SAMTEC ERM8-020-01-L-D-EM2-TR

F-218 (Rev 10OCT17) ERM8–060–01–L–D–EM2–TR ERM8–030–01–L–D–RA–L–K–TR (0.80 mm) .0315" ERM8-RA, ERM8-EM SERIES ® RUGGED EDGE RATE STRIPS ERM8-RA / ERM8-EM NO. OF POSITIONS PLATING OTHER Board Mates: ERM8 01 D RA TR PER ROW OPTION ERF8 OPTION ERM8-RA Cable Mates: ERCD SPECIFICATIONS –010, –013, –020, –L –K –TR For complete specifications and = 10 µ" (0.25 µm) = (6.00 mm) .236" = Tape & –025, –030, –040, –049, recommended PCB layouts see Gold on contact, DIA Polyimide Reel www.samtec.com?ERM8-RA or –050, –060, –070, –075 Matte Tin on tail Film Pick www.samtec.com?ERM8-EM & Place Pad No. of Positions x Insulator Material: Black LCP (0.80) .0315 + (13.00) .512 Terminal Material: (5.75) –L Phosphor Bronze .226 = Latching Latch Material: BeCu Plating: Au or Sn over 50 µ" (1.27 µm) Ni –DS (11.00) Current Rating: 2.2 A per pin = Differential Pair .433 (2 pins powered) (–013, –025 (5.01) Operating Temp Range: Ground Ground Pin positions only) .197 -55 °C to +125 °C Pin Signal Pins (Hot swap) Voltage Rating: 235 VAC / 318 VDC –DS RoHS Compliant: Yes 02 HIGH-SPEED CHANNEL PERFORMANCE (1.68) PROCESSING (6.25) (6.12) ERM8-RA/ERF8-RA .066 .246 .241 Rating based on Samtec reference Lead–Free Solderable: Yes channel.For full SI performance SMT Lead Coplanarity 01 28 (0.80) data visit Samtec.com (ERM8-RA): (0.35) (1.57) Gbps .0315 or contact SIG@samtec.com (0.10 mm) .004" max (010-050) .014 (1.00) .062 (1.40) (0.15 mm) .006" max (060-075)* –L .039 DIA .055 SMT Lead Coplanarity (ERM8-EM): (0.10 mm) .004" max (005-030) (0.12 mm) .005" max (040-075)* *(.004" stencil solution may be available; contact IPG@samtec.com) NO. OF POSITIONS PLATING OTHER ERM8 01 D EM2 TR PER ROW OPTION OPTION RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality –L = 10 µ" –EM2 –005, –010, –013, –020, –L –TR (0.25 µm) = (1.60 mm) .062" = Latching FILE NO. E111594 = Tape –025, –030, –040, –049, Gold on Thick PCB (Mates to ERF8 & Reel contact, Lead Style –05.0 ALSO AVAILABLE –050, –060, –070, –075 Matte Tin or –RA only) (MOQ Required) on tail (5.70) –DS OPTION • Other Positions .224 –DS PIN PAIR • Solder leads & weld tab for COUNT COUNT = Differential Pair No. of positions x (2.36 mm) .093" thick board (–013, –025 pos.only) 8 2x13 (0.80) .0315 + (9.00) .354 (6.80) (Hot Swap) • Other platings 2x25 16 EGPS = No. of positions x .268 Contact Samtec. (14.79) (0.80) .0315 + (10.00) .394 01 –EGPS .582 = Extended APPLICATIONS (3.82) (5.60) Guide Post Shield .150 .220 STANDARD POS. PART NOs. SERIES (–010, –020, –025, ™ 02 11 ASP-137971-01 ERM8-EM –030 pos.only) NEXUS5001 .org ™ (0.80) .031 POWER.org –EGPS 17 ASP-137974-01 ERM8-EM –DSS ARM/HSSTP 20 ASP-133811-01 ERM8-EM (3.20) = Differential Pair ™ 23 ASP-133811-02 ERM8-EM NEXUS5001 .org .126 (7.75) + Extended Guide ™ .305 POWER.org 35 ASP-135040-01 ERM8-EM Post Shield Notes: (2.10) (–025 pos. only) Patented .082 (Hot Swap) (5.20) .205 (0.80) Some lengths, styles and options are non-standard, .0315 –L OPTION –L non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.