovered (mm) Standard Spool Size Tubing *(SS) (mm) Shape Inside Diameter Inside Diameter Wall Thickness (Meter) (min) (max) (min) Continuous Length Tubing 15/6 15 6 2.0 Flat 30 30/12 30 12 2.3 Flat 30 40/16 40 16 2.5 Flat 30 50/20 50 20 2.5 Flat 15 65/25 65 25 2.5 Flat 15 75/30 75 30 2.6 Flat 15 100/40 100 40 2.8 Flat 15 120/50 120 50 2.8 Flat 15 Standard Packaging Cut Length Tubing *(QB) (mm) 150/60 150 60 3.3 Round 1000 180/60 180 60 3.3 Round 1000 205/75 205 75 3.8 Round 1000 235/75 235 75 3.8 Round 1000 Product Dimensions QBTH-Heavy Wall Bus Bar Tubing 36kV As Supplied (mm) After Recovered (mm) Standard Spool Size Tubing *(SS) (mm) Inside Diameter Inside Diameter Wall Thickness Shape (Meter) (min) (max) (min) 25/10 25 10 4.0 Flat 15 40/16 40 16 4.0 Flat 15 Standard Packaging Cut Length Tubing *(QB) (mm) 65/25 65 25 4.0 Round 1000 75/25 75 25 4.0 Round 1000 95/30 95 30 4.0 Round 1000 120/40 120 140 4.2 Round 1000 180/58 180 58 4.2 Round 1000 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Special sizes, packaging, and cut pieces are available upon request. www.Qualtekusa.com 35 END CAPS QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Features/Applications QSEC off ers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps has a layer of spiral coated hot melt adhesive, which retains its fl exible properties after recovery. Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV radiation, etc. Operating temperature: -55°C to +110°C, 1000V Minimum shrink temperature: 120°C L Dw RoHS Compliant A Protection against oxidation, ozone & UV radiation Easy to fi t on cable end D Ensures seal A-spiral hot melt adhesive Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +110°C Tensile Strength ASTM D 638 > 14 MPa Elongation at Break ASTM D 638 > 400% Density ASTM D 792 1.05 Elongation at Break After Aging 150°C, 168 hrs. > 300% Dielectric Strength IEC 243 > 15kV/ mm 14 Volume Resistance IEC 93 > 10 .cm Product Dimensions As Supplied Standard Recovered (mm) For Cable (mm) Packaging Part Number Diameter *(QB) (mm) D (min) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%) (Qty) Standard Length End Cap QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 200 QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200 QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150 QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150 QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100 QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100 QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50 QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40 QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30 QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15 QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15 QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10 QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10 Extended Length End Cap QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200 QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100 QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50 QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50 QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40 QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40 QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30 Notes: 1. End cap with valve stem is available upon request. 2. * See page 12 - Part Number Guide for standard packaging codes. 