135-500R0-JBW - RCD - Electronics Finder

Description

Res Wirewound 50 Ohm 5% 3W ±20ppm/°C Silicone AXL Bulk
135-500R0-JBW

Part Number

135-500R0-JBW

Price

Request Quote

Manufacturer

RCD

Lead Time

Request Quote

Category

Resistors » Resistor Fixed Single-Through Hole

Specifications

Manufacturer

RCD

Manufacturers Part #

135-500R0-JBW

Industry Aliases

135-500-JBW

Sub-Category

Fixed Single-Through Hole Resistors

Packaging

Bulk

Factory Pack Quantity

1000

Datasheet

100-fa039.pdf

291 KiB

Download

Extracted Text

RoHS PRECISION POWER WIREWOUND RESISTORS RESISTORSCAPACITORSCOILSDELAY LINES SILICONE COATED 1/2 WATT TO 50 WATT RCD 160F Term.W 10KΩ 5% is Pb-free and RoHS 100 SERIES compliant Series 100 resistors offer exceptional performance at an economical cost. Superior stability results from welded construction and windings of premium World’s widest range! 0.005Ω ~2MΩ, ±0.005% ~10%, 0.5W ~50W. grade resistance wire on thermally conductive ceramic cores. Hi-temp sili- TM Low cost, available from stock & exclusive SWIFT delivery program. cone coating provides excellent protection & solvent resistance. Tin (or SnPb) coated copper/copperweld leads ensure proper solderabilty and extended OPTIONS shelf life. Marked with resis.value & tol. as minimum (custom marking avail).  Option X: Low Inductance  Option P: Increased Pulse Capability PULSE CAPABILITY: Excellent pulse ability is inherent with the all-welded  Option F: Flameproof Coating UL94V-0 wirewound construction, but can be enhanced by a factor of 50% or more  Option ER: 100-Hour Burn-In via special Option P processing (up to 500 joules). Pulse capability is highly dependent on pulse duration, repetition rate & resis. value, consult factory.  Option B: Increased Power  Radial leads (opt.R), low thermal emf (opt.E), matched sets, custom INDUCTANCE: small sizes have inductance of 1- 50uH typ. Larger sizes marking, cut & form, Hi-Rel screening, non-standard values, high- and higher values typically have greater levels. For non-inductive design, voltage, etc. Customized components are RCD’s speciality! specify Opt. X. The max. series inductance for Opt.X resistors at 0.5MHz is DERATING (derate W/V/A ratings when ambient temp >25°C): listed in table (per MIL-R-39007). Specialty RCD Type ≤ 50Ω > 50Ω Char. U is max. power for ±0.5% typ. operational life stability & 275°C constructions are available for even lower 102X-140X 0.2μH 0.37μH hotspot; Char. V is max. power for ±3% stability & 350°C hotspot inductance levels (Opt.75 inductance= 145X-160X 0.3μH 0.6μH 100 165X-178X 0.65μH 1.2μH 50% of Opt.X, Opt.76=33%). 75 Char. V Char. U 50 Tol <0.1% 9 25 3 1.375” Min A 2 C (type 102~125 is 1.0”) D 0 -65 25 50 75 100 125 150 175 200 225 250 275 300 325 350 ↓ AMBIENT TEMPERATURE ( °C ) ↑ DIMENSIONS [Numbers in brackets are mm] Std. Wattage Opt.B Wattage Maximum 10 10 MIL Resistance 3 2 8 Ratings Ratings A C D ± .003 [.08] Voltage RCD 5 6,7 Type Range 1,6 Type Rating 110-155: ± .032 Char.U Char.V Char.U Char.V ± .062 [1.58] Std. Optional 156-190: ± .045 102 - 0.5 0.8 0.8 1.0 .01Ω - 2K 30V .16 ±.03 [4.±.8] .07±.02[1.8±.5] .020 - 110 RW81 (110B) 0.8 1.0 1.5 2.0 .01Ω - 8K 40V .24 ±.03 [6.±.8] .085 [2.16] .020 .024 (opt. 22) 115 - 1.0 1.2 1.5 2.0 .01Ω - 12K 45V .312 [7.92] .085 [2.16] .020 .024 (opt. 22) 120 - 1.0 1.2 - - .01Ω - 15K 50V .344 [8.74] .096 [2.44] .020 .024 (opt. 22) Stock 125 RW70 (125B RW80) 1.5 1.8 2.0 2.5 .01Ω - 20K 55V .385 [9.78] .096 [2.44] .020 .024 (opt. 22) 130 - 1.6 2.0 - - .01Ω - 22K 65V .530 [13.5] .096 [2.44] .020 .024 (opt. 22) 133 - 2.0 3.0 3.0 4.0 .005Ω - 20K 80V .355 [9.00] .156 [3.96] .031 .024 (opt. 22) Stock 135 RW69 3.0 4.0 4.0 5.0 .005Ω - 40K 140V .500 [12.7] .188 [4.78] .031 .024(22), .040(18) 140 RW79 3.0 4.0 4.0 5.0 .005Ω - 50K 140V .550 [14.2] .188 [4.78] .031 .040 (opt. 18) 145 - 3.5 4.5 