SAMTEC DW-03-19-T-D-950

ZW–06–13–L–D–787–118 F-218 (Rev 10OCT17) DW–11–20–T–D–825 HW–14–08–G–S–300–100 (2.54 mm) .100" DW, EW, ZW, HW-TH SERIES FLEXIBLE .025" SQ BOARD STACKERS Mates with: STACKER OTHER TYPE NO. PINS LEAD ROW SSW, SSQ, ESW, ESQ, PLATING HEIGHT OPTIONS CES, SLW, BSW, BCS, STRIP PER ROW STYLE OPTION OPTION SSM, HLE, PHF Cable Mates: IDSS, IDSD, SMSD, SMSS –S –“XXX” –“XXX” = Single = ZW or HW = Stacker Row Tail Length Height DW SPECIFICATIONS Specify LEAD STYLE (in inches) (in inches) = (2.79 mm) from chart (1.40 mm) For complete specifications (5.08 mm) .110" Tail –D .055" see www.samtec.com?DW, .200" www.samtec.com?EW, = Double minimum minimum LEAD OAL www.samtec.com?ZW or STYLE Row Example: Example: www.samtec.com?HW-TH (10.92) .430 –250 – 07 –250 Insulator Material: = (6.35 mm) = (6.35 mm) (13.46) .530 – 08 –T DW, EW, ZW: Black Glass POST .250" .250" = Triple (0.00).000 Filled Polyester (18.54) .730 – 09 MIN Row HW: Natural Liquid (2.79) (21.08) .830 –10 .110 Crystal Polymer Terminal Material: –11 (23.62) .930 STACKER –Q Phosphor Bronze OVERALL HEIGHT STACKER (26.16) 1.030 (5.08) LENGTH –12 HEIGHT Plating: = Double .200 (OAL) MIN Au or Sn over (31.24) 1.230 Row .200" –13 EW 50 µ" (1.27 µm) Ni ZW or (5.08 mm) = (8.38 mm) (36.32) 1.430 HW TAIL –14 Operating Temp Range: row space LENGTH .330" Tail (1.40) -55 °C to +125 °C with Gold (16.00) .630 –15 TAIL .055 -55 °C to +105 °C with Tin MIN (1.40) .055 –16 (11.30) .445 MIN RoHS Compliant: Yes (12.19) .480 –17 Lead–Free Solderable: –19 (33.78) 1.330 DW, EW, ZW: No, Lead Wave Only –LL (28.70) 1.130 –20 HW: Yes = Locking (8.38) Lead .330 (Shortest RECOGNITIONS dimension For complete scope of –F between the recognitions see = Gold flash on contact, tail and the 01 thru 50 www.samtec.com/quality Matte Tin on tail post is the ZW end that will = Custom Tail be crimped. FILE NO. E111594 (2.54) .100 x –L Available No. of Positions 01 50 = 10 µ" (0.25 µm) on tails from (2.54) Gold on contact area (2.29 mm) –S .100 of longer tail, .090" to Matte Tin on tail (7.87 mm) 02 100 .310" only.) (5.08) (2.54) Single row, 01 –D .200 .100 TAIL & 02 positions –G LENGTH 01 99 & –Q row not = 10 µ" (0.25 µm) available Gold on contact area 03 150 of longer tail, ALSO AVAILABLE –T Gold flash on balance (MOQ Required) (7.52) (5.08) –“XXX” HW .296 or –Q* .200 • Other platings = Polarized = High Temp –T Contact Samtec. Custom Tail Specify omitted 01 148 –Q* = Matte Tin pin position = Same as -T except middle row (2.54) Notes: .100 of pins For added mechanical stability, missing. Samtec recommends mechanical board spacers be (2.54) .100 used in applications with gold or selective gold plated connectors. TAIL Contact ipg@samtec.com for LENGTH (0.64) .025 SQ TYP more information. This Series is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.