RCD RG1/4-1006FT101W

RoHS RESISTORS�CAPACITORS�COILS�DELAY LINES HIGH VALUE & HIGH VOLTAGE CYLINDRICAL RESISTORS Term.W is RoHS RG SERIES - General Purpose compliant & 260°C compatible RH SERIES - High Precision U U U U U RP SERIES - Professional Grade Internal construction of RP Series (non-inductive serpentine film) RCD’s high voltage thick-film resistors represent the most advanced technology in the � Industry’s widest range of high value/ high voltage resistors- 13 industry. Series RG is designed for semi-precision applications, offering a low cost 1/8 ~ 20W, 1KΩ~ 10 Ω, 300V~ 90KV, TC’s to ±15ppm, ±0.05%~ 10% solution up to 15KV. Series RH features a special composition and processing to � Available on Tape & Reel (sizes <2.5” long) achieve improved tolerance, TC, & voltage (60KV). Series RP utilize highest grade OPTIONS materials enabling tightest tolerances, lowest VC’s, TC’s to 15ppm, and superior Options include formed leads, matched sets, custom marking, burn-in, power/temp/voltage levels (90KV). RP utilize serpentine film pattern for lowest vacuum/space operation, custom sizes, etc. Opt. P = high pulse design, inductance. Units are printed or banded with resistance value and tolerance as Opt.H= increased voltage, Opt.B=increased power, Opt.58=hermetic minimum. seal. The ruggedness of these models enables superior long term reliability, especially in 1.35” min (1.06” on d ±.004 ← L → → D ← 1/2W and smaller) demanding applications such as military, space, and medical equipment, as well as ↓ ↑ electron microscopes, high impedance amplifiers, electrometer, radiation testers, etc. 3 6 9 RW Gae ttageVc oltagD] ielectri Dimensions Inch [mm Standard Resistance Range**(K=10 , M=10 , G=10 ) SC eries@* 25°Rh atingSL trengt D d 2m 5ppm5m 0pp1m 00pp2m 00pp 350pp RW G1/81V /8 3V 005] 00.] 134 ±.04 [3.4±1.0.] 067 ±.025 [1.7 ± 0.64.A 020 [.5 NM /1M M-101M M-3001M M-300 1M-300 RW G1/41V /4 5V 005] 00.] 256 ±.04 [6.5±1.0.] 098 ±.025 [2.5 ± 0.64.A 024 [.6NM /1G 00K-501G 00K-31G 00K-3 100K-3 RW G1/21V /2 1V K5] 00.] 368 ±.04 [9.4±1.0.] 134 ±.032 [3.4 ± 0.81.A 025 [.64NM /1G 00K-501G 00K-31G 00K-3 100K-3 RW G1S1V1V .5K5] 00.] 472 ±.05 [12.0±1.3.] 158 ±.032 [4.0 ± 0.81.A 028 [.7NM /2M 00k-502M 00K-1002M 00K-300 200K-300 RW G1 1V2V K1] K.] 581 ±.05 [14.8±1.3.} 216 ±.032 [5.5 ± 0.81.A 031 [.8NM /2M 00k-502M 00K-1002M 00K-500 200K-500 RW G2 2V5V K1] K1] .06 ±.062 [26.9±1.6.} 275 ±.032 [7.0 ± 0.81.A 031 [.8 NA / N* / ***G 1M-1.5 RW G3 3V1V 0K1] K1] .67 ±.062 [42.4±1.6.} 275 ±.032 [7.0 ± 0.81.A 031 [.8 NA / N* / ***G 1M-1.5 RW G4 4V1V 5K1] K2] .05 ±.062 [52.1±1.6.] 335 ±.032 [8.5 ± 1.02.A 040 [1 NA / N* / ***G 1M-1.5 3 6 9 12 RW Hae ttageVc oltagD] ielectri Dimensions Inch [mm Standard Resistance Range** (K=10 ,M=10 ,G=10 ,T=10 ) SC eries@* 25°Rh atingSL trengt D d 2m 5ppm5m 0pp1m 00pp 200pp ≥ ≥ ≥ ≥ ≥400ppm RW H1/81V /8 5V 005] 00.] 240±.04 [6.1±1.0.] 085±.025 [2.16±0.60M .024 [.61M 00K-505M 0K-1001M 0K-1001G 0K-500 500M-4 RW H1/41V /4 7V 505] 00.] 354±.04 [9.0±1.0.] 118±.04 [3.00±1.00M .024 [.61M 00K-1001M 00K-1001G 0K-3001G 0K-1 1G-5 RW H1/21V /2 1V 5005] 00.] 500±.04 [12.7±1.0.] 180±.04 [4.57±1.00M .031 [.81M 00K-1001G 00K-1001G 00K-11G 00K-5 1G-5 RW H11V2V 0001] K.] 571±.04 [14.5±1.0.] 180±.04 [4.57±1.00M .031 [.81M 00K-1001G 00K-5001G 00K-21G 00K-15 15G-50 1 RW H22V5V 0001] K1] .00±.08 [25.4±2.0.] 265±.05 [6.73±1.3.M 031/.04 [.8/11M 00K-1001G 00K-5001G 00K-21T 00K-100 100G-3 2 RW H33V1V 0K1] K1] .65±.08 [41.9±2.0.] 265±.05 [6.73±1.3.M 031/.04 [.8/11M 00K-1001G 00K-5001G 00K-21T 00K-100 100G-10 RW H44V1V 5K1] K2] .05±.08 [52.1±2.0.] 320±.05 [8.13±1.3.- 031/.04 [.8/1 1G 00K-500M1G 00K-21- 00K-10 RW H66V2V 0K1] K3] .03±.08 [77±2.0.] 320±.05 [8.13±1.3.- 031/.04 [.8/1 5G 00K-500M5G 00K-21- 00K-10 RW H101V 0 3V 5K1] K4] .70±.12 [119.4±3.1.] 