RCD MWM3S-2000-FT

RoHS RESISTORS�CAPACITORS�COILS�DELAY LINES SM POWER RESISTORS, 1/2W - 5W, .0005Ω Ω Ω Ω Ω - 1MΩ Ω Ω Ω Ω WIREWOUND, FILM, & METAL PLATE Term.W is RoHS compliant MWM SERIES & 260°C compatible Exceptional perfomance and reliability is � Widest selection in the industry! achieved via highest grade materials and � Tolerance to ±0.01%, T.C. to ±5ppm/°C TM processing. An all-welded wirewound construction is standard, � Available on exclusive SWIFT delivery program! featuring premium-grade wire for superior stability and surge capability. Opt. L low profile models feature a non-inductive metal OPTIONS plate element. The power film version (Opt.M) achieves values as high � Option X: Non-inductive (refer to application note below) as 1MΩ and is inherently low inductance thereby enabling stable � Option P: Increased Pulse Capability operation at high frequencies. � Option M: Power metal film element � Option L: Low profile non-inductive metal plate design PERFORMANCE(e Typ)Wt W & Opt. L Metal Plat Opt. M Film Elemen � Option E: Low thermal EMF design L% oad Life (1000 hrs)±) 1(% MWM2S,3S,27=2% ±1 � Special marking, high current, flame retardant, fusible, M% oisture Resistance±% 0.25 0.5 temp.sensitive, hi-rel screening/burn-in, fusible, SnPb, etc. T% emperature Cycling±% 0.2 0.5 Sc hort Time Overload5c x rated W for 5 Se 5 x rated W for .5 Se Temp. CoefficientSl tandard OptionaSl tandard Optiona A C R0005-R024 400ppm 100, 200 n/a n/a R025-R049 30 00ppm 100, 20 n/a n/a ↑ R050-R099 200ppm 50, 100 n/a n/a B ↓ R100-R990 90ppm 20,30,50 350ppm 200 ------ ------ ↓ 1R00-9R90 50ppm 10,20,30 200ppm 100 ↑ → ← D .010” MWM2 & 3S, .050” MWM3 & 5 ← E → 10R0 & above 30ppm 5,10,20 100ppm 25,50 1 1 ← G → Dielectric Strength 500V Min.,) 1KV avail. 500V Min. (1KV avail. 2 ↑ Solderability9e 5% coverage 95% coverag SUGGESTED H F O) perating Temp.-C 55 to +175°C(+275° avail -55°C to +175° PAD LAYOUT ↓ A% vailable Resis. Tol.0% .01% to 10 0.5% to 5 1 2 Dielectric strength for low profile Opt. L is 100V ( 300V avail) Tested within .032" [.8mm] of pcb surface Max Opt M Opt M DIMENSIONS Inch [mm] Wattage Std Resis RCD TYPE Voltage* Resis Max. Rating Range [Current] Range Voltage AB (Max) CD (Min) EF G H MW WM1/20] .531 3V [10A .0 Ω-5 2K Ω-* 1M2] 00V.] 204±.02 [5.2 ±.5.] 111 [2.82.] 125±.01 [3.2±.25.] 025 [.63.] 045±.015 [1.14±.4.] 080 [2.0.] 100 [2.5 .08 [2 MW WM11]51 8V [20A .00 Ω-1 10K . Ω-* 1M2] 00V.] 258±.02 [6.55±.5.] 125 [3.17.] 150±.015 [3.8±.4.] 032 [0.8.] 060±.015 [1.50±.4.] 100 [2.5.] 125 [3.2 .12 [3 MW WM22]12 20V [30A .00 Ω-1 25K . Ω-* 1M2] 50V.] 449±.032 [11.4±.8.] 208 [5.28.] 225±.015 [5.7±.4.] 060 [1.5.] 070±.020 [1.78±.5.] 160 [4.0.] 157 [4.0 .20 [5 MW WM2S2]81 0V [25A . Ω- 200Ω 1Ω-* 1M2] 50V.] 297 ±.020 [7.5 ±.5.] 165 [4.19.] 150±.015 [3.8±.4.] 044 [1.1.] 050±.016 [1.27±.4.] 100 [2.5.] 125 [3.2 .14 [3.6 MW WM272] .715 80V [30A .00 Ω-1 20K Ω-* 1M2] 50V.] 480±.032 [12.2±.8.] 230 [5.84.] 228±.016 [5.8±.4.] 05 [1.27.] 070±.020 [1.78±.5.] 160 [4.0.] 18 [4.57 .20 [5 MW WM3S3]25 00V [30A .00 Ω-1 25K Ω-* 1M3] 00V.] 625±.032 [15.9±.8.] 