3. Cross Reference Guide located on page 3. www.Qualtekusa.com 36 SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS QKITS, REFILL BAGS, Q BOX & MINI SPOOLS Q2-F TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / KITS 1 & 2 BLACK, KIT 4 ASSORTED COLORS THIN WALL, ENVIRONMENT FRIENDLY, HIGHLY FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5 SMALL SIZES P/N Q2-F-QK1-01-6IN-180 REFILL BAGS Q2-F, Kit 1 Refi ll Bags Q2-F Kit 1 consists of 180 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 3/64 1.6 40 pcs. Black Q2-F-RK1-3/64-01-6IN-40 40 pcs. Black 1/16 2.0 36 pcs. Black Q2-F-RK1-1/16-01-6IN-36 36 pcs. Black 3/32 3.1 32 pcs. Black Q2-F-RK1-3/32-01-6IN-32 32 pcs. Black 1/8 3.7 28 pcs. Black Q2-F-RK1-1/8-01-6IN-28 28 pcs. Black 3/16 5.2 24 pcs. Black Q2-F-RK1-3/16-01-6IN-24 24 pcs. Black Q2-F KIT 1 6” LENGTH 1/4 6.8 20 pcs. Black Q2-F-RK1-1/4-01-6IN-20 20 pcs. Black 180 PCS. LARGE SIZES P/N Q2-F-QK2-01-6IN-82 REFILL BAGS Q2-F, Kit 2 Refi ll Bags Q2-F Kit 2 consists of 82 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 5/16 8.8 18 pcs. Black Q2-F-RK2-5/16-01-6IN-18 18 pcs. Black 3/8 10.7 16 pcs. Black Q2-F-RK2-3/8-01-6IN-16 16 pcs. Black 1/2 13.7 14 pcs. Black Q2-F-RK2-1/2-01-6IN-14 14 pcs. Black 5/8 16.7 14 pcs. Black Q2-F-RK2-5/8-01-6IN-14 14 pcs. Black 3/4 20.5 12 pcs. Black Q2-F-RK2-3/4-01-6IN-12 12 pcs. Black Q2-F KIT 2 6” LENGTH 1 25.4 8 pcs. Black Q2-F-RK2-1-01-6IN-8 8 pcs. Black 82 PCS. ASSORTED COLORS P/N Q2-F-QK4-11-6IN-141 REFILL BAGS Q2-F, Kit 4 Refi ll Bags Q2-F Kit 4 consists of 141 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 1/16 2.0 39 pcs. Assorted Q2-F-RK4-1/16-11-6IN-39 39 pcs. Assorted 1/8 3.7 31 pcs. Assorted Q2-F-RK4-1/8-11-6IN-31 31 pcs. Assorted 1/4 6.8 23 pcs. Assorted Q2-F-RK4-1/4-11-6IN-23 23 pcs. Assorted 3/8 10.7 19 pcs. Assorted Q2-F-RK4-3/8-11-6IN-19 19 pcs. Assorted Q2-F-RK4-1/2-11-6IN-19 19 pcs. Assorted 1/2 13.7 19 pcs. Assorted Q2-F KIT 4 6” LENGTH Q2-F-RK4-1-11-6IN-10 10 pcs. Assorted 141 PCS. 1 25.4 10 pcs. Assorted Q BOX MINI SPOOLS Box Spool Size Size Part Number Length Part Number Length (Inch) (Inch) Q BOX (Feet) (Feet) Q2-F-3/64-01-QX50FT 3/64 50 Q2-F-3/64-01-MS100FT 3/64 100 Q2-F-1/16-01-QX50FT 1/16 50 Q2-F-1/16-01-MS100FT 1/16 100 Q2-F-3/32-01-QX50FT 3/32 50 Q2-F-3/32-01-MS100FT 3/32 100 Q2-F-1/8-01-QX50FT 1/8 50 Q2-F-1/8-01-MS100FT 1/8 100 Q2-F-3/16-01-QX30FT 3/16 30 Q2-F-3/16-01-MS100FT 3/16 100 Q2-F-1/4-01-QX30FT 1/4 30 Q2-F-1/4-01-MS100FT 1/4 100 Q2-F-5/16-01-QX30FT 5/16 30 Q2-F-5/16-01-MS100FT 5/16 100 Q2-F-3/8-01-QX30FT 3/8 30 Q2-F-3/8-01-MS100FT 3/8 100 Q2-F-1/2-01-QX15FT 1/2 15 Q2-F-1/2-01-MS100FT 1/2 100 VARIOUS LENGTHS Q2-F-5/8-01-QX15FT 5/8 15 Q2-F-5/8-01-MS50FT 5/8 50 PER SIZE Q2-F-3/4-01-QX15FT 3/4 15 Q2-F-3/4-01-MS50FT 3/4 50 Q2-F-1-01-MS50FT 1 50 Q2-F-1 1/2-01-MS50FT 1 1/2 50 Q2-F-2-01-MS50FT 2 50 Q2-F3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK THIN WALL, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5 ASSORTED SIZES P/N Q2-F3X-QK1-01-6IN-106 REFILL BAGS Q2-F3X, Kit 1 Refi ll Bags Q2-F3X Kit 1 consists of 106 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 1/16 2.0 28 pcs. Black Q2-F3X-RK1-1/16-01-6IN-28 28 pcs. Black 1/8 3.7 24 pcs. Black Q2-F3X-RK1-1/8-01-6IN-24 24 pcs. Black 1/4 6.8 20 pcs. Black Q2-F3X-RK1-1/4-01-6IN-20 20 pcs. Black 1/2 10.7 14 pcs. Black Q2-F3X-RK1-1/2-01-6IN-14 14 pcs. Black 3/4 13.7 12 pcs. Black Q2-F3X-RK1-3/4-01-6IN-12 12 pcs. Black Q2-F3X KIT 1 6” LENGTH 1 25.4 8 pcs. Black Q2-F3X-RK1-1-01-6IN-8 8 pcs. Black 106 PCS. www.Qualtekusa.com 37 SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS QKITS & REFILL BAGS Q2-Z TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK THIN WALL, GENERAL PURPOSE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C SMALL SIZES P/N Q2-Z-QK1-01-6IN-180 REFILL BAGS Q2-Z, Kit 1 Refi ll Bags Q2-Z Kit 1 consists of 180 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 3/64 1.6 40 pcs. Black Q2-Z-RK1-3/64-01-6IN-40 40 pcs. Black 1/16 2.0 36 pcs. Black Q2-Z-RK1-1/16-01-6IN-36 36 pcs. Black 3/32 3.1 32 pcs. Black Q2-Z-RK1-3/32-01-6IN-32 32 pcs. Black 1/8 3.7 28 pcs. Black Q2-Z-RK1-1/8-01-6IN-28 28 pcs. Black 3/16 5.2 24 pcs. Black Q2-Z-RK1-3/16-01-6IN-24 24 pcs. Black Q2-Z KIT 1 6” LENGTH 180 PCS. 1/4 6.8 20 pcs. Black Q2-Z-RK1-1/4-01-6IN-20 20 pcs. Black LARGE SIZES P/N Q2-Z-QK2-01-6IN-82 REFILL BAGS Q2-Z, Kit 2 Refi ll Bags Q2-Z Kit 2 consists of 82 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 5/16 8.8 18 pcs. Black Q2-Z-RK2-5/16-01-6IN-18 18 pcs. Black 3/8 10.7 16 pcs. Black Q2-Z-RK2-3/8-01-6IN-16 16 pcs. Black 1/2 13.7 14 pcs. Black Q2-Z-RK2-1/2-01-6IN-14 14 pcs. Black 5/8 16.7 14 pcs. Black Q2-Z-RK2-5/8-01-6IN-14 14 pcs. Black 3/4 20.5 12 pcs. Black Q2-Z-RK2-3/4-01-6IN-12 12 pcs. Black Q2-Z KIT 2 82 PCS. 1 25.4 8 pcs. Black 6” LENGTH Q2-Z-RK2-1-01-6IN-8 8 pcs. Black Q5-2X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-2X-QK1-01-6IN-114 REFILL BAGS Q5-2X, Kit 1 Refi ll Bags Q5-2X Kit 1 consists of 114 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 1/8 3.7 28 pcs. Black Q5-2X-RK1-1/8-01-6IN-28 28 pcs. Black 3/16 5.2 24 pcs. Black Q5-2X-RK1-3/16-01-6IN-24 24 pcs. Black 1/4 6.8 20 pcs. Black Q5-2X-RK1-1/4-01-6IN-20 20 pcs. Black 3/8 10.7 16 pcs. Black Q5-2X-RK1-3/8-01-6IN-16 16 pcs. Black 1/2 13.7 14 pcs. Black Q5-2X-RK1-1/2-01-6IN-14 14 pcs. Black Q5-2X KIT 1 6” LENGTH 3/4 20.5 12 pcs. Black Q5-2X-RK1-3/4-01-6IN-12 12 pcs. Black 114 PCS. Q5-3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-3X-QK1-01-6IN-114 Q5-3X, Kit 1 Refi ll Bags REFILL BAGS Q5-3X Kit 1 consists of 114 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 1/8 3.7 28 pcs. Black Q5-3X-RK1-1/8-01-6IN-28 28 pcs. Black 3/16 5.2 24 pcs. Black Q5-3X-RK1-3/16-01-6IN-24 24 pcs. Black 1/4 6.8 20 pcs. Black Q5-3X-RK1-1/4-01-6IN-20 20 pcs. Black 3/8 10.7 16 pcs. Black Q5-3X-RK1-3/8-01-6IN-16 16 pcs. Black 1/2 13.7 14 pcs. Black Q5-3X-RK1-1/2-01-6IN-14 14 pcs. Black Q5-3X KIT 1 6” LENGTH 114 PCS. 3/4 20.5 12 pcs. Black Q5-3X-RK1-3/4-01-6IN-12 12 pcs. Black Q5-F3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-F3X-QK1-01-6IN-114 REFILL BAGS Q5-F3X, Kit 1 Refi ll Bags Q5-F3X Kit 1 consists of 114 pcs. Consist of 6” length pcs. Size QTY Color Part Number QTY Color Inch mm 1/8 3.7 28 pcs. Black Q5-F3X-RK1-1/8-01-6IN-28 28 pcs. Black 3/16 5.2 24 pcs. Black Q5-F3X-RK1-3/16-01-6IN-24 24 pcs. Black 1/4 6.8 20 pcs. Black Q5-F3X-RK1-1/4-01-6IN-20 20 pcs. Black 3/8 10.7 16 pcs. Black Q5-F3X-RK1-3/8-01-6IN-16 16 pcs. Black 1/2 13.7 14 pcs. Black Q5-F3X-RK1-1/2-01-6IN-14 14 pcs. Black Q5-F3X KIT 1 6” LENGTH 3/4 20.5 12 pcs. Black Q5-F3X-RK1-3/4-01-6IN-12 12 pcs. Black 114 PCS. www.Qualtekusa.com 38 39 MARKER CABLE TIES 11 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Write Area Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] mm [Inch] M - 18lb TYPE A 11-M100 2.5 [.098] 100 [4.0] 22.0 [0.86] 8 [18] 7.75x24.5 [0.30x0.95] 11-M200 2.5 [.098] 200 [8.0] 53.9 [2.12] 8 [18] 7.75x24.5 [0.30x0.95] M - 18lb TYPE C 11-M110 2.5 [.098] 110 [4.3] 22.6 [0.89] 8 [18] 9.0x20 [0.35x0.78] S - 50lb TYPE B 11-S190 4.8 [.189] 190 [7.0] 50.9 [2.00] 22 [50] 12.9x27 [0.50x1.05] Note: 1. 