RCD HDP220-103-JB

RoHS RESISTORS�CAPACITORS�COILS�DELAY LINES POWER THICK FILM ON STEEL RESISTORS TO126, TO220, and TO247, 25 to 100 WATT Term.W is RoHS compliant HDP SERIES & 260°C compatible FEATURES � Industry’s most economical TO-style power resistors! � Standard resistance range: 0.05Ω to 10KΩ � Standard tolerance: ±1%, ±2%, ±5% ( available to 0.1%) Award winning design! High power density at low prices! � Flame resistant construction RCD Series HDP resistors were designed to offer precision � Non-Inductive performance performance in TO-126, TO-220 and TO-247 style packages. � Resistor is electrically isolated from the mounting surface The cost effective design features an oxidized stainless steel carrier which is insulated with a proprietary hi-temp dielectric OPTIONS upon which the resistive film and solder pads are deposited. � Option P: Increased pulse capability This enables reduced thermal resistance over conventional � Option EQ: 24-hour burn-in at full rated wattage (free air) ceramic or ceramic/copper sandwich designs, resulting in � Option 33: 1KV Dielectric Stength increased power and overload capability (pulse graph avail- � Numerous design modifications are available (special able). The resistive film is insulated with a specialty flame marking, custom lead wires, hi-rel screening, etc). resistant coating offering superior environmental protection. Customized components are an RCD specialty! TYPICAL PERFORMANCE CHARACTERISTICS L% oad Life ±1 A → ← M% oisture Res.(Mil-Std-202 M106) ±0.5 F ↓ ↑ Thermal Shock (Mil-Std-202, ↑ ±0.3% Method 107 Cond.C ↑ C B O% verload (2x W, 1Sec, nte1.5x Max V) ±0.3 ↓ G ↓Tl erminal Pull Strength 5 lbs direct, 2 lbs pee ← D →← E → Temp.Coefficient 0.5Ω & above1) 00ppm (50& 80ppm opt. 0.05Ω 0.49Ω 200ppm (100ppm opt.) .120” [3] 1 .040” [1] Dielectric Strength 750V Std. (Opt.33= 1KV) 1 Insulation Resis. 1000M min. OC perating Temperature Range -55°C to +200° 1 Between two terminals and mounting surface, DCV SPECIFICATIONS DIMENSIONS Inch [mm] RCD Wattage Max. Resistance Type @ 25°C Voltage Range AB C D E F Typ. G Typ. .091±.01 .323±.012 .200±.012 .940 Min. .465±.012 .031 .098 3 3 H) DP1262V 5W (2W free air 300 0.05Ω - 10K [2.3±.25] [8.2±.3] [5.08±.3] [24] [11.8±.3] [.8] [2.5] .117±.01 .400±.012 .200±.012 0.5 Min. .600±.012 .031 .142 2 3 3 HDP220S4V 0W (2.5W free air) 300 0.05Ω - 10K [3±.25] [10.16±.3] [5.08±.3] [12.7] [15.24±.3] [.8] [3.6] .117±.01 .425±.012 .200±.012 .940 Min. .650±.012 .031 .118 3 3 H) DP2205V 0W (3W free air 300 0.05Ω -10K [3±.25] [10.8±.3] [5.08±.3] [24] [16.5±.3] [.8] [3] .156±.01 .630±.012 .400±.012 .940 Min. .820±.012 .031 .142 3 3 H) DP2471V 00W (5W free air 350 0.05Ω -10K [4±.25] [16.0±.3] [10.16±.3] [24] [20.8±.3] [.8] [3.6] 2 3 Information on HDP220S is preliminary Extended range available POWER RATING P/N DESIGNATION: HDP220 - 1001 - F B W Power rating is based on the resistor being tightly screwed to a suitable RCD Type heat sink (with thermal compound) to limit hot spot case temperature to Options: P, EQ, 33, etc (leave blank for std) 200°C. Derate wattage by .57%/°C above 25°C (as depicted in chart below). Mounting torque not to exceed 8 in-lbs. Request Applic.Guide R- Resis.Code 1%: 3 signif. figures & multiplier, (R010=.01Ω, 34 for additional information concerning heat-sink resistor mounting R100=.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K) Resis.Code 2%-10%: 2 signif. figures & multiplier, guidelines. (R01=0.01Ω, R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K) 100 Tolerance Code: J = 5%, G = 2%, F = 1% 80 Packaging: B = standard (bulk) 60 Optional Temp. Coefficient: 50 = 50ppm, 80 = 80ppm, 40 101 = 100ppm (leave blank for standard) 20 Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, 0 25 50 75 100 125 150 175 200 in which case RCD will select based on lowest price and quickest delivery) CASE TEMPERATURE (°C) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA047C Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 79 % OF RATED POWER