SAMTEC FT5-15-01-L-RA-K-TR

F-218 FT5–15–03.0–L–DV–TH FT5–15–01.0–L–DV–TH FS5–15–04.0–L–DV–TH FS5–30–04.0–L–DV–TH FT5–30–01–L–RA (0.50 mm) .0197" FT5, FS5 SERIES HIGH-SPEED FLOATING CONTACT SYSTEM FT5 Mates with: NO. OF LEAD PLATING ROW FS5 FT5 OPTION TH POSITIONS STYLE OPTION OPTION FS5 Mates with: FT5 Required SPECIFICATIONS –01.0 –DV callouts Leave blank = 1 mm = Vertical For complete specifications and –L –15, –30 for –RA Body recommended PCB layouts see = 10 µ" (0.25 µm) (Per Row) –P www.samtec.com?FT5 or Height Gold on contact, –RA = Pick & www.samtec.com?FS5 –TH Matte Tin on tail = Right-angle No. of Place Pad = Through-hole Insulator Material: –03.0 positions (–DV only) No. of positions per row weld tab Black Liquid Crystal Polymer = 3 mm per row x (0.50) .01969 Contact Material: x (0.50) .01969 Body + (10.10) .397 Phosphor Bronze (FT5) + (6.80) .268 –K Height BeCu (FS5) (0.20) = (5.00 mm) (0.50) Weld Tab: .008 .197" DIA .01969 Phosphor Bronze –01 Polyimide 02 Plating: = Right- (5.50) (8.65) Film Pick & Au or Sn over .217 angle (3.10) .341 (4.00) 01 Place Pad 50 µ" (1.27 µm) Ni .122 .157 Current Rating: (–RA only) (0.65) 1.8 A per pin 01 (0.50) .01969 .026 (2 pins powered) (1.27) (1.40) -TR (1.38) Operating Temp Range: .050 (4.18) .055 .054 = Tape & Reel A -55 °C to +125 °C .164 RoHS Compliant: 02 (0.20) (0.20) Yes (2.25) (2.60) .008 .008 Lead-Free Solderable: .089 .102 No. of positions No. of positions Yes per row x per row x LEAD STYLE A (0.50) .01969 (0.50) .01969 + (5.58) .219 –01.0 (3.72) .146 + (8.00) .315 RECOGNITIONS –03.0 (5.72) .225 –DV OPTION –RA OPTION For complete scope of recognitions see www.samtec.com/quality FILE NO. E111594 NO. OF PLATING LEAD FS5 DV TH K TR POSITIONS OPTION STYLE MATED HEIGHT –04.0 –K MATED HEIGHT* = 4 mm = (8.25 mm) –TH –L –15, –30 Body .325" DIA FS5 = Through-hole FT5 LEAD STYLE = 10 µ" (0.25 µm) (Per Row) LEAD Height Polyimide weld tab Gold on contact, –01.0 –03.0 STYLE Film Pick & Matte Tin on tail (5.00) (7.00) Place Pad No. of positions –04.0 .197 .276 per row x *Processing conditions will (0.50) .01969 –TR affect mated height. + (6.80) .268 = Tape & Reel (0.50) 01 .01969 (9.40) .370 ALSO AVAILABLE 02 (MOQ Required) (1.27) • Other lead counts .050 (4.40) • Surface mount weld tab .173 (0.12) (0.30) Contact Samtec. (0.45) .005 .012 Note: Floating contact system .018 (1.40) (6.65) No. of provides 0.50 mm float in X .055 .262 positions and Y directions. per row x (0.50) .01969 Note: Some lengths, + (3.00) .118 styles and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.