FC1–25–02–T–WT F-218 ZF1–25–01–T–WT FC1–20–01–T ZF1–10–01–T–WT (1.00 mm) .0394" ZF1, FC1 SERIES FLAT FLEXIBLE CABLE (FFC) SOCKET Mates with: NO. OF LEAD PLATING FJ OPTION ZF1 WT POSITIONS STYLE OPTION SPECIFICATIONS For complete specifications and recommended PCB layouts –01 see www.samtec.com?ZF1 –T –WT –TR = Contact = Matte Tin = Weld = Tape & Reel Insulator Material: –05, –10, –15, Bottom Tab Packaging Liquid Crystal Polymer Contact Material: –16, –20, –25, –30 Phosphor Bronze –02 Plating: = Contact (1.50) APPLICATION (No. of pins x (1.00) .03937) Sn over 40 µ" (1.02 µm) Ni Top .059 + (5.85) .230 Weld Tab: Phosphor Bronze (0.25) (10 positions 01 Operating Temp Range: ALSO .010 only) -55 °C to +105 °C AVAILABLE RoHS Compliant: Yes (MOQ Required) PROCESSING • Other positions Lead-Free Solderable: Yes Contact Samtec. SMT Lead Coplanarity: (0.10 mm) .004" max (No. of pins x (1.00) .03937) + (7.00) .276 RECOGNITIONS (5.30) .209 For complete scope Note: (3.00) of recognitions see Some lengths, .118 www.samtec.com/quality styles and options are non-standard, (1.00) (4.9) .19 non-returnable. .03937 FILE NO. E111594 Mates with: NO. OF LEAD PLATING FJ OPTIONS FC1 POSITIONS STYLE OPTION SPECIFICATIONS For complete specifications and recommended PCB layouts –LC –T –01 see www.samtec.com?FC1 = Locking Clip = Tin = Vertical Insulator Material: (Manual –05, –10, –15, –20 & –25 Liquid Crystal Polymer placement Contact Material: –02 required) Phosphor Bronze = Horizontal (–01 only) Plating: ALSO AVAILABLE Sn over 50 µ" (1.27 µm) Ni (MOQ Required) Operating Temp Range: –WT (No. of pins x (1.00) .03937) -55 °C to +105 °C • Low insertion force = Weld Tab + (2.33) .092 Max Cycles: contacts available (–02 only) 25 with FJ (No. of pins x (1.00) .03937) RoHS Compliant: Contact Samtec. + (1.00) .03937 03 01 (1.40) Yes –K .055 = (4.00 mm) .158" (2.77) PROCESSING DIA Polyimide film .109 Pick & Place Pad (1.42) Lead-Free Solderable: (–01 only) .056 Yes 02 (1.00) .03937 – LC OPTION SMT Lead Coplanarity: (0.10 mm) .004" max –TR = Tape & Reel Packaging RECOGNITIONS (5.18) For complete scope (6.35) .204 (1.19) of recognitions see .250 .047 www.samtec.com/quality Note: (4.09) (0.30) .012 Some lengths, FILE NO. E111594 .161 – 02 styles and options – 01 are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.