RCD OA5A-R005-FB

RoHS OPEN-AIR LOW VALUE CURRENT SHUNT RESISTORS RESISTORSCAPACITORSCOILSDELAY LINES 0.001Ω to 0.15Ω, 1 WATT to 5 WATT New narrow profile design Term.W is Pb-free offers significant space and RoHS OA SERIES savings! compliant  Industry’s widest range and lowest cost! RCD’s OA series offers cost-effective performance for a wide range of 3  Tolerances to ±0.5%, TC’s to ±20ppm current shunt/sense applications . The non-insulated open-air design fea- TM  Available on exclusive SWIFT delivery program! tures non-inductive performance and excellent stability/overload capacity.  Option S: Axial lead (unformed element) Numerous design modifications and cutom styles are available... current  Option E: Low Thermal EMF ratings up to 100A, surface mount designs, military screening/burn-in,  Option A: Stand-offs formed into lead wires marking, insulation, intermediate values, etc. Custom shunts have been  Optional pin diameters and pin spacing an RCD specialty over 30 years! Contact factory for assistance. Option ‘A’ Stand-offs: 2 B For stand-off, specify Opt. A Stand-off width = C+.01” (e.g. OA2BA, OA5AA). Resis. value [.25] min is measured at bottom of stand-off. .125±.062 Solderable to within .11±.04 .062” [1.57] of element. [2.8±1] [3.2± 1.6] .150” Resis. value measured Typical* .15 [3.8] Min. min. .062” [1.57] from element. A C Typical shape depicted--actual shape may vary within envelope given. Resis. value is .375 .375 tested 3/8” from Overall length not to exceed Dim.A +.12” [3]. Dimensions in inches [mm]. D [9.5] [9.5] body * Most values are .125 [3.2] wide, lowest 2W-5W are .187 [4.75] wide, highest 1W-2W values are .062 [1.6] wide Option ‘S’ Straight Axial Lead Design (lead length = 1.25” [31.8] min) SPECIFICATIONS 1 Current Rating A (lead spacing) ±.040 [1] C (lead diameter) RCD Power Resistance 2 B Max. D Max. 1 Type Rating Range With Std.Lead With Opt. Lead Standard Option 80 Option 27 Standard Optional 2 OA1A 1W 14A 17A .001Ω-.08Ω .40 [10.5] .2 [5] .275 [7] .35 [8.9] 20AWG 18AWG (Opt. 18) 1.20 [30.5] 2 OA1B 1W 17A 14A .001Ω-.08Ω .45 [11.4] .2 [5] .275 [7] .30 [7.6] 18AWG 20AWG (Opt .20) 1.20 [30.5] 2 OA2A 2W 22A 24A .001Ω-.1Ω .40 [10.5] .2 [5] .275 [7] .70 [17.8] 20AWG 18AWG (Opt. 18) 1.95 [49.5] 2 OA2B 2W 24A 22A .001Ω-.1Ω .60 [15.2] .2 [5] .275 [7] .60 [15.2] 18AWG 20AWG (Opt .20) 1.95 [49.5] 2 OA3A 3W 26A 24A .001Ω-.12Ω .60 [15.2] .2 [5] .275 [7] .90 [22.9] 18AWG 20AWG (Opt .20) 2.50 [63.5] 2 OA5A 5W 32A 40A .0025Ω-.15Ω .80 [20.3] .2 [5] .275 [7] 1.0 [25.4] 18AWG 16AWG (Opt. 16) 2.94 [74.7] 1 Units not to exceed wattage or current rating, whichever is less. Current rating is based on standard lead diameter, increased ratings available. 2 Dim.B applies only to parts formed to the standard lead spacing (increase accordingly for options 80 & 27). Custom pin spacings are available. 3 OA series not recommended for use in high vibration environments (encased designs such as LOR and ULV are preferable). TYPICAL OPERATING CHARACTERISTICS: STANDARD RESISTANCE VALUES AND CODES TEMPERATURE RANGE: -55 to +275°C Intermediate values available, most popular values listed in bold: DERATING: derate power & current rating by 0.4%/°C above 25°C .001Ω (R001), .0015Ω (R0015), .002Ω (R002), .0025Ω (R0025), .003Ω(R003), OVERLOAD: 5 x rated power for 5 seconds .005Ω (R005), .0068Ω (R0068), .0075Ω (R0075), .0082Ω (R0082), .01Ω (R010 if LOAD LIFE @ 25°C (1000 hrs): 1%∆R ≤1%,R01 ≥2%), .012Ω (R012), .015Ω (R015), .02Ω(R020 if ≤1%, R02≥2%), .022Ω MOISTURE No Load (1000 hrs): 1% ∆R (R022), .025Ω (R025), .03Ω (R030 if ≤1%, R03 ≥2%), .033Ω (R033), .04Ω (R040 INDUCTANCE: 10 to 25nH if≤1%, R04 ≥2%), .05Ω (R050≤1%, R05≥2%), .068Ω(R068), .07Ω (R070 if ≤1%, TEMP. CYCLING -40°C to+125°C (1000 cycles): 1% ∆R R07 ≥2%), .075Ω (R075), .08Ω (R080 if≤1%, R08 ≥2%), .1Ω (R100 if≤1%, R10 ≥2%). TOLERANCE AND T.C. OPTIONS P/N DESIGNATION: OA2A - R001 - J B W RCD Type Temp. Coef. (ppm/°C) Tol. Range Resistance Range Design Options: S=unformed, E= low Typical Best Avail.* thermal EMF, A=standoffs. Leave blank if std. .001 to .0049Ω Lead Spacing Option: 80=.2” [5mm], 3% to 10% 900ppm 200ppm (OA5A=.0025 to .005Ω) 27=.275”[7mm]. Leave blank if std. Lead Diameter Option: 20=20AWG, 18=18AWG, .005 to .0099Ω 1% to 10% 600ppm 100ppm 16=16AWG. Leave blank if standard. (OA5A=.006 to .015Ω) Resis.Code (see table): R01, R010, R100, etc. .010 to .024Ω 1% to 10% 200ppm 50ppm Tolerance Code: D=0.5%, F=1%, G=2%, H=3%,J=5%, K=10% (OA5A=.016 to .025Ω) Packaging: B = bulk (std), T=Tape & Reel (T&R only available on option S) .025 to .049Ω 1% to 10% 100ppm 30ppm TC (see table for options): 20=20ppm, 30=30ppm, 50=50ppm, .05 to .10Ω 1% to 10% 50ppm 20ppm 101=100ppm, 201=200ppm, 301=300ppm. (leave blank if standard) * TC options vary depending on size and value (consult factory for availability) Termination: W=Lead-free, Q=Tin/Lead (leave blank if either is acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA007E Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 56