F-218 (Rev 19JAN18) ET60T–D04–3–08–A04–S–R1–S RIGHT-ANGLE POWER/SIGNAL HEADER Mates with: POWER ET60S ROWS SIGNAL POSITIONS ET60T POSITIONS (LEFT) SPECIFICATIONS For complete specifications and –0 –00 recommended PCB layouts see = No Signal = No Signal www.samtec.com?ET60T –AXX = AC Power Positions Insulator Material: (–02, –03, –04, –05, –06) –3 –08 Black LCP Terminal Material: = 3 Rows = 3 Row only Signal: Phosphor Bronze –DXX Power: Copper Alloy = DC Power Positions –5 –01, –02, –03, –04, Plating: (–02, –03, –04, –05, –06, –07, –08, –09, –10) = 5 Rows Au or Sn over –05, –06, –07, –08 50 µ" (1.27 µm) Ni = 5 Row only Current Rating: –SXX* Power: 60 A max per blade = Split Power (2 pins powered) Signal: 2.8 A max (6 pins powered) –000 Note: Operating Temp Range: = No Power –SXX* & –T* are Preliminary -40 °C to +105 °C Voltage Rating: B 250 V max A (2.54) .100 C RoHS Compliant: Yes (10.00) .394 PROCESSING Lead-Free Solderable: (0.64) .025 SQ Yes A + B + C + (26.98) 1.062 (2.84) .112 A + B + C + (33.98) 1.338 RECOGNITIONS (1.27) (7.50) (5.50) For complete scope of .217 .050 .295 recognitions see www.samtec.com/quality (10.00) .394 (2.50) .098 (29.25) (24.90 FILE NO. E111594 1.152 .980 (9.40) .370 (5.00) .197 (3.33) CREEPAGE (5.17) (4.81) .1131 (3.00) (3.00) .118 .204 (5.50) .118 .189 DIA AND CLEARANCE .217 ET60T–D03–3–08–A03–X–R1–S D (2.00) A .079 C (10.00) .394 Selectively loading contacts achieves customer specific creepage and (0.64) .025 SQ clearance requirements. A + D + C + (27.21) 1.071 A + D + C + (34.21 ) 1.347 Contact asp@samtec.com (5.50) (1.27) .050 .217 (24.45) Notes: .963 Some lengths, styles and options are non-standard, non-returnable. ™ EXTreme Ten60Power is a trademark of Molex (5.50) .217 (5.64) .222 (4.57) .180 Incorporated and is dual ET60T–D04–5–03–A04–X–R1–S ® sourced by Molex Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. ET60T–D04–3–08–A04–L–R1–T ET60T–D04–5–03–A04–L–R1–S ET60T–D04–3–08–000–S–R1–S ET60T SERIES RIGHT-ANGLE POWER/SIGNAL HEADER POWER GUIDE OPTION PLATING TAIL POSITIONS (RIGHT) POST (Required callout) –R1 –H –AXX –L = Right-angle = Hot Swap = AC Power Positions = 10 µ" (0.25 µm) Gold on contact, –S Through-hole (Leave blank for (–02, –03, –04, –05, –06) Matte Tin on tail = Side (Use with no Hot Swap (Not available for 5 rows) Guide Post (1.60 mm) .062" –DXX thick card) = DC Power Positions –S –T* (–02, –03, –04, –05, –06, = 30 µ" (0.76 µm) Gold on contact, = Top –07, –08, –09, –10) Matte Tin on tail Guide Post –SXX* = Split Power –000 = No Power Note: –SXX* & –T* are Preliminary A + D + C + (11.47) .452 POWER POWER A C POSITIONS POSITIONS DC AC D (LEFT) (RIGHT) (2.00) POWER POWER .079 (5.50) (7.50) –02 –02 (14.98) .217 .295 .590 (11.00) (15.00) –03 –03 .433 .591 (16.50) (22.50) –04 –04 .650 .886 C A (0.64) .025 SQ A + D + C + (19.71) .776 (22.00) (30.00) –05 –05 .866 1.181 ET60T–D04–5–03–A04–X–R1–T (27.50) (37.50) –06 –06 1.083 1.476 (33.00) –07 –07 N/A 1.299 (38.50) N/A –08 –08 1.516 C A (44.00) –09 –09 N/A 1.732 (49.50) –10 –10 N/A 1.949 A + C + (21.50) .846 SIGNAL SIGNAL A + C + (28.50) 1.122 POSITIONS POSITIONS B D PER ROW PER ROW (3 Row) (5 Row) (1.27) (5.50) –01 N/A .050 .217 (2.00) –02 .079 (4.00) –03 (3.33) .157 .1131 (29.25) 1.152 (6.00) DIA –04 .236 (17.78) –08 .700 (8.00) –05 .315 (10.00) –06 .394 (5.50) (4.50) .177 (5.50) .217 .217 (12.00) –07 .472 (14.00) ET60T–D04–0–00–A04–X–R1–S –08 .551 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.