SAMTEC ESQT-112-02-M-D-595

ESQT–125–02–L–Q–465 F-218 (Rev 10OCT17) ESQT–115–02–GF–D–600 ESQT–125–03–M–Q–310 (2.00 mm) .0787" ESQT SERIES FLEXIBLE ELEVATED SOCKET STRIPS High-retention Board Mates: contacts SPECIFICATIONS TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, For complete specifications see www.samtec.com?ESQT ESQT, PTT, TSH, TMMS Insulator Material: Cable Mates: Black Liquid Crystal Polymer TCMD Contact Material: Phosphor Bronze Plating: Sn or Au over APPLICATION 50 µ" (1.27 µm) Ni SPECIFIC OPTION: Current Rating (ESQT/TMMH): 4.5 A per pin NOTEBOOK 2.5" DISK (2 pins powered) Operating Temp Range: DRIVE INTERFACE -55 °C to +125 °C Insertion Depth: (2.62 mm) .103" to (5.03 mm) .198" with (0.38 mm) .015" wipe Max Cycles: 100 with 10 µ" (0.25 µm) Au RoHS Compliant: Yes (2.00 mm) Lead–Free Solderable: .0787" pitch Yes, for -S, -D & -Q (Wave only for -T, -5 & -6) Call for part number. RECOGNITIONS NO. PINS PLATING OTHER LEAD ROW BODY For complete scope 1 ESQT PER ROW OPTION OPTION STYLE OPTION HEIGHT of recognitions see www.samtec.com/quality Specify –S –“XXX” FILE NO. E111594 –“XXX” LEAD = Single = Body = Polarized –F 02 thru 50 STYLE Row Height Position = Gold flash on contact, from (in inches) (Indicate Matte Tin on tail chart –D position Note: (7.87 mm) = Double number) This Series is non-standard, –L .310" non-returnable. Row = 10 µ" (0.25 µm) minimum for Gold on contact, –S, –D, –Q –T Other Solutions Matte Tin on tail = Triple (9.53 mm) Row Surface .375" –M Mount minimum for = 20 µ" (0.51 µm) No. of positions x –Q See SQW and –T, –5, –6 (2.00) .0787 + (0.30) .012 Gold on contact, = Quad TLE Series. 300 06 Matte Tin on tail Row Low (2.00) No. of –GF OTHER SOLUTIONS .0787 rows –5 Profile = 15 µ" (0.38 µm) TYP x = Five See CLT Series. Gold on contact, (2.00) Row Gold flash on tail .0787 (Recommended for High –6 self-nesting) 295 01 Reliability = Six (–02 lead style only) See SMM Series. Row Paste In Hole (PIH) processing. Contact Samtec ASP Group. (6.35) Right- (Not recommended for .250 Angle stack through applications) TAIL BODY See SQW Series. (1.27) (1.52) A HEIGHT .050 .060 TM LEAD MAX MAX BODY MIN PC/104-Plus A STYLE TAIL HEIGHT Sockets (21.59) (13.72) (20.32) – 02 .850 .540 .800 See ESQT-368 and PTHF Series. (11.63) (3.76) (10.36) (0.50) .020 SQ (2.00) .0787 –03 .458 .148 .408 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.