RCD ZJ1-T

RoHS RESISTORS�CAPACITORS�COILS�DELAY LINES ZERO-OHM JUMPERS, 2A to 25A Term.W is RoHS compliant & 260°C ZJ SERIES - INSULATED compatible Z SERIES - UNINSULATED � Industry’s widest range of zero-ohm jumpers � Low cost, delivery from stock � Commercial & military applications � 3 standard styles- insulated, uninsulated, & surface mount (also refer to ZC Series for thick- RCD “zero-ohm” jumpers were developed for use as interconnection devices between points on a PCB when separated by circuit paths, or when the pcb film chip jumpers and ZCF for cylindrical MELF) layout has been changed requiring new point connections. Specify ZJ Series � Horizontal and vertical tape & reel available (insulated bodies) when jumpers are in close proximity with conductor paths. � Custom models to 50A available Specify Z Series (uninsulated tin plated copper) for circuits involving higher current levels. In addition to the 4 standard wire sizes listed (18-22 awg), Series Z is available in a wide range of custom sizes (12-26awg). RCD’s .95 [24] Min. L D d Z1206 SM jumper achieves the industry’s highest current rating in a 1206- size due to the heavy duty tin plated copper element. The ultra low resistance Inch [mm] of type Z1206 (.00012Ω) is 25-400 times better than conventional models! Z1206 is formed into a U-shape to provide 500V isolation clearance. SERIES ZJ INSULATED JUMPER SPECIFICATIONS RCD Military L D d Maximum Amp. Rating Dielectric Operating Temp. Qty per Type Type ±.015 [.4] ±.012 [.3] ±.003 [.08] Resistance @70°C* Strength Range Reel, Typ. Z] J1 .] 145 [3.4.] 061 [1.55.2 020 [.5 .0 Ω 2V A3C 00-0 55 to +155° 500 Z2 J1BA] A5550.] 145 [3.4.] 061 [1.55.1 020 [.5 .0 Ω 5V A3C 00-0 55 to +155° 500 Z] J2 .] 250 [6.4.] 090 [2.3.2 024 [.6 .0 Ω 3V A5C 00-0 55 to +155° 500 Z1 J2BA] A5550.] 250 [6.4.] 090 [2.3.1 024 [.6 .0 Ω 1V 0A5C 00-0 55 to +155° 500 Z] J3 .] 335 [8.5.] 110 [2.8.2 025 [.63 .0 Ω 5V A5C 00-0 55 to +155° 400 * Increased current ratings available .126±.008 [3.2±0.20] 2.36 ±.12 [60 ±3]* .050±.008 [1.27±0.20] .200 d [5] .016±.002 [.40±0.05] 2.06 [52.4] std, 26-100mm avail. .062±.004 [1.57±0.10] * Lengths from 0.2” to 6” [5 to 152mm] are avail. SERIES Z UNINSULATED JUMPER SPECIFICATIONS SERIES Z1206 SM JUMPER SPECIFICATIONS Resistance (25°C, no load) 120uS (0.00012S) RCD d ±.003 ≈Wire Resistance Max. Amp Qty per † Current Rating 25A at 25°C Type [.08] Gauge (Ω Ω Ω Ω Ω / inch) Rating 25°C Reel, Typ. Inductance 5nH Z] 22.G 024 [.6 22 AW ≈.0015Ω10 0A 10,00 Isolation Voltage 500V Soldering Temp. 260°C 10 Sec Z] 21.G 028 [.7 21 AW ≈.0011Ω10 5A 8,00 Operating Temp. Range -55°C to +175°C Z] 20.G 031 [.8 20 AW ≈.0009Ω20 0A 8,00 Amperage Derating Derate .667%/deg>25°C † Z] 18.G 040 [1 18 AW ≈.0006Ω20 5A 5,00 Requires suitably heavy-duty conductor paths to carry high currents SERIES Z and ZJ Cut & Form Options P/N DESIGNATION: ZJ2 - T W Most popular sizes are listed below but any W & H dimension from 0.2 to 1” [5 to 25mm] is available. Custom forming with standoffs also available. RCD Type CW &F Code H Packaging: B = Bulk, T = Tape & Reel C] 2.] 200 [5 .250 [6.3 Optional Cut & Form Codes: C2 - C25, per C] 12.] 25 [6.3 .250 [6.3 table. Leave blank if no forming (not applicable to H C] 25.] 30 [7.6 .250 [6.3 Z1206 which are formed as standard) W ± .02 [.5] ±.04 [1] C] 4.] 40 [10 .250 [6.3 Termination: W= Lead-free, Q= Tin/Lead (leave C] 5.] 50 [12.7 .250 [6.3 blank if either is acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com FA066B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 57