4.5 6.5 .005Ω - 60K 180V .770 [19.6] .188 [4.78] .031 .040 (opt. 18) 150 - 3.5 4.5 5.0 7.0 .005Ω - 60K 150V .500 [12.7] .225 [5.72] .040 .032 (opt. 20) 155 - 4.0 5.0 6.0 8.0 .005Ω - 100K 210V .625 [15.9] .225 [5.72] .040 .032 (opt. 20) 156 - 5.0 6.0 - - .005Ω - 150K 300V .800 [20.3] .250 [6.35] .040 .032 (opt. 20) Stock 160 RW74 5.0 7.0 7.0 10 .005Ω - 200K 400V .875 [22.2] .312 [7.92] .040 .032 (opt. 20) 165 RW67 6.0 7.5 - - .005Ω - 220K 450V 1.000 [25.4] .312 [7.92] .040 .032 (opt. 20) 170 - 7.0 9.0 10 12 .005Ω - 300K 550V 1.200 [30.9] .312 [7.92] .040 .032 (opt. 20) 171 - 7.0 8.5 - - .005Ω - 250K 700V 1.660 [42.2] .208 [5.28] .031 .040 (opt. 18) 172 - 8.5 10 - - .005Ω - 400K 900V 2.100 [53.3] .225 [5.72] .031 .040 (opt. 18) 173 - 9.0 11 12 14 .005Ω - 400K 650V 1.550 [39.4] .300 [7.62] .040 .032 (opt. 20) Stock 4 4 175 RW68, 78 10 13 15 18 .005Ω - 500K 900V 1.720 [43.7] .350 [8.89] .040 .032 (opt. 20) 176 - 10 12 - - .005Ω - 500K 800V 1.875 [47.6] .300 [7.62] .040 .032 (opt. 20) 178 - 13 15 - - .01Ω - 750K 1150V 2.410 [61.2] .350 [8.89] .040 .032 (opt. 20) 180 RW56 14 16 16 20 .01Ω - 800K 1000V 2.100 [53.3] .500 [12.7] .040 - 185 - 20 25 - - .015Ω - 1M 1350V 2.800 [71.1] .500 [12.7] .040 - 186 - 25 30 - - .010Ω - 1M 1400V 4.060 [103] .350 [8.89] .040 .032 (opt. 20) 190 - 40 50 - - .025Ω - 2M 1500V 5.000 [127] .500 [12.7] .040 - 1 1/2 2 3 4 Working voltage=(PR) , not to exceed max rating (multiply by 0.7 for Opt.X) Allow .032” additional for Opt X, Opt 33, or values<1Ω Coating overflow onto each lead ≤2xD typ Performance is typical for Char.U with tol 5 6 7 ≤1%, & is dependent on resis, options, etc. Consult factory for Char.V & tol >1% Military p/n’s are given for reference only & do not imply qualification or exact interchangeability Increased range avail Resis value measured 8 9 at 3/8”±1/16 from each end of body Heavier lead gauge option is recommended on low values to enable lower leadwire resis., increased current, & improved TC Lead length applies to bulk packaged units (taped parts 10 generally have shorter leads, refer to taping spec.) Series 100 has dual power rating depending on temp.rise & stability requirements; derate 50% to ensure high reliability & operational life stability 4 TYPICAL PERFORMANCE P/N DESIGNATION: 135 - 102 - J B W Operational Life (Char.U) ±0.5% (±1% on Opt.B & sizes ≥10W) RCD Type Thermal Shock ±0.2% Moisture Resistance ±0.2% Options: X, R, V, P, F, ER, E, B, 76, 75, 33, 22, 20, 18 Shock and Vibration ±0.1% (leave blank if standard) Overload, 5 Sec 5x rated W 102-156, 10x W 160-190 Resis. Code 1% & tighter tols: 3 signif. digits & multiplier, Dielectric Strength: type 102-130 300V (for 500V specify opt.23) e.g. R100= 0.1Ω, 1R00= 1Ω,1000= 100Ω, 1001= 1KΩ. Dielectric Strength: type 133-190 500V (for 1KV specify opt.33) 2%-10%: 2digits & multiplier (R10= .1Ω, 1R0=1Ω,100=10Ω, Max. Current (not to exceed Resistors with .020”lead dia = 11A, 102=1K). Use extra digits as needed: R005, R0075, R012, etc. wattage or voltage rating) .024” =15A, .032” =22A, .040”=30A Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%, TCR: temp coefficient ≥10Ω 20ppm (5 & 10ppm avail.) C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%, V=.005% of resistance element, 1- 9.9Ω 50ppm (10, 20, 30ppm avail.) tol ≤1% (contact 0.1-.99Ω 90ppm (20, 30, 50 ppm avail.) Packaging: B= Bulk, T= T&R (avail. on type 102 to 176) factory >1%) . 050-.099Ω 300ppm (50, 100, 200ppm avail.) .01Ω -.049Ω 600ppm (100, 200, 300ppm avail.) Optional TC: 5= 5ppm, 10= 10ppm, 20= 20ppm, 30= 30ppm, 50= 50ppm, 101= 100ppm, 201=200ppm (leave blank if std) Termination: W=RoHS (std), Q= Tin/Lead (leave blank if both acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA039H Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 43 % RATED POWER

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products