RCD MC1206-2803-FT

RoHS Term.W is RoHS THICK FILM CHIP RESISTORS AND JUMPERS RESISTORSCAPACITORSCOILSDELAY LINES compliant & 260°C compatible MC SERIES 50mW (0201) to 3W (2040) L ZC SERIES Zero-ohm chip (1A - 25A) T t W r Industry’s widest selection & lowest prices- RCD’s Series MC resistors utilize precision thick film technology 0.1W to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm offering inherently low inductance, exceptional reliability and superior r 0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5% performance. Heavy plating with NO LEACHTM nickel barrier assures (other sizes available from stock in many popular values) superb solderability and long shelf life. State-of-the-art production line r Option V: +175° operating temperature enables the industry’s most precise accuracies (0.25% & 50ppm!) r Option U: User-trimmable chips thereby replacing more costly thin-film chips in many applications. r Option P: Increased pulse capability RCD offers low cost offshore assembly of SM and leaded PCB’s (refer r Military screening, custom values & TC, microwave design, etc. to RCD’s Assembly Services p.114 for more information). 2 Std TC MC Dimensions Inch [mm] RCD Type Wattage Resis. Range Standard Resis. Range Standard Resis. TYPE ZC ppm/°C, Voltage 1 2 2 2 3 MC, ZC Rating ±0.5% Tol ±1% Tol Range ±5% Tol Jumper 2 L W T t typ. Rating 100 10Wto 22KW 1 Amp Max .024±.002 .012±.002 .010±.002 .006±.002 0201 .05W 200 22.1K to 1MW 10W to 1MW 25V 50mW Max. [0.6±.03] [.3±.03] [.25±.03] [.15±.05] 400 1- 9.1W ,1.1M-2.2M 100 10W to 1MW 0402 1 Amp Max .040±.004 .020±.004 .014±.004 .010±.004 .063W 200 10W to 1MW 50V Stock item 50mW Max. [1.00±.1] [.5±.1] [.35±.1] 10 [.25±.1] 400 1W to 9.76W 1- 9.1W ,1.1M-4.7M 100 10W to 1MW 10W to 1MW 0603 1.5 Amp Max .061±.005 .031±.004 .016±.006 .010±.006 .1W 200 10W to 1MW 50V Stock item 50mW Max. [1.55±.12] [.8±.1] [.40±.15] [.25±.15] 400 1W to 9.76W 1- 9.1W ,1.1M-10M 100 10W to 1MW 10W to 1MW 0805 2 Amp Max. .079±.005 .050±.006 .020±.006 .016±.008 .125W 200 1.02M to 5.6M 10W to 5.6MW 150V Stock item 50mW Max. [2.0±.15] [1.25±.15] [.50±.15] [.4±.2] 400 0.1-9.76W, 1.02M-10M 0.1- 9.1W ,1.1M-10M 1206 100 10W to 1MW 10W to 1MW .25W 2 Amp Max. .126±.008 .061±.006 .024±.006 .020±.008 Stock item 200 1.02M to 5.6M 10W to 1MW 200V .50W 50mW Max. [3.2±.2] [1.55±.15] [.61±.15] [.51±.2] 1206B 400 1W to 9.76W 1.02M-10M 0.1- 9.1W ,1.1M-22M 100 10W to 1MW 10W to 1MW 3 Amp Max. .126±.008 .098±.008 .024±.008 .020±.010 1210 .33W 200 1.02M to 5.6M 10W to 1MW 200V 50mW Max. [3.2±.2] [2.5±.2] [.6±.2] [.5±.25] 400 1W to 9.76W 1.02M-10M 0.1- 9.1W ,1.1M-22M 100 10W to 1MW 10W to 1MW 200V 3 Amp Max. .197±.008 .102±.008 .024±.008 .020±.010 2010 .75W 200 1.02M to 5.6M 10W to 1MW (250V 50mW Max. [5.0±.2] [2.6±.2] [.6±.2] [.50±.25] Opt. P) 400 1W to 9.76W 1.02M-10M 0.1- 9.1W ,1.1M-22M 100 10W to 1MW 10W to 1MW 250V 2512 1.0W 4 Amp Max. .250±.01 .125±.010 .024±.008 026±.012 200 1.02M to 5.6M 10W to 1MW ( 350V 4 2512B 2.0W 50mW Max. [6.35±.25] [3.2±.25] [.6±.2] [.65±.3] 400 1W to 9.76W 1.02M-10M 0.1- 9.1W ,1.1M-22M Opt. P) 100 10W to 1MW .201±.008 .402±.008 .024±.008 .055±.018 2040 2.0/3.0 200 10W to 1MW 350V N/A [5.1±.2] [10.2±.2] [.6±.2] [1.4±.46] 400 1- 9.1W 1 Operation at or near full rated power (especially >1W) involves consideration of mounting geometry (solder pad and trace area/thickness, etc.). Request FA2623 for suggested mounting pad layouts. 2 3 4 Extended resistance range available. Most sizes available down to 0.01W 1%. Up to 25A available. Dim. t on MC2512B is .094[2.4] maximum. TYPICAL PERFORMANCE PULSE WITHSTAND CHART (increased pulse levels avail.) 500 Thermal Shock (-55° to +125°C) 0.2% ΔR Overload (2.5x W, 5S, NTE 2x rated V) 1% ΔR Low Temp. Operation (-55°C) 0.2% ΔR 100 High Temp. Exposure (125°C, 100hrs) 0.5% ΔR Resistance to Solder Heat 0.2% ΔR Moisture Resistance 0.5% ΔR MC2512P MC2010P Load Life(1000 hrs.) 1 .0% ΔR 10 MC1210P Operating Temp. (+175°C Opt. V) -55 to +155°C MC1206P Derating (above 70°C) Derate W & V by 1.18%/°C MC0805P MC0603P MC0402P 1 1uS 10uS 100uS 1mS 10mS 100mS Pulse Duration P/N DESIGNATION: MC 1206 - 2210 - F T W Pulse capability is dependent on res. value, waveform, repeti- RCD Type: MC or ZC tion, etc. Chart is a general guide for Opt. P version, single or in- Chip Size: 0201 to 2040 frequent pulses, with peak voltage levels not exceeding 150V for Options: U, P, etc. (leave blank if std) 0402 & 0603 size, 300V for 0805, 400V for 1206 & 1210, 450V Resis. Code: 0.25% to 1% Tol: 3 signif. digits & multiplier for 2010 & 2512. Max pulse wattage for standard parts (w/o (R100= .1W, 1R00=1W, 10R0=10W, 1000=100W 1001=1KW) Opt.P) is 50% less, max pulse voltage is 50V less. Increased 5% Tol: 2 signif. digits & multiplier (R10=.1W, 1R0=1W, 100=10W, pulse levels available. For improved performance and reliability, 101=100W 102=1KW). Leave blank on ZC zero-ohm chips. pulse derating factor is recommended (30-50% typ., refer to #R- Tolerance: J=5%, F=1%, D=0.5%, C=0.25% Leave blank on ZC 42). Verify selection by evaluating under worst-case conditions. zero-ohm chips. Opt.U trimmable chips W=±15%, M=±20%, U=0 to -30%. Packaging: B=Bulk, T=Tape & Reel Optional TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std) Termination: W = Lead-free (std), Q = Tin/Lead (leave blank if both acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA033G Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 16 Peak Power (Watts)