11-M110 and 11-M200 are not UL approved Cross Reference Guide located on pages 4-8. TYPE A TYPE B TYPE C PART NUMBER SYSTEM 11 M 200 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH WIDTH WIDTH 40 www.Qualtekusa.com LENGTH LENGTH LENGTH DOUBLE LOOP CABLE TIES 12 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] S - 50lb 12-S200 4.8 [.189] 200 [7.9] 57.1 [2.15] 22 [50] 12-S300 4.8 [.189] 300 [11.8] 85.3 [3.36] 22 [50] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 12 S 200 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH www.Qualtekusa.com 41 LENGTH BALL DIAMETER BALL DIAMETER BEADED CABLE TIES 13 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Ball Diameter Length Part Number Diameter mm [Inch] mm [Inch] mm [Inch] HEAD TYPE A 13-100 2.5 [.095] 100 [4.0] 25.0 [0.98] HEAD TYPE B 13-150 2.5 [.095] 150 [6.0] 36.0 [1.41] 13-200 2.5 [.095] 200 [8.0] 51.9 [2.04] Note: Cross Reference Guide located on pages 4-8. HEAD TYPE A HEAD TYPE B PART NUMBER SYSTEM 13 200 B C SERIES LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity 42 www.Qualtekusa.com LENGTH LENGTH DOUBLE LOOP BEADED CABLE TIES 14 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Ball Diameter Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] S - 50lb 14-S210 4.5 [.177] 210 [8.0] 53.5 [2.10] 22 [50] 14-S310 4.5 [.177] 310 [12.0] 83.8 [3.30] 22 [50] HD - 120lb 14-HD460 6.5 [.255] 460 [18.0] 129.5 [5.10] 55 [120] 14-HD610 6.5 [.255] 610 [24.0] 175.2 [6.90] 55 [120] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 14 S 210 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity BALL DIAMETER www.Qualtekusa.com 43 LENGTH CABLE TIES RUBBER ADHESIVE MOUNTING BASE 15 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC 1 APPROVALS : Cable Ties Length Width Part Number Screw Size Width up to mm [Inch] mm [Inch] mm [Inch] 15-1919 19.0 [.750] 19.0 [.750] M5 [#10] 3.6 [.140] 15-2525 28.0 [1.10] 28.0 [1.10] M5 [#10] 4.8 [.189] 15-4040 40.0 [1.50] 40.0 [1.50] M5 [#10] 9.0 [.354] Note: 1. 15-4040 is not UL approved Cross Reference Guide located on pages 4-8. WIDTH PART NUMBER SYSTEM 15 1919 B C SERIES SIZE MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity 44 www.Qualtekusa.com SCREW SIZE LENGTH CABLE TIES SCREW MOUNT BASE 16 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC Cable Ties Length Width Height Diameter Part Number Width up to mm [Inch] mm [Inch] mm [Inch] mm [Inch] mm [Inch] 16-1509 15.2 [.600] 9.4 [.370] 6.80 [.267] 3.30 [.130] 4.8 [.189] 16-1712 17.8 [.700] 12.7 [.500] 8.20 [.320] 4.31 [.170] 4.8 [.189] 16-2216 22.0 [.870] 16.2 [.640] 9.60 [.385] 5.20 [.205] 7.6 [.300] 16-2516 25.4 [1.00] 16.2 [.640] 10.80 [.425] 5.20 [.205] 9.0 [.354] Note: Cross Reference Guide located on pages 4-8. LENGTH PART NUMBER SYSTEM 16 1509 B C SERIES SIZE MATERIAL/COLOR N: Natural DIAMETER B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity www.Qualtekusa.com 45 WIDTH HEIGHT STANDARD NYLON CABLE TIES 17 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] M - 18lb 17-M80 2.5 [.098] 80 [3.2] 14.0 [0.55] 8 [18] 17-M100 2.5 [.098] 100 [4.0] 20.5 [0.80] 8 [18] 17-M120 2.5 [.098] 120 [4.7] 27.0 [1.06] 8 [18] 17-M130 2.5 [.098] 130 [5.0] 30.0 [1.18] 8 [18] 17-M150 2.5 [.098] 150 [6.0] 36.5 [1.43] 8 [18] 17-M160 2.5 [.098] 160 [6.3] 39.8 [1.56] 8 [18] 17-M200 2.5 [.098] 200 [8.0] 52.5 [2.06] 8 [18] 17-M260 2.5 [.098] 260 [10.2] 71.6 [2.81] 8 [18] I - 40lb 17-I140 3.6 [.14] 140 [5.5] 33.0 [1.30] 18 [40] 17-I150 3.6 [.14] 150 [6.0] 36.0 [1.41] 18 [40] 17-I180 3.6 [.14] 180 [7.0] 46.0 [1.81] 18 [40] 17-I200 3.6 [.14] 200 [8.0] 52.5 [2.06] 18 [40] 17-I250 3.6 [.14] 250 [10.0] 68.0 [2.67] 18 [40] 17-I280 3.6 [.14] 280 [11.0] 78.0 [3.07] 18 [40] 17-I300 3.6 [.14] 300 [11.8] 84.0 [3.30] 18 [40] 17-I370 3.6 [.14] 370 [14.5] 106.0 [4.17] 18 [40] S - 50lb 17-S120 4.6 [.181] 120 [4.7] 23.8 [0.93] 22 [50] 17-S160 4.6 [.181] 160 [6.3] 36.6 [1.32] 22 [50] 17-S180 4.8 [.189] 180 [7.0] 43.0 [1.68] 22 [50] 17-S190 4.8 [.189] 190 [7.5] 46.0 [1.81] 22 [50] 17-S200 4.8 [.189] 200 [8.0] 49.5 [1.94] 22 [50] 17-S250 4.8 [.189] 250 [10.0] 65.0 [2.55] 22 [50] 17-S280 4.8 [.189] 280 [11.0] 74.8 [2.94] 22 [50] 17-S300 4.8 [.189] 300 [11.8] 81.0 [3.18] 22 [50] 17-S350 4.8 [.189] 350 [13.7] 97.0 [3.81] 22 [50] 17-S360 4.8 [.189] 360 [14.0] 100.0 [3.93] 22 [50] 17-S370 4.8 [.189] 370 [14.5] 103.5 [4.07] 22 [50] 17-S380 4.8 [.189] 380 [15.0] 106.7 [4.20] 22 [50] 17-S390 4.8 [.189] 390 [15.3] 110.0 [4.33] 22 [50] 17-S400 4.8 [.189] 400 [15.7] 113.1 [4.45] 22 [50] 17-S430 4.8 [.189] 430 [17.0] 122.5 [4.82] 22 [50] 17-S450 4.8 [.189] 450 [17.7] 129.0 [5.07] 22 [50] 17-S500 4.8 [.189] 500 [19.7] 145.0 [5.70] 22 [50] 17-S550 4.8 [.189] 550 [21.6] 160.9 [6.33] 22 [50] HD - 120lb 17-HD150 7.6 [.300] 150 [6.0] 35.0 [1.37] 55 [120] 17-HD200 7.6 [.300] 200 [8.0] 50.9 [2.00] 55 [120] 17-HD220 7.6 [.300] 220 [8.6] 57.2 [2.25] 55 [120] 17-HD250 7.6 [.300] 250 [10.0] 66.8 [2.62] 55 [120] 17-HD300 7.6 [.300] 300 [11.8] 82.8 [3.25] 55 [120] 17-HD350 7.6 [.300] 350 [13.7] 98.5 [3.87] 55 [120] 17-HD365 7.6 [.300] 365 [14.0] 103.5 [4.07] 55 [120] 17-HD380 7.6 [.300] 380 [15.0] 108.0 [4.25] 55 [120] 17-HD400 7.6 [.300] 400 [15.7] 114.5 [4.50] 55 [120] 17-HD450 7.6 [.300] 450 [17.0] 130.5 [5.13] 55 [120] 17-HD540 7.6 [.300] 540 [21.0] 159.0 [6.25] 55 [120] 17-HD550 7.6 [.300] 550 [21.6] 162.5 [6.39] 55 [120] WIDTH 17-HD750 7.6 [.300] 750 [29.5] 226.1 [8.90] 55 [120] Note: 1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB, 17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT, 17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB, are not UL approved Continued on next page Material/Color LT and V0 are not UL approved Cross Reference Guide located on pages 4-8. 46 www.Qualtekusa.com LENGTH STANDARD NYLON CABLE TIES 17 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] EHD - 175lb 17-EHD400 8.8 [.345] 400 [15.7] 115.0 [4.52] 80 [175] 17-EHD450 8.8 [.345] 450 [18.0] 130.5 [5.13] 80 [175] 17-EHD500 8.8 [.345] 500 [19.7] 146.5 [5.76] 80 [175] 17-EHD550 8.8 [.345] 550 [21.6] 163.5 [6.43] 80 [175] 17-EHD610 8.8 [.345] 610 [24.0] 181.5 [7.14] 80 [175] 17-EHD750 8.8 [.345] 750 [29.5] 226.5 [8.91] 80 [175] 17-EHD760 8.8 [.345] 760 [30.0] 229.5 [9.03] 80 [175] 17-EHD780 8.8 [.345] 780 [30.5] 235.5 [9.27] 80 [175] 17-EHD810 9.0 [.350] 810 [32.0] 245.0 [9.64] 80 [175] 17-EHD920 9.0 [.350] 920 [36.0] 280.0 [11.0] 80 [175] 17-EHD1220 9.0 [.350] 1220 [48.0] 375.5 [14.7] 80 [175] HSD - 250lb 17-HSD530 12.4 [.490] 530 [21.0] 156.0 [5.90] 110 [250] 17-HSD650 12.4 [.490] 650 [25.5] 195.0 [7.60] 110 [250] 17-HSD1000 12.4 [.490] 1000 [40.0] 305.0 [12.0] 110 [250] 17-HSD1030 12.4 [.490] 1030 [40.5] 315.0 [12.4] 110 [250] Note: Cross Reference Guide located on pages 4-8. 