270 [6.86.] 275±.015 [7±.38.] 05 [1.27.] 085±.016 [2.16±.4.] 160 [4.0.] 175 [4.5 .40 [10 MW WM33] .525 50V [30A .00 Ω-1 50K Ω-* 1M3] 50V.] 811±.020 [20.6±.5.] 295 [7.49.] 273±.02 [6.9 ±.5.] 063 [1.6.] 102±.028 [2.6 ± .7.] 200 [5.0.] 200 [5.0 .60 [15 MW WM55]35 00V [32A .00 Ω-a 100Kna /n] /.] 811±.020 [20.6±.5.] 295 [7.49.] 273±.02 [6.9± .5.] 063 [1.6.] 102±.028 [2.6 ± .7.] 250 [6.4.] 250 [6.4 .60 [15 LOW PROFILE METAL PLATE MODELS MW WM1/2L 0.5 √(PR) [12A] .003Ω-.05Ωna /an] /.] 200 ±.012 [5.1 ±.3.] 053 [1.35.] 100±.01 [2.54±.25.n 025 [.63.] 060 [1.5] mi.] 080 [2.0.] 100 [2.5 .08 [2 MW WM1L 1 √(PR) [25A] .001Ω-0.1Ωna /an] /.] 250 ±.012 [6.3 ±.3.] 057 [1.45.] 126 ±.012 [3.2 ±.3.n 025 [.63.] 070 [1.8] mi.] 150 [3.8.] 125 [3.2 .120 [3 MW WM2L 2 √(PR) [30A] .002Ω-0.2Ωna /an] /.] 330±.012 [8.38±.3.] 057 [1.45.] 157 ±.012 [4.0 ±.3.n 032 [0.8.] 100 [2.5] mi.] 197 [5.0.] 157 [4.0 .157 [4 MW WM2LS 2 √(PR) [45A] .0005 -.005Ωna /an] /.] 250 ±.012 [6.3 ±.3.] 079 [2.0.] 126 ±.012 [3.2 ±.3.n 032 [0.8.] 080[.20] mi.] 150[3.8.] 125[3.2 .120[.3 *Voltage determined by E = , E not to exceed maximum voltage rating. Increased ratings available. Multiply by 0.7 for Opt. X √PR APPLICATION NOTES: P/N DESIGNATION: MWM2 - 1001 - F T W RCD Type 1. Power Rating: Resistors may be operated up to full rated power with consideration of mounting density, pad & trace geometery, PCB material, and Options: X,P,M,L,F,E (leave blank if std) ambient temperature. Standard parts should be derated (W&V) by .67%/°C Resis.Code .01%-1%: 3 signif. figures & multiplier, when ambient exceeds 25°C, low profile parts by 1%/ °C above 70 °C e.g. R010=0.01Ω, R100=0.1Ω, 1R00=1Ω, 1000=100Ω, 1001=1K. Resis.Code 2%-10%: 2 signif. figures & multiplier, R01=0.01Ω, 2. Inductance: Standard wound parts are 1 - 20uH typ. For “non-inductive” R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K. design, specify Opt.X (0.2uH max ≤50Ω, .37uH >50Ω, 50nH avail). Opt. L Use extra digits as needed: R005, R0075, R012, etc. (metal plate element) and Opt.M (power film element) are inherently low Tolerance Code: K=10%, J=5%, H=3%, G=2%, F=1%, inductance (1 to 10nH typ). Consult factory for assistance. D=0.5%, C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01% 3. Pulse Capability: standard MWM (wirewound) and Opt. L (metal plate) Packaging: B = Bulk, T = Tape & Reel offer excellent overload capability greatly exceeding that of film resistors. TC (leave blank if standard): 5 = 5ppm, 10 = 10ppm, 20=20ppm, The overload level can often be economically enhanced by a factor of 50% 30=30ppm,50=50ppm, 101=100ppm, 201=200ppm, 301=300ppm or more via special processing (Opt.P). Pulse capability is highly dependent Termination: W= Lead-free, Q= Tin/Lead. Leave blank if either is on size & resistance (available up to 50 joules). Consult factory for assistance. acceptable (RCD will select based on lowest price and quickest delivery). - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA015J Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 23 RCD MWM2 100Ω Ω Ω Ω Ω 1%