SAMTEC FW-20-03-L-D-285-075

F-218 (Rev 10OCT17) FW–20–05–F–D–610–065 FW–12–05–G–D–530–101 (1.27 mm) .050" FW-SM SERIES SMT MICRO BOARD STACKER Low-profile or skyscraper styles Board Mates: SPECIFICATIONS CLP, FLE For complete specifications and Cable Mates: recommended PCB layouts FFSD see www.samtec.com?FW-SM Insulator Material: APPLICATIONS Black Liquid Crystal Polymer Terminal Material: Variable Phosphor Bronze board spacing Plating: Sn or Au over 50 µ" (1.27 µm) Ni FW MATED Operating Temp Range: HEIGHT -55 °C to +125 °C CLP RoHS Compliant: Yes PROCESSING LEAD STYLE MATED FW CLP HEIGHT* Lead-Free Solderable: (8.13) Yes FW-XX-03-X-X-233-065 .320 – 02 SMT Lead Coplanarity: (9.91) (0.10 mm) .004" max (02-30) FW-XX-03-X-X-303-065 .390 (0.15 mm) .006" max (31-50)* (1.27 mm x 1.27 mm) *Processing conditions will affect mated height. Surface *(.004" stencil solution .050" x .050" micro pitch may be available; contact mount IPG@samtec.com) RECOGNITIONS For complete scope NO. PINS PLATING STACKER POST LEAD OPTION of recognitions see FW D PER ROW OPTION HEIGHT HEIGHT STYLE www.samtec.com/quality FILE NO. E111594 Specify –“XXX” LEAD = Stacker –ES –F –“XXX” STYLE 02 thru 50 Height = End Shroud = Gold flash on post, = Post Height ALSO AVAILABLE from (in inches) (–075 post height only. Matte Tin on tail (in inches) (MOQ Required) chart Mate only with CLP) (5.46 mm) .215" to Example: (1.65 mm) • Smaller stack heights –L (15.49 mm) .610" –250 .065" STACKER Contact Samtec. LEAD STACKER = 10 µ" (0.25 µm) stacker height only = (6.35 mm) minimum + POST STYLE HEIGHT Gold on post, 9 pins/row min. .250" Matte Tin on tail Example: (5.46) (8.51) (7.11) (10.16) –03 to to –EP .215 .335 .280 .400 –065 = End Shroud –G = (1.65 mm) (8.64) (15.49) (10.29) (17.15) –05 to to with Guide Post .340 .610 .405 .675 = 10 µ" (0.25 µm) .065" (–075 post height only. Gold on post, Mate only with CLP.) Gold flash on tail No. of positions x (5.46 mm) .215" (1.27) .050 to (15.49 mm) .610" 02 100 (3.45) stacker height only) .136 9 pins/row min. (1.19) x (3.42) .047 (4.76) (5.08) .135 .188 .200 –A (1.27) = Alignment Pin 01 99 POST HEIGHT (4.27) (4.06) .050 (1.27) .050 (3 positions min.) .168 (1.65) .065 .160 (0.76) (5.46 mm) .215" to MIN .030 (15.75 mm) .620" (0.41) .016 SQ stacker height only –ES –P –P (1.91) = Pick & Place Pad Notes: (3.05) .075 For added mechanical stability, .120 (5 positions min.) DIA (0.86) Samtec recommends STACKER .034 mechanical board spacers be HEIGHT –TR used in applications with gold or (2.51) (2.92) = Tape & Reel selective gold plated connectors. .099 .115 (0.89) (Max overall height = Contact ipg@samtec.com for .035 Post+Stacker Height+ more information. –EP DIA Pad+Alignment Pin = –A This Series is non-standard, .700 (17.78)) non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.