SAMTEC FSI-150-10-L-D-AD

F-218 (Rev 10OCT17) FSI–120–06–L–D–AD FSI–150–03–G–D–E–AD FSI–150–03–G–D–AD (1.00 mm) .0394" LOW-PROFILE & ELEVATED ONE-PIECE Choice of board stacking SPECIFICATIONS profiles For complete specifications and recommended PCB layouts see www.samtec.com?FSI Insulator Material: Liquid Crystal Polymer Contact Material: Short version BeCu or optional Current Rating: ALSO AVAILABLE threaded inserts 2.8 A per pin (MOQ Required) (2 pins powered) Operating Temp Range: • No alignment pin -55 °C to +125 °C Plating: • Top side alignment pin Au over 50 µ" (1.27 µm) Ni • Bottom side alignment pin RoHS Compliant: Yes • Other platings Contact Samtec. PROCESSING Lead-Free Solderable: • Threaded Yes insert SMT Lead Coplanarity: option (0.10 mm) .004" max (05-30) (0.15 mm) .006" max (50)* *(.004" stencil solution may be available; contact IPG@samtec.com) Compression Board: BODY PLATING Gold Pads required PINS PER ROW 1 FSI HEIGHT OPTION RECOGNITIONS For complete scope of recognitions see –03 –G www.samtec.com/quality = 3.00 mm = 10 µ" (0.25 µm) Gold 10, 20, 30 & 50 (–03 only) (Insert/Screw Option) –06 FILE NO. E111594 = 6.00 mm –L 05, 10, 20, 30, 50 = 10 µ" (0.25 µm) (Short Version) Gold on contact, –10 Matte Tin on tail = 10.00 mm (Not available with –03 body height) (No. of positions x (0.89) (1.00) .03937) + .035 (0.76) .030 01 (8.22) Notes: .324 Applications requiring 40-50 positions without threaded (No. of positions x (1.00) .03937) inserts, please contact + (7.24) .285 B (0.64) Samtec Interconnect .025 Processing Group. BODY TYP A B HEIGHT Some lengths, styles and –06 & –10 (3.00) (8.76) options are non-standard, Contact Detail –03 02 .118 .345 non-returnable. (0.36) .014 (6.00) (9.02) (No. of positions x (1.00) .03937) + (14.10) .555 –06 .236 .355 (1.40) Other Solutions (10.00) (9.02) Insert Option (10, 20 & 30 pins/row) –10 .055 .394 .355 Low (72.09) 2.838 Profile A See SEI Series. (32.62) 1.284 (1.00) (1.07) .03937 (0.15) .042 .006 .100" DIA (1.40) Short Version –03–AD .055 (2.54 mm) Shown Pitch Double Row Version –03, –06, –10 Insert Option (50 pins/row) See SIB Series. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. FSI–150–06–L–D–AD FSI–120–06–L–S–AD FSI–120–03–G–S–AD FSI–130–10–L–D–E FSI SERIES LOW-PROFILE & ELEVATED ONE-PIECE Choice of board stacking profiles Single or double row Optional alignment pins on top and bottom Short version or optional threaded inserts ALIGNMENT ROW OPTION OTHER OPTION INSERT OPTION OPTION Leave blank for Short Version Leave blank for –S –WT (No screw down inserts or holes) no Alignment Pin = Single Row = Weld Tab (Available with 5, 10 & 20 (Available with –S row option & –E –AD pins with –AD alignment pin) –06 & –10 body height only) = #2-56 x 1/16" screw thread = Alignment Pin Top & Bottom –D –K –M = Double Row = Polyimide Film Pick & Place Pad = 2.00 mm x 0.40 mm screw thread (50 position with threaded insert option only) (71.20) 2.803 –P = Plastic Pick & Place Pad (5.08 mm) .200" x (12.45 mm) .490" (50 not available with –E) (Not available with –S row option or –03 body height) Insert Option (50 pins/row) –TR (No. of positions x = Tape & Reel Packaging (1.00) .03937) + (5.00).197 (1.25) (4.60) .049 (5.30) .181 (0.87) .209 .034 (No. of positions x (1.00) .03937) 01 05 + (8.60) .339 –03, –06 & –10 (0.36) .014 Contact Detail A (1.40) .055 A (1.60) (No. of positions x (1.00) .03937) .063 + (14.70) .579 (2.25) Short Version –03–AD Shown .089 Insert Option (10, 20 & 30 pins/row) –WT Option Single Row Version –03, –06, –10 (–06 & –10 Body only) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.