320±.05 [8.13±1.3.- 031/.04 [.8/1 1G M-500M1G M-21- 00K-10 RW H161V 6 6V 0K1] K7] .48±.12 [190±3.1.] 320±.05 [8.13±1.30- .04 [1.0 1G M-500M1G M-21- 00K-10 1 2 RH2 is available in 400ppm TCR from 100G to 300G, 300G-600G is 1000ppm, 600G-3T is 1500ppm RH3 is available in 400ppm TCR from 100G-600g, 600G-1T is 1000ppm, 1T-10T is 1500ppm 3 6 9 RW Pae ttageVc oltagD] ielectri Dimensions Inch [mm Standard Resistance Range**(K=10 , M=10 , G=10 ) SC eries@* 40°Rh atingSL trengt D d 1m 5ppm2m 5pp5m 0pp1m 00pp 200pp RW P43V .8 1V 5K1] K1] .063±.04 [27.0±1.0.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 101G K - 101G K - 10 1K - 10 RW P5 5V2V 1K1] K1] .457±.04 [37.0±1.0.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 151G K - 151G K - 15 1K - 15 RW P87V .5 3V 0K1] K2] .047±.05 [52.0±1.3.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 201G K - 201G K - 20 1K - 20 RW P101V 0 4V 5K1] K3] .071±.06 [78.0±1.5.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 301G K - 301G K - 30 1K - 30 R4 P11V 3.5W6V 0K1] K4] .000±.06 [101.6±1.5.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 401G K - 401G K - 40 1K - 40 RW P161V 6 7V 2K1] K4] .800±.06 [121.9±1.5.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 501G K - 501G K - 50 1K - 50 RW P202V 0 9V 0K1] K5] .984±.06 [152.0±1.5.] 315 ±.025 [8.0±.64.G 031 [.791G K - 11G K - 601G K - 601G K - 60 1K - 60 1/2 * Maximum working voltage is DC or AC RMS (50-60Hz sinusoidal) and is determined by E= (PR) , E not to exceed value listed in column above. **Consult factory for res. values outside the standard range CUSTOM DESIGNS SPECIFICATIONS (Typ.) Rs G SeriesRs H Serie RP Serie Increased Ratings - increased power and voltage ratings are available with O* perating Temp. Range-* 55 to +155°C-* 55 to +155°C -55 to +225°C special processing. By specifying Opt.H on RG series, voltage ratings are Tl olerances 1% %-10%, 0.1% avai0% .1%-5 0.05%-5 increased by 100% (by 50% on sizes 2W-4W). Cy oating Ey pox Ee pox Silicon Matched Sets and Networks - cost savings up to 50% can often be achieved Iw nductance Lw o Le o Non-Inductiv by specifying tight matching requirements instead of tight tol. and TC reqts. Resistance matching to 0.02% and TC tracking to 5ppm is available. O% verload (1.5xW, 5S, nte 1.5xV) ±1 ΔR% ±0.5 ΔR% ±0.25 ΔR Threaded Terminations - resistors are available with tapped end caps for L% oad Life (1000 hours) ±2 ΔR% ±0.5 ΔR% ±0.4 ΔR series combination into virtually any voltage or resis. value. M% oisture Resistance ±2 ΔR% ±0.5 ΔR% ±0.25 ΔR Hermetic-Sealed Construction (Opt. 58) - Available on RH1, RH2, & RH3 VG oltage Coefficient <1 Ω-V 10ppm/ V-V 5ppm/ -0.3ppm/ for use in harshest environments. Add .08” to dia. & .18” to length. (G VC = ppm/V) 1 Ω - 10GΩ-V 30ppm/ V-V 20ppm/ -1.5ppm/ P/N DESIGNATION: 10G - 7TΩNV /A-V 100ppm/ -2ppm/ RH2 - 1005 - F T 50 W RCD Type * Extended temperature range available ** Tinned copper leads avail. on Series RP (specify Opt.25) Options: P, H, B, 58, etc. (leave blank if std) 4-Digit Resis. Code 0.1%-1%: 1001=1K, 1002=10K, 1003=100K, 1004=1M, 1005=10M, 1006=100M, 1G00=1GΩ, 10G0=10G, DERATING 100G=100G, 1T00=1TΩ, 10T0=10T 100 3-Digit Resis. Code 2%-10%: 102=1K, 103=10K, 104=100K, 105=1M, 75 106=10M, 107=100M,1G0=1G, 10G=10G, 100G=100G,1T0=1TΩ, 10T=10T RP Tolerance: J=5%,G=2%,F=1%,D=.5%,C=.25%,B=.1%,A=.05% 50 RG,RH Packaging: B = Bulk, T = Tape & Reel 25 TC: 15=15ppm, 25 =25ppm, 50 =50ppm, 80 = 80ppm, 101 =100ppm, 0 201=200ppm, 351=350ppm, 401=400ppm, 102=1000ppm, 152=1500ppm) 25 50 75 100 125 150 175 200 225 AMBIENT TEMPERATURE (°C) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA036C Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 69 % RATED POWER U U U U U