1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB, 17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT, 17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB, are not UL approved Material/Color LT and V0 are not UL approved Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 17 EHD 610 B M SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural Y: Yellow WH: White R: Red B: Normal UV Black P: Purple UVB: Weather Resistant Black BR: Brown HSB: Heat Stabilized Black GR: Gray HSN: Heat Stabilized Natural O: Orange HT: High Heat Resistant Natural FG: Fluorescent Green LT: Low Temperature Resistant Natural FY: Fluorescent Yellow V0: Flame Retardant Natural FB: Fluorescent Blue G: Green FO: Fluorescent Orange BL: Blue S: Silver PACKAGE SIZE L: 50PCS C: 100PCS D: 500PCS WIDTH M: 1000PCS Number: Other Quantity www.Qualtekusa.com 47 LENGTH FASTENER MOUNTING HOLE CABLE TIES 18 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Part Number Diameter Fastener mm [Inch] mm [Inch] Kg [lb] mm [Inch] M - 18lb 18-M110 2.5 [.098] 110 [4.3] 19.0 [0.75] 8 [18] M2.5 [#4] I - 40lb 18-I150 3.6 [.14] 150 [6.0] 35.5 [1.40] 18 [40] M4 [#8] S - 50lb 18-S160 4.8 [.189] 160 [6.3] 36.8 [1.45] 22 [50] M5 [#10] 18-S200 4.8 [.189] 200 [8.0] 49.8 [1.96] 22 [50] M5 [#10] 18-S305 4.8 [.189] 305 [12.0] 82.8 [3.26] 22 [50] M5 [#10] 18-S370 4.8 [.189] 370 [14.5] 103.8 [4.09] 22 [50] M5 [#10] HD - 120lb 18-HD305 7.6 [.300] 305 [12.0] 78.7 [3.10] 55 [120] M6 [#1/4] 18-HD400 7.6 [.300] 400 [15.7] 109.2 [4.30] 55 [120] M6 [#1/4] Note: 1. 18-M110, is not UL approved Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 18 HD 400 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH 48 www.Qualtekusa.com LENGTH RELEASABLE PAWL TYPE CABLE TIES 19 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] I - 40lb 19-I100 3.6 [.14] 100 [4.0] 22.6 [0.89] 18 [40] S - 50lb 19-S160 4.8 [.189] 160 [6.3] 41.9 [1.65] 22 [50] 19-S200 4.8 [.189] 200 [8.0] 54.8 [2.16] 22 [50] 19-S305 4.8 [.189] 305 [12.0] 88.1 [3.47] 22 [50] 19-S380 4.8 [.189] 380 [15.0] 111.0 [4.39] 22 [50] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 19 S 200 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH www.Qualtekusa.com 49 LENGTH RELEASABLE TRIGGER TYPE CABLE TIES 20 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS: Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] S - 50lb 20-S150 7.6 [.300] 150 [6.0] 40.3 [1.59] 22 [50] 20-S200 7.6 [.300] 200 [8.0] 55.6 [2.19] 22 [50] 20-S250 7.6 [.300] 250 [10.0] 71.8 [2.83] 22 [50] 20-S300 7.6 [.300] 300 [11.8] 88.1 [3.47] 22 [50] 20-S370 7.6 [.300] 370 [14.5] 109.9 [4.33] 22 [50] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 20 S 200 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH 50 www.Qualtekusa.com LENGTH PUSH MOUNT CABLE TIES 21 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] M - 18lb 21A-M100 2.5 [.098] 100 [4.0] 21.6 [0.85] 8 [18] I - 40lb 21B-I155 3.6 [.140] 155 [6.0] 37.9 [1.49] 18 [40] S - 50lb 21A-S100 4.8 [.189] 100 [4.0] 21.6 [0.85] 22 [50] PART NUMBER SYSTEM 21A-S130 4.8 [.189] 130 [5.1] 30.7 [1.21] 22 [50] 21A-S200 4.8 [.189] 200 [8.0] 50.0 [1.97] 22 [50] 21A S 200 B C 21B-S200 4.8 [.189] 200 [8.0] 50.8 [2.00] 22 [50] Note: 1. 21B-I155 is not UL approved Cross Reference Guide located on pages 4-8. SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity 21A SERIES W1 W2 D1 Part Number mm [Inch] mm [Inch] mm [Inch] 21A-M100 5.58 [.220] 18.4 [.725] 3.55 [.140] 21A-S100 8.38 [.330] 18.9 [.745] 4.60 [.181] 21A-S130 8.38 [.330] 18.9 [.745] 4.60 [.181] 21A-S200 7.62 [.300] 17.1 [.675] 4.60 [.181] LENGTH 21B SERIES W1 D1 Part Number mm [Inch] mm [Inch] 21B-I155 5.97 [.235] 3.55 [.140] 21B-S200 7.60 [.300] 4.44 [.175] LENGTH www.Qualtekusa.com 51 W1 W2 D1 W1 D1 WIDTH WIDTH ▲ STAINLESS STEEL CABLE TIES 22 Series SELF-LOCKING BALL LOCK HEAD DESIGN PROVIDES A STRONG, DURABLE METHOD OF CABLE BUNDLING CAN BE USED IN A WIDE RANGE OF INDOOR, OUTDOOR AND