RCD PW15-7201-FBW

RoHS RESISTORS�CAPACITORS�COILS�DELAY LINES GENERAL PURPOSE 1W TO 25W RCD PW15 100Ω 5% CERAMIC-ENCASED RESISTORS Term.W is RoHS RCD PW7A 10KΩ 5% compliant PW SERIES & 260°C compatible PW resistors are designed for general purpose and semi-precision � Low cost and the industry’s broadest selection! power applications. The fireproof ceramic construction provides � Available from stock in popular sizes (5W & 10W, 0.1Ω to 5K) and selected values in other sizes; non-stock items are excellent thermal conductivity and resistance to moisture & solvents. TM available on exclusive SWIFT delivery program Typical marking is ‘RCD’, value, tol. &wattage (or type). The resistance element is wirewound on lower values, & power film on higher values � Tolerance to ±0.05%, TCR to ±5 ppm/°C depending on options (opt. P & T parts are always WW). If a specific � Wide resistance range: .05Ω to 1MegΩ construction is preferred, specify opt.WW or M (not avail. in all values). � Tape & Reel available up to 10W size (Opt.A not avail. on T&R) APPLICATION NOTE #1: Resistor Comparison OPTIONS Series PW resistors offer moderate performance levels at prices � Option X: Non-inductive (PW5X & smaller: ≤50Ω =0.2uH max, below that of other WW or film technologies. Other choices for >50Ω= 0.37uH max; PW7X & larger: ≤50Ω=0.3uH max, medium power applications are Series PV resistors (2W to 10W, >50Ω= 0.6uH max). Reduced inductance levels available similar to PW in vertical package); Series 100 military grade WW � Option T: Temp. sensitive (up to +6000ppm/°C) (1/2W to 50W, offers improved performance, pulse capability, and � Option P: Increased pulse capability reliability); Series RW (1W to 5W WW, offers space savings); and 4 � Option FF: Fuse within 10S at 30x rated W and within 45S Series RSF/RMF power film (1/2W to 9W, offers reduced inductance). at 20x rated W (1Ω to 1K). Custom fusing characteristics avail. � Option B: Increased power APPLICATION NOTE #2: Temperature Rise � Option A: Standoffs built into ceramic case Power resistors reach elevated temperatures (typically 125° to 250°C) � Additional options available... burn-in, special marking, non- when operated at full wattage, so when utilizing above 50% power standard values, increased voltage, longer or heavier gauge rating, the bodies should be mounted off the PCB with adequate leads, specialty lead wire material/plating/insulation, cut & formed clearance from heat sensitive components. Opt. A standoffs are leads, etc. Customized components are an RCD specialty! helpful in preventing heat transfer to PCB. 1.00” Min PW1,2 Rated ← B→ A Wattage DIMENSIONS Inch [mm] Resis. 1.12” Min PW3,5 RCD Continuous 1.25” Min PW7-25 Range E ↑ Type ↓ Opt. Working B C D E C Std. (0.05Ω Ω Ω Ω Ω - A (Max.) 1 ↑ B Voltage ±.032 [.81] ±.05 [1.3] Max. ±.004 [.1] ↓ 2 P1 W1 210 M 10.] 62 [15.8].] 25 [6.4.A 25 [6.4N] / .028 [.7 ↑ Option A 2 P2 W2 310 M 10 .[ 72 [18.3] .] 2767 .8 .[ 26] .8].] 39 [4.9 .028 [.7 D (standoffs) ↓ 2 3 P3 W3 510 M 15 .[ 91 [23.1] .] 317] .9.] 31 [7.9.] 43 [10.9 .031 [.8 2 3 PW5 5 7 1M 200 .91 [23.1] .] 38 [ 9.7 .35 [8.9] .47 [11.9] .031 [.8] Stock 3 P7 W7 1M 0103] 5 1[ .42 [36 .] 389] .7.] 35 [8.9.] 52 [13.2 .031 [.8 DERATING CURVE: 3 PW10 10 - 1M 500 1.96 [50] .38 [ 9.7] .38 [9.7] .52 [13.2] .031 [.8] Stock (derate W/V/A when ambient temp. > 25°C) 100 3 P5 W151-30 0K5] 41] .96 [50.] 50 [12.7.] 50 [12.7.] 68 [17.2 .031 [.8 75 3 P0 W202-40 0K6] 02x .55 [65.] 58 [14.7] ma.] 50 [12.7.] 70 [17.8 .031 [.8 50 3 25 P2 W222-40 0K6] 52x .55 [65.] 58 [14.7] ma.] 50 [12.7.] 70 [17.8 .031 [.8 0 3 P5 W252-40 0K7] 02x .55 [65.] 58 [14.7] ma.] 50 [12.7.] 70 [17.8 .031 [.8 -55 25 50 100 150 200 250 300 1 Maximum voltage rating is determined by E= PR, E should not exceed value listed. 235°C AMBIENT TEMPERATURE (°C) 2 3 Specify opt. 59 for double voltage rating. Specify opt.18 for 18AWG (.040”) diameter leads. TYPICAL PERFORMANCE FOR SERIES PW P/N DESIGNATION: PW10 - 100 - J B W 1 Temperature 1Ωa. nd above 100ppm/°C typ., 300ppm max RCD Type Coef T25 -T100 1 Options: X, WW, T, P, M, FF, B, A, 59, 18 0.05Ω to 1Ω 200ppm/°C typ., 600ppm max. (Leave blank if standard) 2 O5 perating Temp. -5 ° to +235° C Resis.Code .05%-1%: 3 signif. figures & multiplier, R100=0.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K. Tm erminal Strength 5 lbs. minimu Resis.Code 2%-10%: 2 signif. figures & multiplier, DV ielectric Strength 1000 R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K. If necessary, use additional (significant) digits, e.g. R005 5( Sec. overload ≤1) .5x max V) 3X rated wattage (Opt. WW = 5X for 0.005Ω, R0075 for 0.0075Ω in any tolerance. 3 M% oisture Resistance 3.0 Tolerance: K=10%, J=5% (std), H=3%, G=2%, 3 F=1%, D=0.5%, C=0.25%, B=0.1% H% igh Temp. Exposure 1.0 Packaging: B=Bulk (standard), T= Tape & Reel 3 L% oad Life (1000 hours) 3.0 Temp. Coefficient (leave blank for standard TC): 5=5ppm, 3 T% emperature Cycling 2.0 10=10ppm, 20= 20ppm, 50=50ppm, 101=100ppm, 201=200ppm 3 S% hock and Vibration 1.0 Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery) 1 2 3 TC to 5ppm available >10Ω, 10ppm 1-10Ω, 20ppm 0.1-1Ω 275°C avail Tightened 4 performance avail Opt FF max fault nte 1.5x RCWV or 200x W rating - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA040G Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 47 % OF RATED POWER