UNDERGROUND APPLICATIONS 304 STAINLESS STEEL FOR GENERAL PURPOSE APPLICATIONS 316 STAINLESS STEEL FOR CORROSIVE ENVIRONMENTS OPERATING TEMPERATURE: -80ºC to +538ºC 1 APPROVALS : Max Bundle Width Length Min Loop Tensile Part Number Diameter mm [Inch] mm [Inch] Kg [lb] mm [Inch] S - 200lb 22-S125 4.6 [.180] 125 [5.0] 38.0 [1.49] 90 [200] 22-S150 4.6 [.180] 150 [6.0] 46.0 [1.81] 90 [200] ▲ 22-S200 4.6 [.180] 200 [8.0] 61.9 [2.43] 90 [200] 22-S260 4.6 [.180] 260 [10.0] 81.0 [3.19] 90 [200] 22-S290 4.6 [.180] 290 [11.5] 90.6 [3.56] 90 [200] 22-S360 4.6 [.180] 360 [14.0] 112.8 [4.44] 90 [200] 22-S520 4.6 [.180] 520 [20.5] 163.8 [6.45] 90 [200] 22-S680 4.6 [.180] 680 [27.0] 214.8 [8.45] 90 [200] 22-S840 4.6 [.180] 840 [33.0] 265.7 [10.46] 90 [200] H - 350lb 22-H200 7.9 [.310] 200 [8.0] 61.9 [2.43] 160 [350] 22-H260 7.9 [.310] 260 [10.0] 81.0 [3.19] 160 [350] 22-H290 7.9 [.310] 290 [11.5] 90.6 [3.56] 160 [350] 22-H360 7.9 [.310] 360 [14.0] 112.8 [4.44] 160 [350] 22-H520 7.9 [.310] 520 [20.5] 163.8 [6.45] 160 [350] 22-H680 7.9 [.310] 680 [27.0] 214.8 [8.45] 160 [350] 22-H840 7.9 [.310] 840 [33.0] 265.7 [10.46] 160 [350] EH - 500lb 22-EH290 12 [.485] 290 [11.5] 90.6 [3.56] 235 [500] 22-EH360 12 [.485] 360 [14.0] 112.8 [4.44] 235 [500] 22-EH520 12 [.485] 520 [20.5] 163.8 [6.45] 235 [500] 22-EH680 12 [.485] 680 [27.0] 214.8 [8.45] 235 [500] 22-EH840 12 [.485] 840 [33.0] 265.7 [10.46] 235 [500] Note: 1. 22-H260, 22-EH290C, 22-EH360C, 22-EH520C, 22-EH680C, 22-EH840C, 22-EH290D, 22-EH360D, 22-EH520D, 22-EH680D, 22-EH840D are not UL approved Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 22 EH 680 A C SERIES CROSS SECTION LENGTH MATERIAL/COLOR A: 304 Stainless Steel C: 304 Epoxy Coated Stainless Steel B: 316 Stainless Steel D: 316 Epoxy Coated Stainless Steel PACKAGE SIZE WIDTH C: 100PCS Number: Other Quantity 52 www.Qualtekusa.com LENGTH ▲ ▲ P������ P������ F F��-S D������� � � -S D� � � � � � � A AC & DC F C & DC Fans and Accessories ans and Accessories Low cost, high tech AC & DC axial fans with sizes ranging from 25mm - 280 mm, DC voltages from 3.3VDC - 60VDC and AC voltages from 115VAC - 230VAC and many special features such as IP55, IP56M, and IP67 rated, GR487 salt fog rated, speed sensors, alarm func� ons and much more upon request. Each fan is off ered with a variety of bearing types : 2-ball, 1-ball 1-sleeve, sleeve only, and our newly developed hydro dynamic bearing with be� er performance than sleeve and lower cost than 2 ball bearings. Every fan is available with a wide range of speeds from ultra low to super high speed. Our fan accessories are famous worldwide and consist of wire form and plas� c guards, plas� c air fi lters, aluminum and stainless steel air fi lters, fan cords, and our pa pat te en nt ted ed noise r noise reduc� educ� on on vibr vibra a� � on sleev on sleeve es. s. P����� P������ P� � P���� C ��� C��������� D������� ��������� D������� A AC R C Recept eceptacle acles s A complete line of inlets, outlets, mul� func� on modules with major interna� onal approval marks thus assuring high safety standards and help customers comply with interna� onal regula� ons. Modern produc� on methods enable us to manufacture cost-eff ec� ve and reliable components. A full range of products are maintained in inventory for quick on-� me deliveries. Custom designs are available upon request. Circuit Breakers QLB and QMB series are compact and cost eff ec� ve thermal circuit breakers with a wide range of amp ra� ngs from 3A - 40A and off ered in single pole and push-to-reset with safety agency cer� fi ca� ons. We off er a large variety of bushing types, terminals, name plates, bu� on colors and prin� ng with custom confi gura� ons available. EMI Filters EMI/RFI power line fi lters are designed to meet most interna� onal safety agency requirements. These fi lters help customers meet FCC and VDE emission standards. Our line consists of many standard confi gura� ons such as block type, fi lter with power line connector, and various fi lters with mul� func� onal modules. Custom designs are available upon request. Power Cords A large selection of North American and International Power Cords that have been designed to comply with North American and international safety agency regulations to insure safe and reliable products. Offered in a wide selection of plugs and connectors available in various cable insulations, voltage ratings, colors, lengths, shielding and a full range of hospital grade certified power cords. Custom configurations and strain reliefs are available upon request. Power Supplies A full range of low cost, high reliability and energy saving switch mode AC/DC power supplies consis� ng of enclosed, open frame, din rail, wall mount, desktop, medical approved, and waterproof LED drivers; our enclosed versions are rated from 15W - 800W, open frame from 20W - 200W, desktop and wall mount from 5W - 200W, and LED drivers with constant current 25W - 200W and constant voltage 25W - 300W. All models have universal voltage input and a variety of output voltages ranging from 3.3V - 48V and some models include power factor correc� on to increase effi ciency and reduce power losses. All of our power supplies meet or exceed the RoHS EU and the Chinese direc� ves and are cer� fi ed with worldwide safety agencies to ensure a safe and reliable product. W W��� M��� ��� M��������� ������, C���� A�������� , C���� A�������� � � � I���� � � I����� ����� ������ D������ �� D������� Cable Assemblies Cable Assemblies We off er a wide selec� on of standard and custom cable assemblies, specializing in DVI, HDMI, USB and Fiber Op� c and also producing fl at ribbon cables, monitor cables, networking cables and an extensive off ering of custom cable assemblies and wire harnesses. Cable Ties & Accessories Our low cost, high reliability cable nylon � es are available in a variety of styles including miniature, intermediate, standard and heavy duty. Specialty cable � es include releasable pawl type, stainless steel ball lock, head mount, push mount, marker � es, double loop, beaded and 4-way cable � e mounts. Cable � es are available in various material types including ultraviolet, heat stabilized, fi re retardant and also are available in a range of colors. Custom designs and colors available upon request. Heat Shrink Products Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insula� on, molded parts and end caps, cold shrink, wide range of shrink tubing kits and heat shrinkable cable and wire iden� fi ca� on tubing. I������������ P���������� S������� D������� Procurement Services With over 30 years of global business experience, Qualtek’s IPS division provides a complete range of services from component sourcing to complete turnkey projects. With our extensive knowledge of the major global manufacturing regions, this enables us to have access to the newest technology, highest quality, and the most cost eff ec� ve produc� on methods. 7610 Jenther Dr. * Mentor, Ohio 44060 * USA Telephone: 1.440.951.3300 * Fax: 1.440.951.7252 E-mail: mailbox@qualtekusa.com Web: www.Qualtekusa.com HST-0600